Introduction
The GameSir G7 Pro Wuchang: Fallen Feathers Edition is a high-performance wireless controller designed for Xbox consoles, PC, and Android devices. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your controller to ensure an optimal gaming experience.
This controller is an official collaboration with Wuchang: Fallen Feathers, featuring a unique design that embodies the game's spirit. It includes advanced features such as GameSir Mag-Res™ TMR sticks, Hall Effect analog triggers with Micro Switch trigger stops, a three-part magnetic swappable faceplate, and four remappable buttons.
Video: GameSir G7 Pro Wuchang: Fallen Feathers Edition promotional video showcasing its design and features.
Package Contents
Please check the box for the following items:
- 1* GameSir G7 Pro Wuchang Game Controller
- 1* Smart Auto Start-Stop Charging Station
- 2* Extra D-pads (one pre-installed, one extra cross-shape, one extra circular-shape)
- 1* Cable Retainer
- 1* 2.4GHz Wireless USB Receiver
- 1* Type-C Cable (3m)
- 1* User Manual

Image: All items included in the GameSir G7 Pro Wuchang: Fallen Feathers Edition package.
Setup Guide
1. Charging the Controller
The controller comes with a built-in 1200mAh lithium battery. To charge:
- Place the controller on the Smart Auto Start-Stop Charging Station. The station will automatically begin charging.
- Alternatively, connect the controller directly to a power source (e.g., Xbox console, PC, or USB wall adapter) using the provided 3m Type-C cable.
Charging Time: Approximately 2.5 hours (with 5V, 1A input).

Image: GameSir G7 Pro Wuchang controller on its Smart Auto Start-Stop Charging Station.
2. Connecting the Controller
The GameSir G7 Pro Wuchang supports three connection modes: 2.4G Wireless, Wired, and Bluetooth 5.3.

Image: Tri-mode connectivity diagram for Xbox consoles, PC, and Android devices.
2.1. 2.4G Wireless Connection (for Xbox Consoles & PC)
- Insert the 2.4GHz Wireless USB Receiver into an available USB port on your Xbox console or PC.
- Turn on the controller. It should automatically connect to the receiver.
- For Xbox consoles, the controller supports one-press wake-up.

Image: GameSir G7 Pro Wuchang controller positioned next to an Xbox Series X console, illustrating wireless connectivity.
2.2. Wired Connection (for Xbox Consoles & PC)
- Connect the Type-C end of the provided cable to the controller and the USB-A end to your Xbox console or PC.
- Ensure the detachable cable retainer is used for a stable and secure connection.
2.3. Bluetooth Connection (for Android)
- Switch the mode selector on the controller to Bluetooth mode.
- On your Android device, go to Bluetooth settings and search for available devices.
- Select "GameSir G7 Pro" to pair.
3. Swapping Faceplates and D-pads
The controller features a three-part magnetic swappable faceplate and includes two extra D-pads for customization.
- Gently pull the magnetic faceplate sections to detach them.
- Align and attach your desired faceplate sections.
- To swap D-pads, simply pull off the current D-pad and snap on the new one.
Note: G7 series faceplates are compatible with the G7 Pro, but the G7 Pro’s faceplate is not compatible with other G7 series controllers (G7, G7 SE, and G7 HE).

Image: Exploded view of the controller highlighting the optical micro switch ABXY, mechanical micro switch D-pad, and magnetic detachable faceplate.
Operating Instructions
1. GameSir Nexus App Customization
Download the GameSir Nexus app on your Xbox console or PC for full customization options. The app allows you to:
- Adjust stick curves and deadzones.
- Set gyroscope sensitivity and map it to sticks, buttons, or mouse (PC only).
- Remap the four extra buttons (R4/L4 back buttons, R5/L5 mini bumpers).
- Configure trigger settings, including Hair Trigger Mode.
- Customize vibration intensity of the four rumble motors.

Image: Screenshot of the GameSir Nexus software interface, demonstrating advanced customization options for the controller.
2. Hair Trigger Mode
Activate Hair Trigger Mode for faster response times on the Hall Effect analog triggers. Hold the M button and then press LT/RT to toggle this mode. This is ideal for competitive gaming where quick trigger presses are crucial.

Image: Comparison of Hall Effect analog triggers for smooth control and Micro Switch triggers for lightning-fast response.
3. Gyroscope Function (PC Only)
The built-in gyroscope can be mapped to the stick, buttons, or mouse for enhanced control in PC games. Configure these settings through the GameSir Nexus app.

Image: Illustration of the built-in gyroscope feature with mapping function for PC only.
4. Extra Buttons
The controller features four extra buttons: two mini bumpers (R5/L5) and two lockable back buttons (R4/L4). These can be remapped to other functions using the GameSir Nexus app to suit your playstyle.

