TKLBLS T6

Contents

TKLBLS T6 6 Channel Audio Mixer

Professional Audio Mixer with Bluetooth, USB, XLR, RCA Interface, 48V Phantom Power, and 99 DSP Effects

1. Product Overview

The TKLBLS T6 is a versatile 6-channel audio mixer designed for various applications including stage performances, KTV, and live shows. It features multiple input options, 48V phantom power, USB and Bluetooth connectivity, and a built-in 99 DSP effects processor.

TKLBLS T6 Audio Mixer Front Panel
Front panel view of the TKLBLS T6 Audio Mixer, showing all controls and input/output ports.

2. Safety Instructions

Please read and follow these safety instructions carefully to ensure safe operation and to prevent damage to the unit.

  • Water and Moisture: Do not use this appliance near water (e.g., bathtubs, washbowls, kitchen sinks, wet basements, or swimming pools).
  • Ventilation: Ensure the appliance is placed in a location that allows for proper ventilation. Do not block ventilation openings or place it on surfaces like beds, sofas, or carpets that may impede airflow.
  • Heat: Keep the appliance away from heat sources such as radiators, heat registers, stoves, or other heat-producing appliances, including amplifiers.
  • Power Source: Connect the appliance only to the power supply type described in the operating instructions or marked on the appliance.
  • Power-Cord Protection: Route power supply cords to prevent them from being walked on or pinched. Pay attention to cords, plugs, convenience receptacles, and the point where they exit the appliance.
  • Cleaning: Clean the appliance only as recommended by the manufacturer.
  • Non-use Periods: Unplug the power cord from the outlet when the appliance is left unused for a long period.
  • Object and Liquid Entry: Take care to prevent objects from falling and liquids from spilling into the enclosure through openings.

3. Setup and Connections

3.1 Mixer Panel Introduction

Mixer Panel Introduction with labeled controls
Detailed view of the mixer panel with labels for each control and port.

The mixer features a comprehensive set of controls and ports:

  • Inputs: Mono input (XLR/6.5mm combo jacks), Stereo input (6.5mm jacks), USB Audio.
  • Outputs: Main Output (XLR/6.5mm jacks), Phones (6.5mm/3.5mm jacks), REC (RCA).
  • Controls: Gain knob, Treble knob, Midrange knob, Bass knob, Reverb knob, Balance knob, Volume knob, Toggle Switch, AUX knob, Master Fader.
  • Digital Section: Display screen, Power button, MP3 player controls (PC, DOWN, UP, INPUT, HI, MI, REC, MP3).
  • Power: 5V power supply port.

3.2 Connecting Devices

Mixer Panel Introduction with connected devices
Diagram showing various devices connected to the mixer, including microphones, instruments, speakers, and computers.

The TKLBLS T6 mixer supports a wide range of audio devices:

  • Microphones: Connect wireless, corded, or condenser microphones to the CH1-CH4 mono inputs using XLR or 6.5mm jacks.
  • Instruments: Guitars and other instruments can be connected to the Hi-Z inputs.
  • Speakers/Amplifiers: Connect active speakers or power amplifiers to the Main Output (XLR or 6.5mm).
  • Headphones: Use the PHONES output for monitoring.
  • External Audio Sources: Connect flash drives for MP3 playback or a computer via USB for recording and playback.
  • Power Supply: Connect the included 5V power supply to the 5V power supply port.

3.3 Phantom Power

48V Phantom Power switches
Close-up of the 48V phantom power switches for individual channels.

The mixer provides separate 48V phantom power for condenser microphones. Each mono input channel (CH1-CH4) has an independent switch to activate +48V phantom power. Ensure phantom power is only activated when using condenser microphones that require it.

4. Operating Instructions

4.1 Channel Controls

  • GAIN Knob: Adjusts the input gain for each channel.
  • HI-Z Switch: Activates high impedance input for instruments like guitars.
  • EQ (HI, MID, LOW) Knobs: Adjust the treble, midrange, and bass frequencies for each channel.
  • EFF Knob: Controls the amount of effect sent from the DSP processor to the channel.
  • LEVEL Knob: Adjusts the overall volume level of each channel.

4.2 Main Output and Monitoring

  • MASTER Fader: Sets the overall volume level of the main mix output.
  • PHONES Knob: Controls the volume of the headphone output.
  • Level Display: The LED indicators show clipping (CLIP), signal presence (SIG), and power status (POW).
  • Lossless Monitoring Headphone Jack: Supports both 6.5mm and 3.5mm headphone outputs for flexible monitoring.
Headphone Jack Interfaces
Close-up of the 6.5mm and 3.5mm headphone interfaces.

4.3 Digital MP3 Player and Connectivity

Bluetooth and USB Playback
Illustration of wireless Bluetooth 5.0 and USB lossless playback capabilities.

The built-in digital MP3 player supports various playback modes:

  • USB Playback: Insert a USB flash drive with MP3, WMA, WAV, APE, or FLAC files for direct playback.
  • Bluetooth Connectivity: Wirelessly stream audio from your smartphone or other Bluetooth-enabled devices using Bluetooth 5.0.
  • PC Connection: Connect the mixer to a computer via USB to use it as a sound card for playing computer audio and recording. Press the 'PC' button to switch between MP3 player and PC connection mode.

