diymore SVP-688W-B

Contents

Adjustable Voltage Protector SVP-688W-B User Manual

Model: SVP-688W-B

Brand: diymore

1. Product Overview

The diymore SVP-688W-B is an advanced Smart WiFi Adjustable Voltage Protector designed for home electrical systems. It offers comprehensive protection against various electrical anomalies, including overvoltage, undervoltage, overcurrent, and leakage current. With its integrated WiFi capabilities, the device allows for remote monitoring and control via a mobile application, providing enhanced safety and convenience.

Key features include high control accuracy, a compact structure, strong anti-interference ability, and a long service life. It also features a memory function to retain kilowatt-hour, overvoltage, voltage, and overcurrent data. The device supports automatic reconnection after a fault is cleared and offers bidirectional metering.

2. Safety Information

  • Installation should only be performed by a qualified electrician to ensure safety and compliance with local electrical codes.
  • Ensure the main power supply is disconnected before installation or maintenance.
  • Do not operate the device if it appears damaged or malfunctioning.
  • This device is designed for AC 220V systems. Verify your system voltage before installation.
  • The EU LVD Voltage rating is below 50Vac or 75Vdc.

3. Installation and Setup

3.1 Physical Installation

The SVP-688W-B is a DIN rail mountable device. Ensure adequate space in your electrical panel for proper ventilation and access.

Front view of the SVP-688W-B voltage protector with dimensions: 36mm width, 85mm height.

Figure 1: Front view of the voltage protector with dimensions (36mm width, 85mm height).

Angled view of the SVP-688W-B voltage protector with dimensions: 65mm depth, 45mm height.

Figure 2: Angled view of the voltage protector with dimensions (65mm depth, 45mm height).

3.2 Wiring Diagram

Connect the voltage protector in series with your main power switch and air circuit breaker as shown in the diagram below. Ensure correct polarity (Line 'L' and Neutral 'N') for both input (IN) and output (OUT) terminals.

Wiring diagram showing the connection of a power switch, the SVP-688W-B voltage protector, and an air circuit breaker. The Line (L) and Neutral (N) connections are clearly marked for input and output.

Figure 3: Wiring diagram for the SVP-688W-B. Connect the Power Switch to the 'IN' terminals of the Voltage Protector, and the 'OUT' terminals of the Voltage Protector to the Air Circuit Breaker.

3.3 App Connection

The device works with the Tuya app or Smart Life app for remote control and monitoring. Download the appropriate app from your smartphone's app store and follow the in-app instructions to connect your device to your home WiFi network.

Image showing the SVP-688W-B device display with current readings and a smartphone screen demonstrating the Tuya/Smart Life app interface for remote control and energy monitoring.

Figure 4: Device display and mobile app interface for remote control and monitoring.

4. Operating Instructions

4.1 Display and Buttons

The device features a digital display showing real-time voltage (V), current (A), kilowatt-hours (KW/h), and leakage current (mA). Control buttons include 'SET', 'UP' arrow, 'DOWN' arrow, 'WIFI' indicator, 'PULSE' indicator, 'LEAKAGE' indicator, and a power button.

Clear front view of the SVP-688W-B voltage protector display, showing voltage, current, and energy readings, along with control buttons and indicators.

Figure 5: Front view of the voltage protector display and controls.

4.2 Setting Protection Parameters

Overvoltage, undervoltage, overcurrent, and leakage current protection thresholds can be configured through the connected mobile application (Tuya or Smart Life). Refer to the app's interface for detailed instructions on adjusting these settings.

  • Undervoltage Protection: Adjustable range 80~210V.
  • Overvoltage Protection: Adjustable range 120~300V.
  • Overcurrent Protection: Adjustable range 1~63A.
  • Leakage Protection: Adjustable range 10~99mA.

4.3 Timing Functions

The device supports four timing modes, configurable via the mobile application:

  • Timing Mode: Schedule on/off times.
  • Countdown Mode: Set a countdown for the device to turn on or off.
  • Cycle Timing: Repeat on/off cycles.
  • Jog Switch: Momentary on/off control.

Up to 30 sets of timing settings can be configured.

4.4 Automatic Reconnection

After a protection event (e.g., overvoltage, undervoltage, overcurrent, or leakage), the device will automatically attempt to reconnect the power supply after a set reconnect time. The reconnect time is adjustable from 10 to 99 seconds.

5. Maintenance

The SVP-688W-B is designed for low maintenance. However, regular checks can help ensure its longevity and proper function:

  • Visual Inspection: Periodically check the device for any signs of physical damage, discoloration, or loose connections.
  • Cleaning: Use a dry, soft cloth to clean the exterior of the device. Do not use liquid cleaners or solvents.
  • Firmware Updates: Check the mobile application for any available firmware updates for the device to ensure optimal performance and security.
  • Professional Inspection: It is recommended to have your electrical system, including protective devices, inspected by a qualified electrician periodically.

6. Troubleshooting

  • Device not powering on: Check the main power switch and the air circuit breaker. Ensure all wiring connections are secure.
  • Device tripping frequently: Review the protection settings (overvoltage, undervoltage, overcurrent, leakage) in the mobile app. These might be set too sensitively for your electrical load. Consult an electrician if the issue persists.
  • No WiFi connection: Ensure your home WiFi network is active and the device is within range. Follow the app's instructions for re-pairing the device.
  • Automatic reconnection not working: Verify the reconnect time setting in the app. If the fault condition persists, the device will not reconnect until the fault is cleared.
  • Inaccurate readings: Ensure the device is correctly wired according to the diagram. If readings appear consistently incorrect, contact support.

7. Specifications

Parameter Value
Rated Voltage AC 220V
Rated Current 63A
Undervoltage Protection Range 80~210V
Overvoltage Protection Range 120~300V
Overcurrent Protection Range 1~63A
Leakage Protection Range 10~99mA
Reconnect Time 10~99 seconds
Over-temperature Protection 10~85 ℃
Power Display Range 0-99999.9kWh
Product Size (L*W*H) 85 * 35 * 66mm (approx. 3.35 * 1.38 * 2.60 inches)
EU LVD Voltage Below 50Vac or 75Vdc
Type Conventional Circuit Breaker
Is Smart Device No (refers to built-in AI, but supports smart app control)
Origin Mainland China

8. User Tips

  • For optimal performance, ensure your WiFi signal is strong where the device is installed.
  • Regularly check the energy consumption data through the app to monitor your household's power usage.
  • If you experience frequent tripping, try slightly adjusting the protection thresholds in the app, but always within safe limits and consult an expert if unsure.

9. Warranty and Support

For detailed warranty information and technical support, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download:

Download User Manual (PDF)

For further assistance, please contact the seller or manufacturer's customer service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.