UYJY 50UF HD Video Wireless Extender

Contents

UYJY 50M Wireless HDMI Extender User Manual

Model: 50UF HD Video Wireless Extender

1. Introduction

The UYJY 50M Wireless HDMI Extender allows you to wirelessly transmit 1080P Full HD video and audio signals up to 50 meters in open environments. This plug-and-play device eliminates the need for long HDMI cables, offering a flexible solution for screen mirroring or extending your display to a TV, projector, or monitor. It operates on a 5.8G frequency band for smooth, low-latency transmission, making it ideal for home entertainment, presentations, and digital signage.

2. Safety Information

General Safety Advisory: This product may involve inherent risks. Always assume potential hazards are present until proper safety verification is completed.

Essential Precautions:

  • Assess the Environment: Look for and identify potential dangers such as electrical sources or trip hazards before proceeding.
  • Use Personal Protective Equipment (PPE): Wear appropriate PPE (e.g., safety glasses, gloves) as required for the specific task or environment.
  • Follow Procedures: Never bypass safety protocols. Use equipment only for its intended purpose.
  • Stay Alert: Do not operate machinery or perform hazardous tasks if you are fatigued, distracted, or under the influence of medication or substances that impair judgment.

Immediate Action Required:

  • STOP if you are uncertain about the safety of any action.
  • CONSULT the relevant official safety manuals or qualified personnel for guidance.
  • DO NOT PROCEED without proper authorization and training for hazardous tasks.

Your safety and the safety of others is paramount. Neglecting warnings can lead to severe injury or fatal accidents.

This product conforms with all applicable European Union regulations, indicated by the CE symbol. The "Conformité Européenne" (CE) marking confirms that the product meets essential requirements for health, safety, environmental protection, and consumer protection as laid down in EU directives.

3. Package Contents

Please check the box for the following items:

  • Transmitter (TX) - 1 unit
  • Receiver (RX) - 1 unit
  • USB to Type-C power cables - 2 units
  • Quick Start Guide - 1 unit

4. Product Overview

The UYJY Wireless HDMI Extender consists of a Transmitter (TX) and a Receiver (RX) unit. Both units are compact and feature a sleek design.

Transmitter and Receiver Units

Image: UYJY Wireless HDMI Extender Transmitter (TX) and Receiver (RX) units.

Interface Diagram:

Each unit features the following:

  1. HDMI input/HDMI output: For connecting to source devices (TX) or display devices (RX).
  2. Pairing key: Button used for initiating the pairing process between TX and RX units.
  3. Working status indicator light: Provides visual feedback on the device's status (e.g., flashing for pairing, steady for connected).
  4. Power input (Type-C): USB Type-C port for power supply.
Wireless HDMI Extender with 5.8Ghz chip

Image: Transmitter (TX) and Receiver (RX) units, highlighting 5.8G frequency band high-speed chip.

5. Setup Instructions

The device supports both one-to-one and one-to-many connection modes. No driver installation is required for automatic connection.

5.1. Installation Connection

One-to-one connection mode (1 transmitter to 1 receiver):

Connect the Transmitter (TX) to your source device (e.g., laptop, PC) and the Receiver (RX) to your display device (e.g., TV, projector).

Laptop connected to TV wirelessly

Image: Laptop connected to a TV via the wireless extender, demonstrating plug-and-play functionality.

One-to-many connection mode (1 transmitter to 2 receivers):

Connect one Transmitter (TX) to your source device and two Receivers (RX) to two separate display devices.

Laptop projecting to a projector wirelessly

Image: Laptop wirelessly mirroring its screen to a projector, suitable for presentations.

5.2. Connection Instructions

  1. Connect one end of the USB power cable to the Transmitter's (TX) Type-C power supply port, and the other end to a USB port on your signal source (e.g., PC, laptop) for power.
  2. Connect one end of the USB power cable to the Receiver's (RX) Type-C power supply port, and the other end to a USB port on your display device (e.g., TV, projector) for power.
  3. Plug the HDMI port of the Transmitter (TX) into the HDMI output port of your signal source.
  4. Plug the HDMI port of the Receiver (RX) into the HDMI input port of your display device.
  5. After the display device is properly connected, wait for 30 to 40 seconds for the image to appear. The indicator lights on both the receiver and transmitter will flash rapidly during this initial connection phase.

6. Operating Instructions

6.1. Pairing Method

I. One-to-One Pairing Method:

  1. Long press the pairing button of the Transmitter (TX) without releasing it, then connect its power supply. When the green indicator light flashes rapidly, the transmitter enters pairing mode. Release the pairing key.
  2. Long press the pairing button of the Receiver (RX) without releasing it, then connect its power supply. When the green indicator light flashes rapidly, the receiver enters pairing mode. Release the pairing key.
  3. Wait for a few seconds. When the receiver's indicator light changes from flashing rapidly to a steady light, the pairing is successful.
  4. After pairing is complete, both the transmitter and receiver must be powered off and then powered back on to establish the connection.

