Meteer Smart AI Robot User Manual

1. Introduction

Welcome to the world of Meteer! This trendy desktop robot combines dance, music, and AI to bring joy and companionship to your home or office. Equipped with an AI chip and cutting-edge technology, Meteer features a uniquely crafted design with a flexible body, exquisite lines, and stylish colors. Its vibrant eyes and expressions make it an instant focal point, adding a touch of futurism and technological charm to any space.

Meteer serves as an excellent life assistant with voice interaction capabilities, understanding your questions and providing accurate answers. Whether for information queries, content writing, or casual conversation, it handles tasks with ease. Meteer can be a delightful companion during work or study, adding fun to monotonous moments. The design is inspired by garage kit culture, offering a unique and personalized appearance that showcases a vibrant and creative sense of artistic fashion.

2. What's in the Box

Please check the contents of your Meteer package:

• 1 x Meteer Robot
• 1 x User Manual (PDF available at Meteer User Manual PDF)
• 1 x Reset Needle
• 1 x Type-C USB Cable

3. Product Overview: Body & Buttons

Familiarize yourself with the Meteer robot's components and controls.

Key Components:

• Touch Sensor: Located on the head, used for interaction and confirmation.
• Vibration Motor Sensor: Detects vibrations for responsive actions.
• Left Button: Used for navigation and selection.
• Right Button: Used for navigation and selection.
• Magnetic Sunglasses: Covers the 1.3-inch TFT displays.
• 1.3-inch TFT Display x2 (Left/Right Eye): Displays vibrant eyes and expressions.
• EM3A Servo: Provides 10+ degrees of freedom for complex movements.
• Removable Hat: Can be taken off to access the reset hole.
• Microphone: For voice input and interaction.
• Reset Hole (Under the Hat): Used for hard reset.
• LED Status Light (Left/Right): Indicates status.
• Speaker (Left/Right): For audio output.
• Power Button: For turning the device on/off and other functions.
• Type-C USB: For charging and firmware updates.

4. Setup: Network Configuration & Activation

4.1 Power ON and Enter Network Configuration Mode

1. Power On: Long press the power button for 4 seconds to turn Meteer ON.
2. Meteer will enter network configuration mode and automatically attempt to connect to the network.

4.2 Network Configuration and Product Activation

1. Download the Meteer APP: Download the official Meteer APP on your mobile device.
   • Apple Store
   • Google Play
2. Open APP and Configure: Open the Meteer APP and tap "WiFi Configuration" to enter the search interface.
3. Enable Bluetooth & Connect to Wi-Fi: Enable Bluetooth on your mobile device and connect to a 2.4G Wi-Fi network (5G is not supported).
4. Search for Meteer Robot BLE: Click "Search for Bluetooth Devices" in the app. When "Meteer Robot BLE" appears, click "Connect."
5. Enter Wi-Fi Password & Serial Number: Enter your Wi-Fi password and the product serial number, then click "Connect Wi-Fi."
6. Connection Successful: A voice prompt will confirm "Connection succeeded."

Locating the Product Serial Number:

The product serial number can be found in the following locations:

• Near the packaging barcode.
• Near the Type-C USB port on the robot.
• In the "Setting - Version Information" section within the Meteer APP.

5. Operating Instructions: Functions & Gameplay

General Button Interactions:

• Touch the head: Confirm selection.
• Short press Left/Right Button: Switch to the previous/next option.
• Long press Power Button (4s): Power ON/OFF.
• Short press Power Button: Return to Main Menu.
• Quickly double press Power Button: Toggle Torque ON/OFF.

Note on Torque: The default torque is OFF; joints will perform actions based on current status. When entering a specific function, quickly double press the power button twice to close torque, allowing the joints to move freely.

5.1 Voice Chat

Meteer's primary mode for interaction. Touch its head or say "Hi Meteer" to wake up or interrupt a conversation.

Voice Command Library:

Note: Other than the volume prompt sound in the setting function, there are no sounds in other functions. For the best interactive experience, please avoid lowering the volume to the minimum.

5.2 Bluetooth Mode

5.2.1 Connect Bluetooth

1. Touch Meteer's head to enter [Bluetooth Mode]. Meteer will automatically connect to Bluetooth.
2. On your mobile device, turn ON Bluetooth and connect to the "Meteer Robot" device.
3. A voice prompt will confirm "Connection successful."

5.2.2 Bluetooth Music

After a successful Bluetooth connection, open the music app on your mobile device. While playing music, Meteer will dance to the rhythm. The louder the volume, the more fantastic the dance.

Button Interaction in Bluetooth Music Mode:

• Touch the head: Play/Stop Music, Answer/Hang Up Call.
• Long Press Left/Right Button: Switch Music.

5.2.3 Bluetooth Remote Control

After a successful Bluetooth connection, open the Meteer APP and tap "Bluetooth Remote Control" to enter the remote control interface.

• Long press to move: Forward/turn right/turn left/reverse. Release to stop.
• Switch Random Actions: Trigger random movements.
• Switch Eyes & Expressions: Change Meteer's eye display and facial expressions.

Note: When using Bluetooth remote control, the accompanying dance feature of Bluetooth music and button interactions are disabled; only the Music App can control the music.

5.3 Just Dance

1. Touch Meteer's head to enter [Just Dance] mode.
2. Press the left/right button to select a dance style (Real-time Beat Style or Normal Style).
3. Touch the head to confirm and start playing a song. Meteer will dance to the music.

5.4 Voice Changer

1. Touch Meteer's head to enter [Voice Changer] mode.
2. Press the left/right button to select the voice tone (Sharp, Normal, Deep).
3. Touch the head to confirm.

