1. Product Overview
Read this manual carefully before use, and retain it for future reference.

Components
The Xiaomi 17 Ultra Camera Accessory includes the following parts:
- Hand Strap Eyelet
- Video Button
- Status Indicator
- Shutter Button
- Magnetic Charging Port
- Hand Strap
- Magnetic Charging Cable

2. Setup and Installation
Installation Instructions for Grip
- Align the phone's button side with the corresponding button side of the grip, and gently slide the phone in, ensuring the button edge of the phone fits perfectly with the inner side of the grip.

Align the phone's button side with the grip. - Gently press on the left side of the phone (the side opposite the buttons) to fully seat the phone into the grip.
- Ensure that all sides fit tightly with no looseness. Installation is complete.
Disassembly Instructions for Grip
- Gently push the upper part of the phone outward from the rear lens area to separate the two top corners of the phone from the grip.
- Continue to slide the upper half of the phone out of the grip to separate the grip from the phone.
- Pull the phone out completely to finish removal.
3. Operation
Power On
Press and hold the shutter button to power on. The status indicator will light up.
Pairing & Connection
First-time pairing process
When connecting for the first time, after properly attaching the grip to the phone, press and hold the shutter button to power it on. A pop-up will appear on the phone prompting for connection. Select 'Connect' to start pairing. Once pairing is complete, a Bluetooth connection successful pop-up will appear.
Reconnecting with a paired device
Press and hold the shutter button to wake up the grip. It will automatically reconnect via Bluetooth, and a connection success notification will appear on Xiaomi HyperIsland.
If it does not reconnect automatically, go to Settings > Bluetooth and check the 'Available devices' list. Select the device to connect manually.
Power Management
Charging Function
The charging port is located on the inner side of the grip. Before charging, please remove the phone from the grip.
Power Indicator
A widget can be added to the Home screen (select Battery > Add to Home screen) to show the current battery level of the grip.
Auto Power Off
If the grip remains inactive for 4 hours, it will automatically disconnect Bluetooth and power off. To turn it back on, press and hold the shutter button.
Firmware Update
Once paired with the grip, go to Settings > Camera grip > Update firmware to check for new firmware versions. If an update is available, tap to start the upgrade.
Camera Features
Shutter Button
Not entering the Camera App:
| Action | Function | Configuration |
|---|---|---|
| Press and hold | Launch camera / Launch camera and take photo | Settings - Camera Grip - Quick Launch |
After pairing, the long-press function of the shutter button can be set to "Launch camera," "Launch camera and take photo," or "Don't launch" under Settings > Camera grip. You can also select a specific camera mode.
Entering the Camera App and going to the Take a photo/video page:
| Action | Function | Configuration |
|---|---|---|
| Half-Press | Lock the current focus area | - |
| One click | Take a photo (start/end recording for video mode) | - |
| Press and hold | Continuous shooting (disabled by default) | Camera settings - Camera grip - Shutter button - Burst; or Settings - Camera grip - Set up grip button - Shutter button - Burst; |
By default, continuous shooting is disabled. To enable it, go to Camera settings > Camera grip (or Settings > Camera grip > Set up grip button), then select 'Burst' under Shutter button.
Entering the Camera App and going to the Album:
| Action | Function |
|---|---|
| Half-Press | Return to the Photo/Video screen of the camera |
Video Button
Entering the Camera App and going to the Take a photo/video page:
| Action | Function | Configuration |
|---|---|---|
| One click | Start/end recording for video | Camera settings - Camera grip - Video button; or Settings - Camera grip - Set up grip button - Video button |
By default, it quickly switches to video mode and starts recording. It can also be customized to functions such as Focal length switching or Aspect ratio. To configure, go to Camera settings > Camera grip (or Settings > Camera grip > Set up grip button) and customize it under video button.
4. Status Indicators
The status indicator provides visual feedback on the grip's current state.
Grip Charging Scenario
| Indicator | Status |
|---|---|
| Solid red | In charging |
| Solid green | Fully charged |
Bluetooth Not Connected / Pairing / Connecting / Disconnecting
| Indicator | Status |
|---|---|
| Red light flashing | Bluetooth not connected / Bluetooth state changing (pairing/connecting/disconnecting), and the grip is charging or has low battery (< 20%) |
| Green light flashing | Bluetooth not connected / Bluetooth state changing (pairing/connecting/disconnecting), and the grip has sufficient battery (≥ 20%) |
After Bluetooth Connection / After Entering the Camera
| Indicator | Status |
|---|---|
| Solid red | Connected or in use, and the grip is either charging or has low battery (< 20%) |
| Solid green | Connected or in use, and the grip has sufficient power (≥ 20%) |
Note: The indicator will turn off after 30 seconds of no operation.
5. Important Safety Information
Before using and operating this device, please read and follow the following precautions to ensure that the device performs optimally and is used correctly and safely.
- Please use the device within the temperature range of 0°C~35°C, and store the device within the temperature range of -20°C~45°C. Malfunction of the device may be caused when the ambient temperature is too high or too low.
- Avoid interference from radio waves, always keep the device at least 15 centimeters away from implanted medical devices (e.g., pacemakers, cochlear implants, hearing aids, etc.) when in use, and consult the manufacturer for restrictions on this device.
- This device and its accessories may contain small parts. Keep the device and its accessories out of the reach of children to prevent children from choking and other risks caused by swallowing of small parts.
- Do not disassemble or alter the battery, insert foreign objects, or immerse it in water or other liquids, as this may cause battery leakage, overheating, fire or explosion.
