Introduction
This manual provides instructions for the installation, use, and maintenance of your Otilli Rear Seat Cowl, specifically designed for the 1390 Super Duke R EVO motorcycle models from 2024 to 2026. Please read this manual thoroughly before installation and use to ensure proper function and safety. This accessory is intended to convert your motorcycle from a two-seater to a single-seater configuration, enhancing its aesthetic and providing a lighter, more focused riding experience.
Video: A brief overview demonstrating the Otilli Rear Seat Cowl.
Safety & Warnings
Important Safety Information:
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries.
Product Features
The Otilli Rear Seat Cowl offers several advantages for your motorcycle:
- Lightweight Design: Significantly lighter than standard components, contributing to overall weight reduction.
- High-Quality Material: Constructed from durable ABS plastic, ensuring high-quality workmanship and longevity.
- Durability: Exhibits good corrosion resistance and high toughness, preventing deformation even after prolonged use.
- Enhanced Aesthetics: Provides a visual highlight, transforming the look of your motorcycle into a sleek, single-seater design.
- Single-Seater Conversion: Easily converts your motorcycle from a two-seater to a single-seater configuration.
- Improved Comfort: Designed to provide comfort and help absorb shocks during riding.
- Simple Installation: Features a straightforward design for easy and quick installation.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | Otilli |
| Model Name | For 1390 Super Duke R |
| Fitment | For 1390 Super Duke R 2024- |
| Material | High-quality plastic (ABS) |
| Item Type | Covers & Ornamental Mouldings |
| Condition | 100% Brand New |
| Quantity | 1 item |
| Color | Black |
| Item Weight | 0.15kg |
| Item Height | 0inch |
| Item Width | 0inch |
| Item Length | 0inch |
| Origin | Mainland China |
Package Contents
The package should contain the following items:
- 1 x Otilli Rear Seat Cowl
- (Any necessary mounting hardware, if applicable, should be included. Please check packaging.)
Dimensions of the package are approximately: Length 2cm, Width 2cm, Height 1cm. Total package weight is approximately 0.2kg.
Installation Instructions
The Otilli Rear Seat Cowl is designed for simple and easy installation. Please follow these general steps. For detailed, model-specific instructions, refer to your motorcycle's service manual or consult a professional.
- Preparation: Ensure your motorcycle is parked on a stable, level surface. Turn off the engine and remove the ignition key.
- Remove Passenger Seat: Locate the release mechanism for your motorcycle's passenger seat (usually a key lock or lever under the main seat) and carefully remove the passenger seat.
- Position the Seat Cowl: Align the Otilli Rear Seat Cowl with the mounting points where the passenger seat was previously attached.
- Secure the Cowl: Gently press down and slide the cowl into place until it clicks or locks securely. Ensure all tabs and clips are properly engaged.
- Verify Security: Once installed, gently try to lift the cowl to ensure it is firmly attached and does not wobble.
Note:
- No special tools are typically required for installation, but always refer to your motorcycle's specific instructions.
- Ensure the cowl is fully seated and locked to prevent it from detaching during operation.
Operation
Once installed, the rear seat cowl converts your motorcycle into a single-seater. This allows for a more aggressive and sporty aesthetic, and can also provide a slight aerodynamic advantage. The cowl is designed to be a permanent fixture when in use, providing a comfortable and stable riding experience for the solo rider.
Care and Maintenance
- Cleaning: Clean the seat cowl with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents that could damage the plastic finish.
- Inspection: Periodically check the cowl for any signs of damage, cracks, or loose fittings. Ensure it remains securely attached to the motorcycle.
- Storage: If removing the cowl for storage, keep it in a clean, dry place away from direct sunlight and extreme temperatures to prevent material degradation.
Troubleshooting
If you encounter any issues with your Otilli Rear Seat Cowl, please refer to the following common solutions:
- Cowl is loose: Re-check the installation steps to ensure it is properly aligned and all locking mechanisms are engaged. Ensure no debris is preventing a secure fit.
- Difficulty installing: Verify that the cowl is designed for your specific motorcycle model and year (1390 Super Duke R 2024-). Ensure no obstructions are present on the motorcycle's seat base.
- Scratches or damage: Minor scratches can sometimes be buffed out with plastic-specific polishes. For significant damage, replacement may be necessary.
If problems persist, please contact customer support for assistance.
User Tips
- Always double-check the fitment before purchasing to ensure compatibility with your specific motorcycle model and year.
- For a seamless look, ensure the cowl's color matches your motorcycle's existing paintwork or choose a contrasting color for a custom aesthetic.
- Consider applying a protective wax or sealant to the cowl periodically to maintain its finish and protect against UV damage.
Frequently Asked Questions (FAQ)
- Q: Is this seat cowl difficult to install?
- A: No, the design is simple and generally allows for easy installation without special tools. It typically involves removing the passenger seat and clicking the cowl into place.
- Q: What material is the seat cowl made from?
- A: It is made from high-quality ABS plastic, known for its durability, corrosion resistance, and toughness.
- Q: Does it fit other motorcycle models?
- A: This specific model is designed for the 1390 Super Duke R 2024-. Please verify compatibility for other models.
Manufacturer Information
Manufacturer: Foshan Xinhongmian Trading Co., Ltd.
Address: 901A1, 9th Floor, Fengxiu Building, No. 18, Fengxiu Gang Industrial Zone, Bichong, Huangqi, Dali Town, Nanhai District, Foshan City, Guangdong Province, China
Telephone: +86-13632806159
Email: 243226686@qq.com
EU Authorized Representative: VAT SPEED SL
EU Representative Address: Calle Antonio Salvador N99.1,28026 Madrid, Spain
EU Representative Telephone: +34-916321624
EU Representative Email: services@vatspeed-eu.com
For further details, you may refer to the User Manual (PDF).
Support
If you have any questions, require technical assistance, or need to report an issue, please contact the manufacturer or their authorized representative using the contact information provided above.