Introduction
Welcome to your new CHAOYIDIAN Solar Flame Light! This product is designed for outdoor use, providing ambient lighting with a realistic flame effect. It requires no wiring, incurs zero electricity cost, and is energy-saving and easy to install. Suitable for various outdoor scenes such as courtyards, balconies, and corridors. Please read this manual carefully to ensure correct usage and to extend the product's service life.
Product Components
The package includes the following components:
- Solar light main body × 1
- Solar panel × 1 (integrated or separate, depending on model)
- Installation accessory kit × 1 (includes extension pole and ground stake)
Specifications
| Feature | Detail |
|---|---|
| Model Number | 96LED |
| Installation Method | Assembly |
| Batteries Included | Yes |
| Bulbs Included | Yes |
| Dimmable | No |
| Protection Level | IP55 |
| Certification | EMC, FCC, ROHS |
| Origin | Mainland China |
| High-concerned chemical | None |
| Charging Time (Normal Sunlight) | 4-6 hours |
| Battery Life (Constant Light Mode) | 8-12 hours |
| Rainy Day Usage | 3-7 days (continuous) |
| Approximate Dimensions (Assembled) | 12cm (width) x 79cm (height) |
| Product Lifespan | Lamp body: 3-5 years, Solar panel: 5-8 years, Battery: 2-3 years (varies by environment) |
Quick Installation
Follow these steps for a quick and easy setup:
- Position Selection: Install the solar panel in an unobstructed area with sufficient sunlight. For optimal charging, the solar panel should preferably face south. Align the light towards the area you wish to illuminate.
- Fixing: Use the provided supporting accessories (extension pole and ground stake) to firmly fix the light. If your model has a separate solar panel and light unit, connect the wires according to the "positive to positive, negative to negative" principle and ensure proper waterproof treatment for the connections.
- Debugging: Turn on the power switch. Cover the solar panel with an opaque object (e.g., your hand). If the light turns on normally, the installation is correct. Remove the cover, and the light will automatically enter the charging state.
Operating Instructions
- Intelligent Mode: The light operates in a default light control mode, automatically turning on at dusk and turning off at dawn. Some models may also support timing control and human body induction functions, providing high brightness when people approach and low brightness when they leave.
- Charging and Battery Life: The light can be fully charged within 4-6 hours under normal sunlight. In constant light mode, the battery life is typically 8-12 hours. It can operate continuously for 3-7 days even on rainy days, depending on the charge received.
- New Light Activation: Before the first use, charge the light in direct sunlight for 24 hours to activate the battery. There is no need to deliberately discharge the battery during daily use.
Maintenance and Care
- Wiring: It is strictly forbidden to reverse the positive and negative poles of the wires. Ensure the wire interface is waterproof to prevent short circuits and product damage.
- Cleaning: Regularly wipe the surface of the solar panel with a soft cloth to remove dust and debris. Do not use a high-pressure water gun for cleaning.
- Product Integrity: Do not disassemble or modify the product without permission. Avoid placing the product in environments with high-temperature exposure or extreme cold.
- Storage: If the product will not be used for a long period, fully charge it before storing. Recharge the battery every 3 months to prevent damage due to undercharge.
Troubleshooting
| Fault | Solution |
|---|---|
| Light not turning on |
|
| Short lighting time |
|
| Insufficient brightness |
|
User Tips
- Easy Setup: The solar flame light is designed for wireless operation and requires no complex wiring. It is ready to use after a simple assembly.
- Optimal Charging: For best performance, ensure the solar panel is placed in an unobstructed, sunny location, ideally facing south, to maximize charging efficiency.
- Battery Replacement: The battery in the solar flame light is replaceable, which can extend the overall product life. Contact the seller for compatible replacement batteries.
- Water Resistance: The product has an IP55 protection level, making it suitable for rain, dew, and light snow. For long-term durability, install it in a high, non-waterlogged spot.
Warranty and Support
For any issues, questions, or concerns regarding your CHAOYIDIAN Solar Flame Light, please contact the seller directly through your purchase platform. They will be able to provide assistance and support for product-related inquiries.
For further details and documents, you may refer to the official user manual PDF: View User Manual (PDF)