Kavery 06H 121 026

Contents

Kavery Auxiliary Engine Cooling Water Pump

Model: 06H 121 026 | OEM: 04L 965 567

1. Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Kavery Auxiliary Engine Cooling Water Pump. This 12V water pump (Model: 06H 121 026, OEM: 04L 965 567) is designed for use in the engine cooling systems of various Audi, VW, Seat, and Skoda vehicles, including A3, A4, A5, A6, Q2, Q3, TT, Caddy, CC, Golf MK7, Passat, and Tiguan models. Please read this manual thoroughly before proceeding with installation or use.

2. Safety Information

WARNING!

  • Always disconnect the vehicle's battery before performing any work on the cooling system or electrical components to prevent electrical shock or damage.
  • Allow the engine and cooling system to cool completely before servicing to avoid burns from hot coolant or engine components.
  • Wear appropriate personal protective equipment (PPE), including safety glasses and gloves, during installation and maintenance.
  • Ensure the vehicle is securely supported on jack stands if working underneath it.
  • Dispose of old coolant and parts responsibly according to local environmental regulations.
  • This product contains small parts and is not suitable for children under 36 months due to choking hazards. Keep out of reach of children.
  • Improper installation or use can lead to vehicle damage or personal injury. If you are unsure about any step, seek professional assistance.

3. Product Specifications

Attribute Detail
Product Name Water Pump Assembly
Brand Kavery
Model Number 06H 121 026
OEM NO. / Manufacturer Part Number 04L 965 567
Voltage 12V
Placement on Vehicle Engine
Country/Region of Manufacture China
High-concerned chemical None
Package Dimensions (L x W x H) 11 cm x 9 cm x 13 cm
Package Weight 0.66 kg

4. Product Overview

The Kavery Auxiliary Engine Cooling Water Pump is a critical component for maintaining optimal engine temperature. It assists the primary water pump in circulating coolant through the engine and heating system, especially under specific operating conditions or for auxiliary cooling circuits.

Detailed view of the Kavery auxiliary water pump, showing part number and voltage.

Figure 1: Detailed view of the Kavery auxiliary water pump (04L 965 567 1PC).

Front view of the Kavery auxiliary water pump, OEM 04L 965 567.

Figure 2: Front view of the Kavery auxiliary water pump.

Angled view of the Kavery auxiliary water pump, showing inlet and outlet.

Figure 3: Angled view of the Kavery auxiliary water pump, highlighting connections.

Top-down view of the Kavery auxiliary water pump.

Figure 4: Top-down view of the Kavery auxiliary water pump.

Side view of the Kavery auxiliary water pump, highlighting electrical connector.

Figure 5: Side view of the Kavery auxiliary water pump, showing the electrical connector.

Bottom view of the Kavery auxiliary water pump, showing mounting points.

Figure 6: Bottom view of the Kavery auxiliary water pump, illustrating mounting points.

Top view of the Kavery auxiliary water pump.

Figure 7: Top view of the Kavery auxiliary water pump.

Video 1: Product showcase of the Kavery auxiliary water pump.

5. Setup and Installation

The installation of this auxiliary water pump is described as 'Easy Installation' (安装简易). However, due to the complexity of automotive cooling systems and the critical role of this component, professional installation by a qualified mechanic is highly recommended.

General steps for installation typically include (but are not limited to):

  1. Preparation: Ensure the engine is cool. Disconnect the negative terminal of the vehicle's battery. Drain the engine coolant from the system.
  2. Locate the Old Pump: Identify the existing auxiliary water pump in your vehicle's engine bay. Refer to your vehicle's service manual for the exact location.
  3. Remove Old Pump: Disconnect electrical connectors and coolant hoses from the old pump. Be prepared for residual coolant. Remove any mounting bolts securing the pump.
  4. Install New Pump: Position the new Kavery auxiliary water pump in place. Secure it with the appropriate mounting bolts.
  5. Connect Hoses and Electrical: Reconnect all coolant hoses, ensuring clamps are tight and secure. Reattach the electrical connector.
  6. Refill Coolant: Refill the cooling system with the manufacturer-recommended coolant. Bleed the air from the system as per your vehicle's service manual.
  7. Test: Reconnect the battery. Start the engine and check for leaks. Monitor engine temperature and coolant levels.

Note: Always consult your specific vehicle's service manual for detailed, model-specific installation instructions and torque specifications.

6. Operating Instructions

The Kavery Auxiliary Engine Cooling Water Pump operates automatically as part of your vehicle's engine management system. It is designed to activate when additional coolant circulation is required, such as:

  • During engine shutdown to prevent heat soak.
  • To provide additional cooling for turbochargers or other specific engine components.
  • To assist in heating the cabin more efficiently.

No direct user interaction is required for the operation of this pump. Its function is managed by the vehicle's onboard computer (ECU).

7. Maintenance

The auxiliary water pump itself is generally a sealed unit and does not require routine maintenance. However, regular maintenance of the overall cooling system is crucial for its longevity and proper function:

  • Coolant Level Check: Regularly check the coolant level in the expansion tank and top up if necessary with the correct type of coolant.
  • Coolant Quality: Follow your vehicle manufacturer's recommendations for coolant flush and replacement intervals. Old or contaminated coolant can lead to corrosion and pump failure.
  • Hose Inspection: Periodically inspect all coolant hoses for cracks, leaks, or signs of wear. Replace any damaged hoses promptly.
  • Leak Detection: Be vigilant for any signs of coolant leaks around the pump or elsewhere in the cooling system.

8. Troubleshooting

If you suspect an issue with your auxiliary water pump or cooling system, consider the following common problems:

  • Engine Overheating: If the engine temperature gauge rises above normal, it could indicate a cooling system issue, potentially including a faulty auxiliary water pump.
  • Coolant Leaks: Visible coolant leaks around the pump or hoses suggest a problem with the seals, housing, or connections.
  • Unusual Noises: Whining, grinding, or rattling noises from the pump area could indicate internal bearing failure or impeller damage.
  • No Heat in Cabin (or inconsistent): A malfunctioning auxiliary water pump can sometimes affect the vehicle's heating system.
  • Check Engine Light: A diagnostic trouble code (DTC) related to the cooling system or auxiliary pump may be stored in the ECU. A professional diagnostic scan is recommended.

If you experience any of these symptoms, it is advisable to have your vehicle inspected by a qualified mechanic.

9. User Tips

Based on general user experiences with automotive parts:

  • Always verify the OEM part number (04L 965 567 or 04L 965 567A) against your vehicle's existing part to ensure compatibility before purchase and installation.
  • When replacing the pump, consider replacing related components like hoses and O-rings to prevent future leaks.
  • Use only high-quality, manufacturer-approved coolant to protect your entire cooling system.

10. Warranty and Support

This product typically comes with a 2-year or 40,000-kilometer guarantee. For specific warranty terms, technical support, or assistance with product-related issues, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

For additional documentation, you may refer to the original user manual PDF: Kavery Auxiliary Water Pump User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.