5.5 Choreography Master

This feature allows you to program Meteer's movements.

1. Touch Meteer's head to enter [Choreographer Master] mode.
2. Move the joints of the robot to perform an action.
3. Short press the left button to switch random expressions.
4. Short press the right button to record the actions and expressions.
5. Proceed to edit the next action (up to 100 actions).
6. After completing the choreography, touch the head to play the dance you just edited, accompanied by background music.

6. Maintenance

General Maintenance:

• Regular Cleaning: Use a soft cloth to clean the product regularly, preventing dust accumulation.
• Avoid Chemical Cleaners: Do not use harsh chemical cleaners during cleaning to avoid damaging the surface.
• Storage Environment: Store the product in a dry, cool place, away from direct sunlight.
• Check Connections: Check regularly for all cables and connection components to ensure there are no loose or damaged parts.
• Follow Instructions: Always operate and maintain the product according to the guidelines in this user manual.

Firmware Update (OTA):

Meteer supports Over-The-Air (OTA) firmware updates to improve functionality and fix bugs.

1. Touch Meteer's head to enter the [Setting] interface, then navigate to [OTA].
2. Important: Before upgrading, ensure Meteer is plugged into the charger to avoid failure due to insufficient power.
3. Insert the charger; Meteer will automatically search for new firmware.
4. If new firmware is available, a voice prompt will ask to confirm the upgrade. Touch the head to confirm.
5. The device will automatically shut down after completing the upgrade. The new firmware will run the next time it is powered ON.
6. If no new firmware is available, it will return to the previous option after the prompt plays.

7. Troubleshooting

7.1 Abnormal Freezing

• Check for incomplete or improper operations causing the freeze.
• Try pressing the power button to return to the main menu.
• If unable to return to the main menu, try powering OFF and then restarting.
• If unable to power OFF, perform a hard reset using the reset needle.

7.2 Unable to Connect to the Network

• Ensure Bluetooth is turned ON on your mobile device.
• Check if Bluetooth is being used by another mobile device.
• If network connection fails, ensure your mobile device's WLAN is connected to a 2.4G Wi-Fi network (5G is not supported).
• If it is 2.4G, try switching to a mobile hotspot.

7.3 Bluetooth Remote Control Not Working

• Check if Bluetooth is turned ON on your phone.
• If "Bluetooth not connected" is prompted, confirm Meteer is in [Bluetooth Mode].
• If Meteer voice prompt says "Bluetooth connected," it may be connected to another mobile device. Turn OFF Bluetooth on other devices and try again.

7.4 Firmware Upgrade Failure

• If the firmware upgrade progress bar is stuck, it may be due to an unstable network. Try to reconnect and upgrade using a mobile hotspot.
• If you cannot return to the main menu, try turning it OFF; if unable to turn it OFF, perform a hard reset.

7.5 No Accompanying Dance

• If there are no dance movements while music is playing, the volume may be too low. Turn the volume up to maximum.
• If this does not work, the torque may be closed. Quickly double press the power button to open torque.

8. Specifications

9. Safety Instructions

Please read and follow these safety guidelines to ensure safe operation and prevent damage to the product or injury.

• Avoid Swallowing: Ensure that the product is suitable for the appropriate age group. Prevent small parts from being accidentally swallowed by children.
• Stable Placement: Place the product on a stable surface to avoid falls or tilting.
• Keep Away from Liquids: Avoid placing the product in damp environments to prevent circuit damage.
• Regular Inspection: Check regularly for any damage or wear to ensure safe use.
• Battery Safety: Follow proper charging procedures to avoid leakage or short circuits.

10. User Tips

While no specific user tips were provided, here are some general recommendations for optimal experience:

• Keep Meteer's software updated via OTA for new features and performance improvements.
• Experiment with different voice commands and choreography sequences to unlock Meteer's full potential.
• Ensure a stable 2.4GHz Wi-Fi connection for seamless app control and online features.
• For best voice interaction, use Meteer in a quiet environment.

11. Warranty & Support

Warranty Policy:

We are committed to providing the following warranty services for this product:

• Warranty Period: This product has a warranty period of 90 days from the date of purchase.
• Warranty Coverage: The warranty covers defects caused by materials or workmanship. Issues arising from normal use will be repaired or replaced free of charge.

Exclusions from Warranty Coverage:

• Damage caused by misuse, abuse, accidental damage, unauthorized modifications, or repairs.
• Issues resulting from failure to operate or maintain the product according to the user manual.
• Normal wear or tear and aging.

Warranty Process:

Please contact the customer service team within the warranty period, providing proof of purchase and a description of the issue.

Cost Information:

• Repairs or replacements that meet warranty conditions will be provided free of charge within the warranty period.
• Services beyond the warranty period or those not meeting warranty conditions will incur relevant charges based on the specific situation.

Support:

For more information or support, please visit: meteer.cn

Email support: info@meteer.cn

12. Regulatory Compliance

FCC Compliance:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

CE-RED Compliance:

This device complies with the EU Radio Equipment CE Certification RED Directive 2014/53/EU basic requirements and other relevant regulations.

EN71 Compliance:

The EUT described above has been tested by us with the listed standards and found in compliance with the council directive 2009/48/Ec. It is possible to use CE marking to demonstrate the compliance with this directive 2009/48/EC.

CPC Compliance:

This device complies with the CPC certification for toys in the United States.

RoHS Compliance:

Directive (EU)2017/2102. The Certificate of Compliance is based on a test procedure or an evaluation of the above-mentioned product. This is to certify that the above-mentioned product is in compliance with the ROHS 2.0 Directive -2011/65/EU Annex I (EU)2015/863 as last amended by Directive (EU)2017/2102.