II. One-to-Many Pairing Method:

  1. Use the one-to-one pairing method to pair the first transmitter with the first receiver.
  2. Pair the first transmitter with the second receiver using the same method.
  3. After all necessary receivers are paired with the same transmitter, both the transmitter and all receivers need to be powered off and reconnected to power.

6.2. Display Modes (Copy/Expand)

The extender supports both Copy and Expand display modes, allowing you to optimize your screen usage for different tasks.

Copy and Expand Display Modes

Image: Diagram illustrating Copy Mode (displaying the same screen for efficiency) and Expand Mode (displaying different screens for balancing office and entertainment).

  • Copy Mode: Displays the same content on both your source device and the external display. This is efficient for presentations or sharing content.
  • Expand Mode: Extends your desktop across multiple screens, allowing you to display different content on each. This is useful for multitasking, balancing office work and entertainment.

7. Maintenance

To ensure the longevity and optimal performance of your Wireless HDMI Extender, follow these simple maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the exterior of the transmitter and receiver units. Avoid using liquid cleaners or abrasive materials.
  • Storage: When not in use for extended periods, store the devices in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Handle the units with care. Avoid dropping them or subjecting them to strong impacts.
  • Cable Management: Ensure that the USB power cables and HDMI cables are not bent sharply or tangled, which can cause damage over time.

8. Troubleshooting (Precautions and FAQs)

8.1. General Precautions

  • Always connect the Transmitter/Receiver to the TYPE-C power supply first, then connect the HDMI interface.
  • If using a conversion cable for HDMI input/output, ensure its maximum length is less than 1.5 meters.

8.2. When to use a power adapter (instead of USB from device)

  • If the receiver is connected to the display device and no signal appears, after confirming the selected HDMI channel of the display device is working correctly, switch to using a mobile phone charger (5V/2A recommended) to power the receiver.
  • If the connection interface displays "Connecting..." on the TV or projector for a long time.
  • If the transmitter and receiver are successfully connected but no image is displayed.

8.3. When to re-pair the devices

  • If, within a close distance of 1 meter, no image is displayed on the TV or projector.
  • If, within a close distance of 1 meter, the connection interface displays "Connecting..." on the TV or projector for a long time.
  • If the indicator light of the transmitter keeps flashing slowly.

8.4. When to shorten the distance between TX and RX

  • If the connection interface displays "Connecting..." on the TV or projector for a long time.
  • If there is no image output, or the display image on the TV or projector is not smooth, and the sound is lagging.

8.5. How to handle image but no sound

If you have an image but no sound, follow these steps on your computer:

  1. Click the "small speaker" icon in the lower right corner of the computer.
  2. Right-click the "small speaker" icon and select "Open Sound Settings".
  3. Navigate to the "Sound Control Panel" option.
  4. Change the 1080@60 option to the default setting.
  5. If there is still no sound, restart the computer.

9. User Tips

  • For optimal performance, ensure a clear line of sight between the transmitter and receiver, minimizing obstructions like walls or large furniture.
  • If experiencing interference, try to move other 5.8GHz wireless devices away from the extender units.
  • Always use the provided USB Type-C power cables or equivalent quality cables to ensure stable power delivery.
  • When using the extender for gaming or fast-paced video, ensure your source device and display are set to 1080P@60Hz for the best experience.

10. Specifications

Parameter Explanation
Product Name Wireless HDMI projector (Extender)
WiFi frequency band 5GHz
Resolution 1080P@60Hz
Transmission distance 50m in open environment (MAX)
Shell material ABS
Power supply interface USB C
Power supply current 5V-2A
Product dimensions 79x29x11mm
Wireless Standard 802.11a/n
Operating Frequency 2.4GHZ/5.8GHZ Dual Band
Video Coding H264
Transmit Power 13dbm
Supported Resolutions 640*480, 720*480, 800*600, 1280*720, 1280*768, 1280*800, 1280*960, 1280*1024, 1440*900, 1560*768, 1366*768, 1600*900, 1680*1050, 1920*1080
1 Transmitter to 1 Receiver Support
1 Transmitter to Multiple Receivers Supports max up to 1 transmitter and 2 receivers
Wireless Transmission Distance 60 meters for open space outdoors, 50 meters indoors without walls
Transmitter Interface 1 HDMI1.4, 1 TYPE-C
Receiver Interface 1 HDMI1.4, 1 TYPE-C
Power Supply DC 5V/1A
Power Consumption (Receiver) Maximum 1.4W
Power Consumption (Transmitter) Maximum 1.7W
Operating Temperature -5°C ~ 70°C
Operating Humidity 5% ~ 90%

11. Warranty and Support

For any product inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact information.

An official user manual in PDF format is also available for download: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.