- Do not drop, hit, crush or puncture the battery. Avoid exposing the battery to large external pressures that can cause internal short circuits and overheating. Do not continue to use the battery if it appears to be severely inflated.
- Do not place the device and the battery close to open flames and heating devices where high temperatures may be generated, e.g. candle, stove fire, sunlight, microwave, warmer, oven, etc.
- Do not expose the device and accessories to rain or moisture, which may cause danger of fire or electric shock.
- Do not try to repair the device yourself. If any part of the device does not work properly, consult Xiaomi after-sales service in time, or bring your device to Xiaomi official after-sales service outlets for inspection and repair.
- Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device.
- Use accessories approved by the manufacturer and compatible with this device model. Use of other types of accessories may violate the warranty terms of this device and may cause safety incidents.
- This product contains a non-removable built-in battery; it is strictly prohibited to disassemble this product yourself. Do not attempt to replace the battery yourself to avoid battery breakage or other dangers.
6. Precautions
- The wireless charging function is not available for your phone after the installation of the camera grip. Please remove the grip when you need to charge your phone wirelessly.
- The Xiaomi 17 Ultra Photography Kit can only be used with the Xiaomi 17 Ultra. For future compatible models, please refer to the official product website for updates.
- All functions of Xiaomi 17 Ultra Photography Kit are only effective within Xiaomi Camera APP, and cannot be used with third-party camera APP.
- Xiaomi 17 Ultra Photography Kit has OTA upgrade function. No notice will be given for new or changed functions added or changed by OTA, but the changes will be updated to the latest version of the manual.
7. Specifications
| Feature | Detail |
|---|---|
| Brand Name | XIAOMI |
| Model Number | Xiaomi 17 Ultra (25127PS03S) |
| Compatible Model | Xiaomi 17 Ultra |
| Battery Capacity | 270mAh (typical) / 262mAh (minimum) |
| Battery Type | Lithium Ion Polymer Battery |
| Input | 5V=280mA |
| Connection | Bluetooth® wireless technology |
| Battery Included | Yes |
| Origin | Mainland China |
| Package Weight | 0.7 kg |
| Package Dimensions | 40 cm (L) x 20 cm (W) x 15 cm (H) |
8. User Tips
No specific user tips were provided in the input data (reviews.txt or qa.cleaned.json). However, based on the product's features, here are some general tips:
- Always ensure the grip is securely attached to your Xiaomi 17 Ultra phone before use to prevent accidental drops.
- For optimal performance and access to all features, use the grip exclusively with the official Xiaomi Camera APP. Third-party camera apps may not support all functionalities.
- Remember to remove the phone from the grip if you need to charge your phone wirelessly, as the grip itself does not support wireless charging.
- Customize the shutter and video button functions in the camera settings to match your shooting style for a more intuitive experience.
- Keep an eye on the grip's battery level via the Home screen widget to ensure it's always ready for use.
9. Frequently Asked Questions (FAQ)
No specific Q&A content was provided in the input data (qa.cleaned.json). Here are some general FAQs based on common product inquiries:
- Q: Is the grip compatible with other Xiaomi phones?
A: The Xiaomi 17 Ultra Photography Kit is designed specifically for the Xiaomi 17 Ultra. Compatibility with future models will be announced on the official product website. - Q: Can I use the grip with third-party camera applications?
A: All functions of the Xiaomi 17 Ultra Photography Kit are only effective within the Xiaomi Camera APP. It cannot be used with third-party camera applications. - Q: How do I check the battery level of the grip?
A: You can add a battery widget to your phone's Home screen. Go to Home screen settings, select Battery, and add the widget to display the current battery level of the grip. - Q: What does it mean if the status indicator is flashing red?
A: A flashing red light indicates that Bluetooth is not connected or is changing state (pairing/connecting/disconnecting), and the grip is either charging or has low battery (< 20%). - Q: How do I update the grip's firmware?
A: Once paired with the grip, go to Settings > Camera grip > Update firmware to check for new versions. If an update is available, tap to start the upgrade.
10. Warranty and Support
Warranty Notice
As a Xiaomi consumer, you benefit under certain conditions from additional warranties. Xiaomi offers specific consumer warranty benefits which are in addition to, and not instead of, any legal warranties provided by your national consumer law. The duration and conditions related to the legal warranties are provided by respective local laws. For more information about the consumer warranty benefits, please refer to Xiaomi's official website: www.mi.com/global/support/warranty.
Except as prohibited by laws or otherwise promised by Xiaomi, the after-sales services shall be limited to the country or region of the original purchase. Under the consumer warranty, to the fullest extent permitted by law, Xiaomi will, at its discretion, repair, replace or refund your product. Normal wear and tear, force majeure, abuse or damage caused by the user's negligence or fault are not warranted. The contact person for the after-sale service may be any person in Xiaomi's authorized service network, Xiaomi's authorized distributors or the final vendor who sold the products to you. If in doubt please contact the relevant person as Xiaomi may identify.
The present warranties do not apply in Hong Kong and Taiwan.
Products which were not duly imported and/or were not duly manufactured by Xiaomi and/or were not duly acquired from Xiaomi or a Xiaomi's official seller are not covered by the present warranties. As per applicable law you may benefit from warranties from the non-official retailer who sold the product. Therefore, Xiaomi invites you to contact the retailer from whom you purchased the product.
Manufacturer Information
Manufacturer: Xiaomi Communications Co., Ltd.
Manufacturer postal address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085
Contact: contact@support.mi.com
User Manual (PDF)
A PDF version of the user manual is available for download: User manual (PDF)