RONGYIN SQ-8000

Contents

SQ-8000 Walkie Talkie User Manual

Model: SQ-8000 | Brand: RONGYIN

1. Product Overview

The RONGYIN SQ-8000 is a high-power, dual-band walkie talkie designed for outdoor use, offering robust communication capabilities. It features a dual PTT design, a large color screen, and supports Type-C charging and programming.

SQ-8000 Walkie Talkie with key features
Figure 1: SQ-8000 Walkie Talkie highlighting Wireless Copy Frequency, Dual-Band, Dual PPT, 128 Channels, Type-C Charging, and 12W power.

Key Features:

  • Duplex different-band repeater function
  • Dual receiving (AB area can be received simultaneously in different bands)
  • Extra large color screen and dual display
  • Adaptable frequency ranges for various regions: 136-174MHz, 400-520MHz (RX/TX), AM 109-135MHz (aviation RX), FM 64-108MHz (RX)
  • 128 groups of memory channels
  • Strong and stable 12W output power
  • QT/DQT CTCSS encoding, decoding, and scanning
  • VOX (Voice Operated Transmit) built-in function
  • Multiple side buttons with customizable functions
  • Dual PTT design
  • Fast frequency scan
  • Day/night theme selection
  • Single-band/dual-band display
  • Wide and narrowband optional (25KHz)
  • Operation voice prompts and display interface in Chinese and English
  • Single tone pulse frequency (2100Hz/1750Hz/1000Hz/1450Hz) for repeater activation
  • Frequency reversal function
  • Companding function
  • Scrambling function

2. Package Contents

Please inspect the package carefully upon receipt. If any items are missing or damaged, contact your dealer immediately. The standard package includes:

  • 1 × Radio Body
  • 1 × Battery
  • 1 × Antenna
  • 1 × Belt Clip Hoster
  • 1 × Screwdriver
  • 1 × English Manual
  • 1 × Type-C Cable

Additional accessories may be included depending on your specific purchase.

Standard Package Contents of SQ-8000 Walkie Talkie
Figure 2: Standard package contents including radio, antenna, battery, and accessories.

3. Setup

3.1 Installing/Removing the Battery Pack

The battery pack is not fully charged from the factory. Please charge it before first use.

  1. Align the battery pack with the back of the radio.
  2. Push the battery pack and radio upward until the latch on the radio base locks.
  3. To remove, pry out the battery latch on the bottom of the radio and push the battery pack out.

3.2 Using the Smart Charger

When the battery is low, the unit will provide a "low power" voice notification and a "beep" prompt every 5 seconds.

  1. Connect the AC plug of the smart charger to a power outlet (AC: 90-240V). The indicator light will flash once, and the charger will enter the charging state.
  2. Insert the battery pack into the charger. The red light will be continuously on, indicating charging. When the green light is continuously on, charging is complete.

Note:

  • When a depleted battery pack is inserted, the smart charger pre-charges it in trickle mode. The red light will flash for 10-20 minutes before normal charging begins.
  • Trickle pre-charging protects the lithium battery.
Type-C Charging port and methods
Figure 3: Type-C Charging port and various charging methods (USB Type-C, Computer, Power Bank, Car Charging).

3.3 Type-C Programming Port

The walkie talkie features a dedicated Type-C port for programming. This port is for data transfer and programming only and does not support charging.

Type-C Programming port
Figure 4: Dedicated Type-C port for frequency programming. This port does not support charging.

4. Operating Instructions

The walkie-talkie has multiple working modes and functions accessible via the menu system. The display LCD screen is divided into two areas (A and B) showing information for two working channels. The [MAIN] symbol indicates the active channel for operations.

Dual Band frequency ranges and radio display
Figure 5: Radio display showing dual band frequencies and menu options.

4.1 Basic Operations

  • Quick Search: In menu settings, press [UP] or [DOWN] to navigate. Hold to search quickly.
  • Quick Frequency Scanning: Quickly scan frequencies.
  • Working Mode Conversion: Set the working channel to VFO frequency mode or MR channel mode using the EXIT/MR key. MR mode has four display types: Channel number, Channel frequency + number, Channel name, Channel name + frequency.
  • Dual PTT Design: The radio features two PTT buttons for flexible operation.
Dual PTT Design
Figure 6: Highlighting PTT 01 and PTT 02 buttons for dual Push-To-Talk functionality.

4.2 Menu Functions (MENU + [Number] [Function])

To access menu functions, press [MENU] followed by the corresponding number. Use [UP]/[DOWN] to select options, [MENU] to confirm, and [EXIT] to return to standby.

