XIAOMI Xiaomi 17 Ultra

Contents

Xiaomi 17 Ultra Professional Photography Kit

User Manual

1. Product Overview

The Xiaomi 17 Ultra Professional Photography Kit enhances your mobile photography experience. This manual provides detailed instructions for its installation, operation, and maintenance.

Diagram of Xiaomi 17 Ultra Photography Kit components
Figure 1: Xiaomi 17 Ultra Photography Kit Components

Components:

  • Hand Strap Eyelet: For attaching the wrist strap.
  • Video Button: To control video recording.
  • Status Indicator: Displays device status (charging, connection, battery).
  • Shutter Button: For powering on, taking photos, and controlling continuous shooting.
  • Magnetic Charging Port: For charging the grip (phone must be removed).
  • Hand Strap: For secure handling.
  • Magnetic Charging Cable: For charging the grip.

2. Setup Instructions

2.1. Installation of the Grip

  1. Align the Phone: Align the phone's button side with the corresponding button side of the grip. Gently slide the phone in, ensuring the button edge of the phone fits perfectly with the inner side of the grip.
  2. Secure the Phone: Gently press on the left side of the phone (the side opposite the buttons) to fully seat the phone into the grip.
  3. Verify Fit: Ensure that all sides fit tightly with no looseness. Installation is complete.
Diagram showing phone installation into the grip
Figure 2: Phone installation into the Photography Kit grip

2.2. Disassembly of the Grip

  1. Release Top Corners: Gently push the upper part of the phone outward from the rear lens area to separate the two top corners of the phone from the grip.
  2. Slide Out Phone: Continue to slide the upper half of the phone out of the grip to separate the grip from the phone.
  3. Complete Removal: Pull the phone out completely to finish removal.
Diagram showing phone removal from the grip
Figure 3: Phone removal from the Photography Kit grip

3. Operating Instructions

3.1. Power On

Press and hold the Shutter Button to power on the grip. The status indicator will light up.

3.2. Pairing & Connection

  • First-time Pairing Process: After properly attaching the grip to the phone, press and hold the Shutter Button to power it on. A pop-up will appear on the phone prompting for connection. Select 'Connect' to start pairing. A Bluetooth connection successful pop-up will appear upon completion.
  • Reconnecting with a Paired Device: Press and hold the Shutter Button to wake up the grip. It will automatically reconnect via Bluetooth, and a connection success notification will appear on Xiaomi HyperIsland. If it does not reconnect automatically, go to Settings > Bluetooth and check the 'Available devices' list to select the device manually.

3.3. Power Management

  • Charging Function: The charging port is located on the inner side of the grip. Before charging, please remove the phone from the grip.
  • Power Indicator: A widget can be added to the Home screen (select Battery > Add to Home screen) to show the current battery level of the grip.
  • Auto Power Off: If the grip remains inactive for 4 hours, it will automatically disconnect Bluetooth and power off. To turn it back on, press and hold the Shutter Button.

3.4. Firmware Update

Once paired with the grip, go to Settings > Camera grip > Update firmware to check for new firmware versions. If an update is available, tap to start the upgrade.

3.5. Camera Features (Shutter Button)

  • Not entering the Camera App:
    • Press and hold: Launch camera / Launch camera and take photo. Configurable in Settings > Camera Grip > Quick Launch.
  • Entering the Camera App (Take a photo/video page):
    • Half-Press: Lock the current focus area.
    • One click: Take a photo (start/end recording for video mode).
    • Press and hold: Continuous shooting (disabled by default). Enable in Camera settings > Camera grip > Shutter button > Burst.
  • Entering the Camera App (Album):
    • Half-Press: Return to the Photo/Video screen of the camera.

3.6. Camera Features (Video Button)

  • Entering the Camera App (Take a photo/video page):
    • One click: Start/end recording for video. Customizable for focal length switching or aspect ratio in Camera settings > Camera grip > Video button.

4. Status Indicators

The grip's status indicator provides visual feedback on its current state:

Status Indicator Guide
Scenario Indicator State Meaning
Grip Charging Solid red In charging
Solid green Fully charged
Bluetooth Not Connected / Pairing / Connecting / Disconnecting Red light flashing Bluetooth not connected / Bluetooth state changing (pairing/connecting/disconnecting), and the grip is charging or has low battery (<20%)
Green light flashing Bluetooth not connected / Bluetooth state changing (pairing/connecting/disconnecting), and the grip has sufficient battery (≥ 20%)
After Bluetooth Connection / After Entering Camera App Solid red Connected or in use, and the grip is either charging or has low battery (<20%)
Solid green Connected or in use, and the grip has sufficient power (≥20%)

Note: The indicator will turn off after 30 seconds of no operation.

5. Precautions & Important Safety Information

Before using and operating this device, please read and follow the following precautions to ensure that the device performs optimally and is used correctly and safely.