MP3 Player Button Functions:

  • MODE: Short press to switch playback mode (USB/Bluetooth/PC). Long press for recording.
  • PLAY/PAUSE: Short press to play/pause. Long press to cycle conversion.
  • PREVIOUS SONG: Short press for previous track. Long press to decrease volume.
  • NEXT SONG: Short press for next track. Long press to increase volume.
Field Recording Sound Card Mixer
The mixer functioning as a sound card, supporting lossless one-line transmission from a computer.

4.4 99 DSP Digital Effects

99 DSP Digital Effects Display
The digital display showing the selected DSP effect number.

The mixer includes a 99 DSP digital effects processor. Rotate the dedicated knob to select the desired effect type, then press the knob to confirm your selection. The available effects include:

  • Reverb: HALL (1-9), CLUB (10-15), CHURCH (16-21), PLATE (22-26)
  • Delay: MONO DELAY (27-31), STEREO DELAY (32-36), ECHO (37-40)
  • Modulation: CHORUS (41-44), FLANGER (45-48), PHASER (49-52), TREMOLO (53-56), WAH WAH (57-60)
  • Distortion: DISTORTION (61-64), OVERDRIVE (65-68)
  • Dynamics: COMPRESSOR (69-72), GATE (73-76)
  • Other: PITCH SHIFT (77-80), REVERB (81-84), DELAY (85-88), CHORUS+REVERB (89-92), FLANGER+REVERB (93-96), WAH+REVERB (97-99)

4.5 Recording Output

Use the TAPE OUT (RCA) jacks to connect to a recording device, such as a tape deck, to record the mixer's output. The TAPE IN (RCA) jacks allow for connecting playback devices like CD players.

5. Maintenance

  • Cleaning: Clean the mixer with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Storage: When not in use for extended periods, unplug the power cord and store the unit in a dry, dust-free environment.
  • Handling: Avoid dropping the unit or exposing it to excessive force. Prevent liquids or foreign objects from entering the enclosure.

6. Troubleshooting

If you encounter issues with your TKLBLS T6 mixer, refer to the following guidelines. For problems not listed here or if the issue persists, contact qualified service personnel.

6.1 Common Issues and Solutions

  • No Power:
    • Ensure the 5V power adapter is correctly connected and plugged into a working outlet.
    • Check the power button on the mixer.
  • No Sound Output:
    • Verify all input and output cables are securely connected.
    • Check channel GAIN and LEVEL knobs, and the MASTER fader are not set to minimum.
    • Ensure the correct input source (USB, Bluetooth, PC) is selected on the digital MP3 player.
    • If using phantom power, ensure it's activated for condenser microphones.
  • Distorted Sound:
    • Reduce the GAIN and LEVEL settings for the input channel and the MASTER fader to prevent clipping (indicated by the CLIP LED).
    • Check microphone or instrument input levels.
  • No Bluetooth Connection:
    • Ensure the mixer is in Bluetooth mode (check the digital display).
    • Make sure Bluetooth is enabled on your transmitting device and it's within range.
    • Forget the device on your phone and try pairing again.

6.2 When to Seek Professional Service

The appliance should be serviced by qualified personnel if:

  • The power supply cord or plug is damaged.
  • Objects have fallen into, or liquid has been spilled into, the appliance.
  • The appliance has been exposed to rain or moisture.
  • The appliance does not operate normally or exhibits a marked change in performance.
  • The appliance has been dropped, or the enclosure is damaged.

Do not attempt to service the appliance beyond what is described in this manual. All other servicing should be referred to qualified service personnel.

7. Specifications

Feature Specification
Brand Name TKLBLS
Model Number T6
Type Mixers
Input Channels 4 Mono (XLR/6.5mm combo), 2 Stereo (6.5mm)
Phantom Power 48V (switchable per mono channel)
DSP Effects 99 Digital Effects
Connectivity Bluetooth 5.0, USB Audio Interface, USB MP3 Playback
Power Source DC 5V (USB 5-20V DC)
Inbox Adaptor Yes
Built-in Battery No
Package Dimensions (L x W x H) 37 cm x 8 cm x 27 cm
Package Weight 1.5 kg
Origin Mainland China

8. Warranty and Support

8.1 Warranty Information

This product is warranted against defects in material and workmanship for a period of one (1) year from the original date of purchase. This warranty does not cover defects caused by misuse, neglect, improper handling, non-compliance with technical/safety regulations, force majeure, or unauthorized repair/opening of the unit.

If the product shows defects within the warranty period not due to normal wear and tear or improper handling, the company will, at its sole discretion, either repair or replace the product.

For warranty claims, please contact your local dealer or the seller directly. Do not send the product back without prior authorization.

A detailed user manual (PDF) is available for download at TKLBLS T6 User Manual (PDF).

9. User Tips

  • Power Bank Usage: When using the mixer on the go with a power bank, ensure the power bank can provide at least 2.5A, preferably 3A, for stable operation.
  • Output Level Issues: If experiencing significant drops in output level when using an auxiliary battery, try connecting the power to a standard adapter and testing the output with an amplifier to isolate the issue.
  • Sound Quality: Users have noted high sound quality and a good range of technical features for the price.

© 2024 TKLBLS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.