Image: Rear view of the controller highlighting the two mini bumpers and two lockable back buttons.
5. Audio Jack and Microphone Mute
The 3.5mm audio jack supports both wired and 2.4G wireless connections, allowing you to connect your headset directly to the controller. A dedicated microphone mute button is also available for convenience.

Image: Key features including 1200mAh rechargeable battery, four rumble motors, 3.5mm audio jack, and rubberized textured grips.
Maintenance
1. Cleaning
- Use a soft, dry cloth to clean the controller's surface.
- For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution.
- Avoid using harsh chemicals or abrasive materials that could damage the controller's finish.
2. Battery Care
- Store the controller in a cool, dry place when not in use.
- Avoid exposing the controller to extreme temperatures.
- Charge the controller regularly, even if not in frequent use, to maintain battery health.
Troubleshooting
1. Connection Issues
- Wireless connection not establishing: Ensure the 2.4GHz USB receiver is securely plugged into the console/PC. Check if the controller is in the correct mode (2.4G or Bluetooth). For Bluetooth, ensure your Android device's Bluetooth is on and discoverable.
- Intermittent connection: Try moving closer to the receiver or console. Ensure there are no obstructions or strong interference sources (e.g., other wireless devices) nearby.
- Wired connection not working: Ensure the Type-C cable is fully inserted into both the controller and the console/PC. Try a different USB port or cable.
2. Button/Stick Malfunctions
- Buttons unresponsive or sticking: Clean around the buttons with a soft cloth. If using swappable D-pads, ensure they are correctly seated.
- Stick drift or inaccurate input: Use the GameSir Nexus app to calibrate the TMR joysticks.
3. Charging Problems
- Controller not charging: Ensure the charging station is powered, or the Type-C cable is connected to a working power source. Check for any debris in the charging port.
4. Controller Reset
If the controller is unresponsive or behaving erratically, perform a reset. Refer to the detailed instructions in the PDF user manual for the exact reset procedure, often involving a small reset button or a specific button combination.
Specifications
| Feature | Detail |
|---|---|
| Brand | GameSir |
| Model | G7 Pro Wuchang: Fallen Feathers Edition |
| Connection | 2.4G Wireless & Wired (Xbox, PC); Bluetooth (Android) |
| Working Platforms | Xbox Series X|S, Xbox One X|S, Steam, PC, Android |
| Six-Axis Gyroscope | Yes (for PC only) |
| Sticks | GameSir Mag-Res™ TMR joysticks |
| Trigger Button Type | Hall-Linear (Hall Effect analog triggers with Micro Switch trigger stops) |
| Rumble Motors | Yes, 4 in total (in each grip and trigger) |
| ABXY Switch Type | Optical Micro Switch |
| D-pad Switch Type | Mechanical Micro Switch |
| Extra Buttons | 4 (R4/L4 back button and R5/L5 mini bumper) |
| Back Button Latches | Yes |
| 3.5mm Audio Jack | Yes, supported via both wired & 2.4G wireless |
| Microphone Mute Button | Yes |
| Faceplate | Three-part magnetic swappable |
| Battery Capacity | Built-in 1200mAh lithium battery |
| Charging Time | 2.5h (5V, 1A) |
| Battery Life | Around 10 hours (typical gaming usage) |
| Charging Station | Included |
| Customization Software | GameSir Nexus |
| Connectivity Interface | Type-C |
| Polling Rate (PC) | 1000Hz (wired & 2.4G) |
| Package Length | 20 cm |
| Package Width | 19 cm |
| Package Height | 11 cm |
| Package Weight | 0.844 kg |

Image: Detailed comparison table outlining the features of the G7 Pro Wuchang: Fallen Feathers Edition, G7 Pro, and G7 SE controllers.
User Tips
- Seamless Wireless Experience: Users confirm the controller connects seamlessly and works reliably in wireless mode on Xbox Series X and S with no setup issues.
- Maximize Customization: Download the GameSir Nexus app for your console or PC to unlock the full potential of customization, including stick calibration, button remapping, and gyroscope settings.
- PC Gyroscope: The gyroscope function is particularly useful on PC, allowing for customizable mappings to enhance intuitive control in games.
- D-Pad for Fighting Games: While the mechanical micro switch D-pad is precise, some users note it might not be ideal for fighting games if you primarily use arrow keys for complex inputs.
- Responsive and Comfortable: Many users praise the controller for its extremely fast response time, comfortable grip, and precise analog sticks and optical buttons.
- No Built-in Speaker: Unlike some other controllers (e.g., DualSense), this controller does not have a built-in speaker.
Warranty and Support
GameSir products are designed for durability and performance. For detailed warranty information and support, please refer to the official GameSir website or the included user manual PDF.
A comprehensive user manual in PDF format is available for download. You can access it here: GameSir G7 Pro User Manual (PDF). This PDF contains additional information on specific functions, troubleshooting steps, and safety guidelines.