  1. STEP (Menu 1) - Step Frequency: Select desired step frequency.
  2. SQL (Menu 2) - Squelch Level: Adjust squelch level (0-9). Level 0 turns off squelch. Higher levels require stronger signals.
  3. SAVE (Menu 3) - Power Saving Mode: Turns off receiver circuit periodically to save battery. Select ON/OFF.
  4. TXP (Menu 4) - Power Level: Select HIGH or LOW transmit power.
  5. ROGER (Menu 5) - Transmitting Reminder Tone: Choose BOT (start), EOT (end), BOTH, or OFF.
  6. TOT (Menu 6) - Transmit Timer: Set transmission time limit (15s to 900s, 60 levels).
  7. VOX_GRD (Menu 7) - Voice Control Level: Adjust VOX sensitivity (1-9). OFF disables VOX. Higher levels require louder volume. (Cannot be enabled in scanning or radio mode).
  8. W/N (Menu 8) - Bandwidth Setting: Select WIDE (25KHz) or NARROW.
  9. VOICE (Menu 9) - Voice Switch: Turn operation voice prompts ON/OFF.
  10. V/M (Menu 10) - Working Mode: Switch between Channel Mode and Frequency Mode.
  11. CH-MDF (Menu 11) - Channel Display Mode: In channel mode, select display type (frequency + channel number, channel number, channel name, or channel name + frequency).
  12. TX-DCS (Menu 12) - Transmit DCS: Select desired Digital Coded Squelch subtone (105 positive/reverse codes, D023N-D7541). OFF disables.
  13. TX-CTC (Menu 13) - Transmitting CTCSS: Select desired Continuous Tone-Coded Squelch System subtone (50 groups, 67.0-254.1Hz). OFF disables.
  14. RX-DCS (Menu 14) - Receive DCS: Select desired Digital Coded Squelch subtone for receiving.
  15. RX-CTC (Menu 15) - Receive CTCSS: Select desired Continuous Tone-Coded Squelch System subtone for receiving.
  16. SFT-D (Menu 16) - Frequency Difference Direction: Set transmit frequency higher (+) or lower (-) than receive, or OFF.
  17. OFF-SET (Menu 17) - Frequency Difference Selection: Set frequency difference (0-599.995MHz).
  18. TAIL-SW (Menu 18) - Tail-SW: Enable/disable tail sound.
  19. DISP_SET (Menu 19) - Single Display Setting: Select single segment or dual segment display.
  20. TDR (Menu 20) - Dual Frequency Standby: Enable/disable dual frequency standby.
  21. LANGUAGE (Menu 21) - Menu Language: Select CHINESE or ENGLISH.
  22. ABR (Menu 22) - Screen Saver Time: Set backlight off time (5S-150S) or OFF (always on).
  23. BEEP (Menu 23) - Key Beep Switch: Turn key beep ON/OFF.
  24. DIS_MODE (Menu 24) - Display Mode: Select day/night theme.
  25. ABR-LV (Menu 25) - Backlight Level: Adjust backlight intensity (1-10 levels).
  26. BCL (Menu 26) - Busy Channel Lock-out: Prevent transmission on a busy channel (ON/OFF). (Disabled in cross-band relay/repeater mode).
  27. TOA (Menu 27) - Timeout Warning: Set advance warning time for transmit timer (OFF, 1S-10S).
  28. VOX-DLY (Menu 28) - VOX Delay: Set delay after VOX signal stops before transmission ends (OFF, 1S-10S).
  29. SC-REV (Menu 29) - Scanning Mode: Select scanning behavior (TO: continue scanning after 5s idle; CO: stop on carrier, resume after 3s; SE: stop on carrier).
  30. LOCKMODE (Menu 30) - Lock Mode: Select keyboard lock type (Keyboard, Keyboard+Encoder, Keyboard+Encoder+PTT).
  31. AUTOLOCK (Menu 31) - Keyboard Auto Lock: Enable/disable automatic keyboard lock after 15s of inactivity. Unlock by holding [#LOCK] for >2s.
  32. TONE (Menu 32) - Tone Setting: Select single tone pulse frequency (1000Hz, 1450Hz, 1750Hz, 2100Hz) for repeater activation. Transmit by pressing side key PF1.
  33. PF1-LONG (Menu 33) - Long Press Side Button 1: Assign function (backlight, scan, squelch, AB key, fast frequency scan, power switching, working mode, on-site alarm, remote alarm).
  34. PF2-SHORT (Menu 34) - Short Press Side Button 2: Assign function (same as PF1-LONG).
  35. PF1-LONG (Menu 35) - Long Press Side Button 2: Assign function (same as PF1-LONG).
  36. MEM-CH (Menu 36) - Memory Channel: Store current channel parameters. In VFO mode, you can set different frequency differences and directions before storing.
  37. DEL-CH (Menu 37) - Channel Delete: Delete a stored channel. (Channel 1 cannot be deleted).
  38. RPT-SW (Menu 38) - Repeater Switch: Turn repeater function ON/OFF.
  39. RPT-RCT (Menu 39) - Repeater Receipt Tone: Enable/disable repeater receipt tone.
  40. V-BAT (Menu 40) - Battery Voltage: Display current battery voltage.
  41. SCAN-ADD (Menu 41) - Scan Add: Determine if current channel participates in scan (ON/OFF). (Only in channel mode).
  42. RP-SW (Menu 42) - Scrambler Switch: Turn scrambler function ON/OFF to prevent others from hearing conversations on the same frequency.
  43. YK-SW (Menu 43) - Companding Switch: Turn companding function ON/OFF.
  44. MDC (Menu 44) - MDC: Turn MDC function ON/OFF.
  45. Freq-SCAN (Menu 45) - Quick Frequency Scanning: Scans for nearby transmitters, displays received signal frequency and signaling, with options to save or exit.
  46. VERSION (Menu 46) - Version Number: Displays current firmware version.
  47. RESET (Menu 47) - Initialization: Initialize function parameters (VFO) or all parameters including channels (ALL) to factory defaults.

