1. Introduction
The HT-203U is a compact, plug-and-play infrared thermal imager designed to connect directly to your smartphone. It provides high-definition thermal imaging capabilities, making it an ideal tool for quickly identifying heat loss in buildings, detecting HVAC leaks, and pinpointing potential overheating issues in electrical equipment. This manual provides essential information for the safe and effective use of your HT-203U thermal imager.
2. Safety Information
⚠️ Disclaimer:
Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
- Do not expose the device to extreme temperatures outside its operating range (-15°C to 550°C).
- Avoid direct exposure of the lens to strong light sources, such as the sun, for extended periods.
- Keep the device dry and away from liquids.
- Do not attempt to disassemble or modify the device, as this will void the warranty and may cause damage.
- Use the device in well-ventilated areas.
3. Package Contents
Please check the package for the following items:
- 1 x HT-203U Mobile Phone External Infrared Thermal Imager
- 1 x Compact Storage Bag (typically included for portability)
4. Product Overview
The HT-203U is designed for portability and ease of use, featuring a compact form factor that connects directly to your smartphone's USB-C port.

Figure 4.1: HT-203U Infrared Thermal Imager
Key Features:
- USB-C Connector: Stainless steel connector for direct plug-and-play with compatible smartphones.
- Infrared Lens: High-sensitivity sensor for precise temperature detection.
- Non-slip Ribbed Edges: Ergonomic design for secure handling.
- Compact Design: Lightweight and portable for on-the-go use.

Figure 4.2: Device Connectors and Edges
Dimensions:

Figure 4.3: HT-203U Device Dimensions
- Length: Approximately 2.75 inches
- Width: Approximately 1.81 inches
- Thickness: Approximately 0.55 inches
5. Setup
The HT-203U is designed for simple, plug-and-play operation with your smartphone.
- Download the App: Before connecting the device, search for and install the official HTi thermal imaging application from your smartphone's app store (e.g., Google Play Store for Android).
- Connect the Device: Carefully insert the USB-C connector of the HT-203U into your smartphone's USB-C port. Ensure it is fully seated.
- Power Supply: The thermal imager draws power directly from your smartphone's battery (approximately 0.33W), allowing for 5-7 hours of use on a typical 3000-5000mAh device.
- Launch the App: Open the installed thermal imaging application. The app should automatically detect the connected HT-203U and display the thermal feed.

Figure 5.1: Connecting to Smartphone
6. Operating Instructions
Once connected and the app is running, you can begin using your HT-203U for thermal imaging tasks.
- View Thermal Feed: The smartphone screen will display a real-time thermal image. The HT-203U provides a 56° x 42° wide field of view.
- Identify Temperature Variations: The high-sensitivity sensor detects subtle temperature variations. Hotter areas typically appear in warmer colors (e.g., red, orange, yellow), while cooler areas appear in cooler colors (e.g., blue, purple).
- Application Scenarios:
- Building Inspection: Scan walls, windows, and ceilings to identify insulation gaps, drafts, and moisture issues.
- HVAC Repair: Detect leaks in ductwork, check for blockages, and assess the efficiency of heating and cooling systems.
- Electrical Troubleshooting: Pinpoint overheating components in circuit boards, wiring, and electrical panels to prevent failures.
- Enhanced Resolution: Leveraging TISR technology, the camera boosts resolution from 256x192 to 512x384 for clearer, more detailed visuals.
- Temperature Alarms: Utilize the app's features for high-low temperature alarms to quickly identify areas exceeding or falling below set thresholds.

Figure 6.1: Thermal Imaging on Smartphone
Extreme Temperature Operation:
The HT-203U is designed to operate normally at temperatures ranging from -20°C to 50°C, allowing for data tracking in both very cold and very hot conditions.

Figure 6.2: Operation in Extreme Temperatures
7. Maintenance
Proper care will ensure the longevity and optimal performance of your HT-203U thermal imager.
- Cleaning the Lens: Gently wipe the infrared lens with a soft, lint-free cloth. For stubborn smudges, use a lens cleaning solution specifically designed for optics. Do not use abrasive materials or harsh chemicals.
- Cleaning the Body: Wipe the device body with a soft, damp cloth. Avoid getting moisture into any openings.
- Storage: When not in use, store the HT-203U in its compact storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- Avoid Drops: While robust, avoid dropping the device, as this can damage internal components or the lens.
8. Troubleshooting
If you encounter issues with your HT-203U, try the following steps:
- Device Not Detected:
- Ensure the USB-C connector is fully and correctly inserted into your smartphone.
- Check if your smartphone supports USB OTG (On-The-Go) functionality and that it is enabled in settings if required.
- Try connecting the device to another compatible smartphone to rule out phone-specific issues.
- Restart your smartphone and try again.
- No Thermal Image Displayed:
- Ensure the official HTi thermal imaging app is installed and open.
- Check for any app updates.
- Verify that the device is properly connected and detected by the app.
- Ensure the lens is not obstructed.
- Inaccurate Readings:
- Ensure the lens is clean and free from dust or smudges.
- Be aware of environmental factors (e.g., reflective surfaces, air currents) that can affect thermal readings.
- Ensure the device is within its specified operating temperature range.
If problems persist, please contact customer support.
9. Specifications
| Feature | Specification |
|---|---|
| Product Size | 0.18 x 0.28 x 0.06 inches (approximate) |
| Temperature Measurement Range | -15°C to 550°C (5°F to 1022°F) |
| Measurement Accuracy | ±3.6°F / ±2% |
| Infrared Resolution | 256x192 (boosted to 512x384 with TISR technology) |
| Field of View (FOV) | 56° x 42° |
| Thermal Sensitivity (NETD) | <50mK |
| Refresh Rate | 25Hz |
| Power Consumption | 0.33W |
| Weight | 30g |
| Operating Temperature | -20°C to 50°C |
| Country/Region of Origin | China |
| Target Audience | Professional tools for engineering and maintenance personnel, and household tools |
10. User Tips
- For best results, ensure your smartphone's battery is adequately charged before extended use, as the imager draws power from it.
- Experiment with different color palettes within the app to find the best visualization for your specific inspection task.
- Practice scanning various objects and surfaces to become familiar with how different materials appear in thermal imaging.
11. Warranty and Support
The HT-203U Infrared Camera comes with a standard manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact the seller or manufacturer directly through their official support channels.