  • The wireless charging function is not available for your phone after the installation of the camera grip. Please remove the grip when you need to charge your phone wirelessly.
  • The Xiaomi 17 Ultra Photography Kit can only be used with the Xiaomi 17 Ultra. For future compatible models, please refer to the official product website for updates.
  • All functions of the Xiaomi 17 Ultra Photography Kit are only effective within the Xiaomi Camera APP, and cannot be used with third-party camera APPs.
  • The Xiaomi 17 Ultra Photography Kit has an OTA upgrade function. No notice will be given for new or changed functions added or changed by OTA, but the changes will be updated to the latest version of the manual.
  • Use the device within the temperature range of 0℃-35℃, and store the device within the temperature range of -20℃-45℃. Malfunction of the device may be caused when the ambient temperature is too high or too low.
  • Avoid interference from radio waves; always keep the device at least 15 centimeters away from implanted medical devices (e.g., pacemakers, cochlear implants, hearing aids, etc.) when in use, and consult the manufacturer for restrictions on this device.
  • This device and its accessories may contain small parts. Keep the device and its accessories out of the reach of children to prevent children from choking and other risks caused by swallowing of small parts.
  • Do not disassemble or alter the battery, insert foreign objects, or immerse it in water or other liquids, as this may cause battery leakage, overheating, fire or explosion.
  • Do not drop, hit, crush or puncture the battery. Avoid exposing the battery to large external pressures that can cause internal short circuits and overheating. Do not continue to use the battery if it appears to be severely inflated.
  • Do not place the device and the battery close to open flames and heating devices where high temperatures may be generated, e.g. candle, stove fire, sunlight, microwave, warmer, oven, etc.
  • Do not expose the device and accessories to rain or moisture, which may cause danger of fire or electric shock.
  • Do not try to repair the device yourself. If any part of the device does not work properly, consult Xiaomi after-sales service in time, or bring your device to Xiaomi official after-sales service outlets for inspection and repair.
  • Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device.
  • Use accessories approved by the manufacturer and compatible with this device model. Use of other types of accessories may violate the warranty terms of this device and may cause safety incidents.
  • This product contains a non-removable built-in battery; it is strictly prohibited to disassemble this product yourself. Do not attempt to replace the battery yourself to avoid battery breakage or other dangers.

6. Specifications

Attribute Value
Battery Capacity 270mAh (typ) / 262mAh (min)
Model 25127PS03S
Brand XIAOMI
Compatible Model Xiaomi 17 Ultra
Input 5V#280mA
Connection Bluetooth® wireless technology
Product Name Smartphone Camera Grip
Battery Type Lithium Ion Polymer Battery
Origin Mainland China

7. User Tips

No specific user tips were provided from reviews or Q&A content. However, based on common usage, consider the following:

  • Always ensure the grip is securely attached to your phone before use to prevent accidental drops.
  • Keep the grip charged to ensure uninterrupted use of its camera features and Bluetooth connectivity.
  • Familiarize yourself with the customizable shutter and video button functions in the Xiaomi Camera App settings to optimize your photography workflow.

8. Troubleshooting

Most common issues are related to connection or power. Refer to the 'Status Indicators' section for diagnosing problems based on the light patterns. If the device does not reconnect automatically, manually connect via Bluetooth settings.

  • Connection Issues: If the grip does not automatically reconnect, go to your phone's Bluetooth settings and manually select the device from the 'Available devices' list.
  • Power Issues: Ensure the grip is charged. If the power indicator shows red or is flashing red, charge the device. Remember to remove the phone from the grip before charging.
  • Camera App Compatibility: The kit's functions are only guaranteed within the official Xiaomi Camera APP. Third-party camera applications may not be fully supported.

9. Regulatory Information

9.1. EU Regulations - Declaration of Conformity

Xiaomi Communications Co., Ltd. hereby declares that this device with Bluetooth 25127PS03S is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity is available at www.mi.com/en/certification.

CE Mark
CE Mark indicating compliance with EU directives

9.2. RF Exposure Information

This equipment complies with radiation exposure limits and has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).

9.3. Frequency Bands and Power

This device offers the following frequency bands in EU and UK areas only and maximum radio-frequency power:

  • Bluetooth: 10 dBm

This device may be operated in all member states of the EU and UK. Observe national and local regulations where the device is used.

Restrictions in the 2.4 GHz band: Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.

9.4. WEEE (Waste Electrical and Electronic Equipment)

Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU. To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly.

10. Warranty Information

As a Xiaomi consumer, you benefit under certain conditions from additional warranties. Xiaomi offers specific consumer warranty benefits which are in addition to, and not instead of, any legal warranties provided by your national consumer law. The duration and conditions related to the legal warranties are provided by respective local laws. For more information about the consumer warranty benefits, please refer to Xiaomi's official website: www.mi.com/global/support/warranty.

Except as prohibited by laws or otherwise promised by Xiaomi, after-sales services shall be limited to the country or region of the original purchase. Under the consumer warranty, to the fullest extent permitted by law, Xiaomi will, at its discretion, repair, replace or refund your product. Normal wear and tear, force majeure, abuse or damage caused by the user's negligence or fault are not warranted.

The present warranties do not apply in Hong Kong and Taiwan. Products which were not duly imported and/or were not duly manufactured by Xiaomi and/or were not duly acquired from Xiaomi or a Xiaomi's official seller are not covered by the present warranties.

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer Postal Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

Contact: contact@support.mi.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.