4.3 Wireless Copy Frequency

The SQ-8000 features a wireless copy frequency function that automatically scans and copies other walkie-talkie frequencies and settings via radio waves, eliminating the need for manual parameter input.

Wireless Copy Frequency feature
Figure 7: Two SQ-8000 walkie-talkies demonstrating the wireless copy frequency function.

5. Maintenance

5.1 General Precautions

  • Keep the walkie-talkie and all its parts and accessories out of the reach of children.
  • Do not attempt to disassemble the walkie-talkie. Non-professional handling may cause damage.
  • Use only the battery pack and charger provided by the manufacturer.
  • Use only the antenna provided by the manufacturer to avoid shortening communication distance.
  • Do not expose the walkie-talkie to direct sunlight for prolonged periods or place it in overheated areas.
  • Do not place the walkie-talkie in dusty or humid environments.
  • Do not clean the walkie-talkie with strong chemicals, cleaning agents, or strong detergents.
  • Do not transmit when the antenna is not installed.
  • If the walkie-talkie emits odor or smoke, immediately turn off the power and contact the dealer.

6. Troubleshooting

Before assuming the walkie-talkie is faulty, refer to the table below. If the problem persists, you may try initializing the intercom to correct incorrect operation (Menu 47).

Fault Phenomenon Solution
Reception indication persists, speaker is silent
  • Confirm volume knob is adjusted to maximum.
  • Is CTCSS different from other group members? Recheck and set CTCSS.
  • Is mute mode set correctly?
Keys do not respond
  • Is the keyboard locked?
  • Are there any other keys stuck?
Cannot enter scan Check if the channel in the scan group is scanned and added.
Cross-band repeater failed Confirm if the working channel of the A/B zone is a cross-band frequency.
Repeater status cannot be forwarded Check if the mute mode and CTCSS of the receiver are correct.
In standby mode, radio automatically transmits without pressing PTT key Is the VOX function turned on and the level is set too low.
Other (non-group member) voices appear in the channel Change the frequency of the CTCSS.

7. Specifications

General:

  • Model Number: SQ-8500 (Note: Product title uses SQ-8000, model number from specs is SQ-8500. Please verify if there's a discrepancy.)
  • Use: Outdoor
  • Material: Plastic
  • Battery Capacity: 5800mAh
  • Waterproof / Water-Resistant: IP45
  • Battery Included: Yes
  • Storage Channel: 199CH
  • Frequency Range: 144-148MHz, 156-163MHz, 430-440MHz, 446MHz, 462-467MHz (from product properties). Also 136-174MHz, 400-520MHz (from description).
  • Dimensions: 144mm*66mm*44mm (Antenna not included)
  • Walkie Talkie Type: Portable
  • Display: Yes
  • Maximum Range: 10km-50km
  • Origin: Mainland China
  • Certification: CE, Dot, EAC, EPA, FCC, GMP, RoHS, TGA, UL, KC, pse, weee
  • Channel step frequency: 5KHz /6.25KHz/10KHz /12.5KHz/25KHz /50KHz /100KHz
  • Channel: 128
  • Working mode: F2D/F3E
  • Operation temperature: -20℃ to 40℃
  • Antenna impedance: 50Ω
  • Power requirement: 7.4VDC
  • Weight: 490g/1.11b

Transmitting:

  • Output Power(w): 10w-25w
  • Audio distortion: ≤5%
  • Audio power: ≤500mW

Receiving:

  • Sensitivity: UHF/VHF: 0.25μV (12dB SINAD)
  • Frequency stability: ±2.5ppm
  • Audio distortion: ≤5%
  • Output power: 12W/1W (VHF) 12W/1W (UHF)

8. User Tips

  • GPS Functionality: This radio does NOT have GPS functionality.
  • Type-C Ports: Be aware that there are two Type-C jacks. One is exclusively for charging, and the other is exclusively for programming or connecting accessories like a mic/headset. Do not attempt to charge through the programming port.
  • Battery Protection: Always allow the smart charger to complete its trickle pre-charge cycle for depleted batteries to ensure optimal lithium battery health.
  • Voice Prompts: If you wish to turn off all operation voice prompts, ensure both the VOICE (Menu 9) and BEEP (Menu 11) settings are turned off.

9. Warranty & Support

Declaration:

This manual has been compiled with the utmost care to ensure that the content is correct and complete. The company is not responsible for any omissions or errors in the text. The company reserves the right to change product design and specifications without prior notice.

FCC Warning Statement:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

SAR Statement:

This device meets the government's requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The SAR limit set by the FCC is 8W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 0mm from the body. The Face-held test distance is 25mm.

For further assistance or to view the full user manual in PDF format, please refer to the official documentation available at: SQ-8000 User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.