TDD LSW-BM

Contents

TDD Galaxy Pro II LED Steering Wheel User Manual

Model: LSW-BM

1. Introduction

Thank you for choosing the TDD Galaxy Pro II LED Steering Wheel. This advanced steering wheel features an integrated LED display, providing real-time vehicle data and an enhanced driving experience. This manual provides essential information for safe installation, operation, and maintenance of your new steering wheel.

2. Safety & Warnings

Read all instructions before use to ensure safety and prevent damage. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.

Important Safety Notice for Installation:

  • Installation requires removal of the steering wheel airbag.
  • Professional installation is strongly recommended.
  • Incorrect installation may trigger airbag warning lights or system faults.
  • Disconnect the vehicle battery before installation (wait at least 10 minutes).

3. Package Contents

Please ensure all components are present before beginning installation:

  • TDD Galaxy Pro II LED Steering Wheel
  • OBD Reading Box Smart ONE
  • OBD Harness to OBD II
  • Power Boost Cable
  • Necessary wiring harnesses and connectors

4. Setup & Installation

Professional installation is highly recommended due to the complexity and safety implications involving the vehicle's airbag system.

General Preparation:

  1. Disconnect the vehicle battery and wait at least 10 minutes before proceeding.
  2. Ensure the vehicle is parked on a level surface with the parking brake engaged.

OBD Reading Box Connection:

The TDD OBD Reading Box Smart ONE connects to your vehicle's OBD II port to transmit data to the steering wheel.

  1. Connect Connector B from the OBD Reading Box to Socket Port A.
  2. Connect Connector C (OBD Harness) to your car's OBD II port.
  3. Connector D on the OBD Harness is used as a pass-through for the OBD II socket.
  4. The Power Boost Cable is a backup power cable for specific installation methods.

Steering Wheel Wiring Methods:

Choose the appropriate method based on your vehicle's existing wiring.

Method 1: For Steering Wheels with Existing 12V and Ground Cables (Mainly EU and USA Car Models)

This method utilizes existing 12V and Ground connections from the clock spring's upper plug.

  • Connect the IN B+ (Red) cable from the steering wheel to the 12V (A) cable from the clock spring.
  • Connect the GND (Black) cable from the steering wheel to the Ground (B) cable from the clock spring.
  • The OUT B+ (Blue) cable is not needed for this method; it serves as a backup.

Method 2: For Steering Wheels without 12V Power Cable (Mainly Japanese and Some Older Car Models)

This method routes power through the horn cable on the clock spring.

  • Connect the steering wheel's power input to the horn cable on the down side of the clock spring.
  • Connect the steering wheel's ground to the vehicle's ground.
  • The OBD Box harness power boost cable connects to the clock spring's power input.

Method 3: Build 12V and Ground Cable (Mainly Japanese and Ford Cars)

This method involves creating new power and ground connections within the clock spring.

  • Identify empty holes (A, B, C, D) on the upper and lower clock spring sockets.
  • Insert cables to build power from A to C, and ground from B to D.
  • Connect the steering wheel's IN B+ to the newly built 12V (A) cable.
  • Connect the steering wheel's GND to the newly built Ground (B) cable.

Wiring Adjustments (for specific car models):

Some car models (e.g., Mustang, Dodge, Jeep, Lincoln) may require additional wiring adjustments if the OBD box does not start automatically or does not enter sleep mode.

Step 1: Cut the Wire

Locate the specific wire that needs to be cut (refer to the provided diagram in the original manual for exact position). This wire is typically related to the ignition signal.

Step 2: Connect the Wire

Connect the cable (labeled 'A' in the diagram) to a power cable that provides power ONLY when the car is in the start status. This prevents battery drain when the car is off. The OBD Box will then turn on/off with the car's ignition.

Matching with LED Steering Wheel:

After installation, you need to match the OBD Box with the LED Steering Wheel.

  • When the steering wheel screen is in matching mode (and within the time frame), hold down both buttons on the steering wheel to turn on the screen.
  • Simultaneously hold-press button 'A' on the OBD Reading Box until matching is complete.

5. Operating Instructions

Your TDD Galaxy Pro II LED Steering Wheel provides a dynamic and informative driving experience through its integrated display and smartphone app.

LED Display Features:

The steering wheel features a 23x38mm big color screen with real-time data display and dynamic icons.

LED Steering Wheel Display Functions

Image: Display showing various functions like RPM, Temperature, Oil Status, Battery, Speed, Racing Mode, Engine, Engine Oil, and Settings.

More than 14 functions are available to help you drive better:

  • RPM: Engine Revolutions Per Minute. RPM setting from 1K to 9.9K can trigger all lights flashing.
  • Speed: Current vehicle speed.
  • Temperature: Engine temperature.
  • Oil Status: Engine oil level/pressure.
  • Battery: Vehicle battery voltage.
  • Racing Mode: Specialized display for performance driving.
  • Engine: Various engine parameters.
  • Engine Oil: Detailed engine oil information.
  • Settings: Access to steering wheel display settings.

User Interface Themes:

The Galaxy Pro II delivers 8 new system versions and 8 distinct UI experiences to match different driving styles and preferences.

8 UI Themes for LED Steering Wheel

Image: Visual representation of the 8 distinct UI themes available for the LED display.

Smartphone App Control (iOS/Android):

The dedicated app allows for advanced control and data visualization.

Smartphone App Control for LED Steering Wheel

Image: Screenshots of the iOS/Android app showing data display, paddle shifter flexible setup, and LED color settings.

  • OBD Data Display: View real-time and instant data from your car directly on your smartphone.
  • Paddle Shifter Setup: Customize blinking RPM and light-up RPM for your paddle shifters.
  • Color Setting: Adjust the LED display colors to your preference.
  • Driving Data Record: Track and review your driving performance data.

Turn Signal LED Display:

Video: Demonstration of the LED display showing left turn, right turn, and hazard warning signals integrated into the steering wheel's LED bar.

The steering wheel's LED bar can display turn signals and hazard warnings, providing visual cues directly in your line of sight.

6. Maintenance & Storage

  • Store the Galaxy Pro steering wheel display in a dry, well-ventilated environment.
  • Avoid direct sunlight, high humidity, or extreme temperatures to prevent internal electronic damage or screen aging.
  • For daily cleaning, use a soft microfiber cloth lightly dampened with a small amount of alcohol to gently wipe the screen and housing. Do not spray alcohol directly onto the unit.
  • Do not rinse with water or expose the unit to moisture. Avoid liquid intrusion into connectors, wiring ports, or internal components to prevent short circuits or malfunction.

7. Troubleshooting

  • Airbag Warning Lights / System Faults: If these occur after installation, it indicates incorrect installation. Professional re-installation or inspection is required.
  • OBD Box Not Starting Automatically: If the OBD box does not power on with the car, refer to the

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.