TOLACN Solar Outdoor Garland Rope String Lights

Contents

TOLACN Solar Outdoor Garland Rope String Lights User Manual

Model: Solar Outdoor Garland Rope String Lights

1. Introduction

Thank you for choosing the TOLACN Solar Outdoor Garland Rope String Lights. These versatile and waterproof LED lights are perfect for enhancing your outdoor spaces, whether for wedding decorations, Christmas festivities, holiday parties, or general garden ambiance. Powered by solar energy, they offer an eco-friendly and convenient lighting solution with multiple lighting modes to suit any occasion.

Warm white solar rope lights wrapped around a railing at night.
Warm white solar rope lights illuminating a railing.

2. Safety Information

  • Ensure the solar panel is installed in a location that receives direct sunlight for optimal charging.
  • Do not attempt to open or modify the solar panel or light string, as this may damage the product and void the warranty.
  • Keep the product away from open flames or extreme heat sources.
  • This product is designed for outdoor use and is waterproof, but avoid submerging the solar panel in water.
  • Keep out of reach of small children.

3. Package Contents

  • 1 x Solar LED Rope String Lights (selected length/LED count)
  • 1 x Solar Panel with Ground Stake and Spike
  • 1 x Remote Control (CR2025 battery not included)

4. Specifications

FeatureDetail
Product NameUSB Curtain Lights (Solar Outdoor Garland Rope String Lights)
Brand NameTOLACN
Power SourceSolar Cell
Voltage5V (Nominal Voltage: 1.2V)
Batteries IncludedYes (for main unit)
Remote Control8 Modes (requires 1x CR2025 battery, not included)
Luminous Flux<60
Installation MethodAssembly
CertificationCE
Available Lengths/LEDs5M 50LEDs, 10M 100LEDs, 20M 200LEDs
Emitting ColorsWarm Light, White Light, Multicolor Light, Blue Light, Purple, Green

5. Setup Instructions

5.1 Solar Panel Assembly

  1. Assemble the spike: Connect the two parts of the ground spike together.
  2. Assemble the stake: Attach the assembled spike to the solar panel unit.
  3. Remove the protected film: Peel off the protective film from the solar panel surface.
Diagram showing three steps to assemble the solar panel: 1. Assemble the spike, 2. Assemble the stake, 3. Remove the protected film. Also shows the panel can rotate 90 degrees.
Solar Panel Assembly Steps and 90-degree rotation capability.

5.2 Initial Charging & Placement

Before the first use, it is crucial to charge the solar panel sufficiently:

  • Expose the solar panel to direct sunlight for at least 12 hours (daytime) to ensure enough power storage in the battery.
  • Do not place the solar panel in a shaded area or hide it from direct sunlight during charging.
  • The solar panel can be rotated 90 degrees to optimize sun exposure.
Diagram illustrating correct and incorrect placement for solar panel charging. Correct: direct sunlight. Incorrect: shaded by house or tree. Shows charge time 8-12 hours, working time 6-10 hours.
Important notice for initial charging and solar panel placement.

5.3 Remote Control Battery Installation

The remote control is shipped without a battery. You will need to purchase one CR2025 battery and install it for the remote control to function correctly.

6. Operating Instructions

6.1 Power On/Off

Locate the ON/OFF button on the back of the solar panel unit. Press it to turn the lights on or off. The lights will automatically turn on at dusk and off at dawn once activated.

6.2 Changing Lighting Modes

The lights feature 8 different lighting modes. You can cycle through these modes using either the 'MODE' button on the solar panel unit or the remote control.

Diagram showing the solar panel unit with ON/OFF and MODE buttons, and a list of 8 lighting modes: Combination, In Waves, Sequential, Flicker, Show flash, Fast Flash, Dream change, Bright and extinguished.
Solar panel controls and available lighting modes.

The 8 modes include:

  1. Combination
  2. In Waves
  3. Sequential
  4. Flicker
  5. Show Flash
  6. Fast Flash
  7. Dream Change
  8. Bright and Extinguished
Demonstration of the rope lights in various colors and settings, highlighting their flexibility and different lighting modes.

7. Maintenance

  • Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures efficient charging.
  • Inspect the rope light string periodically for any signs of wear or damage.
  • During prolonged periods of non-use, store the lights in a cool, dry place.
  • Ensure the solar panel is not covered by snow or leaves during winter months for continuous operation.

8. Troubleshooting

  • Lights not turning on at night:
    - Ensure the solar panel is placed in direct sunlight for at least 8-12 hours during the day.
    - Check if the ON/OFF switch on the solar panel is in the 'ON' position.
    - The solar panel's sensor might be detecting ambient light; ensure it's in a dark environment at night.
  • Lights not staying on for long:
    - The battery may not be fully charged. Ensure the solar panel receives adequate direct sunlight.
    - The battery might be old and require replacement (if user-replaceable).
  • Remote control not working:
    - Check if the CR2025 battery is correctly installed and not depleted. Replace if necessary.
    - Ensure there are no obstructions between the remote and the solar panel unit.

9. User Tips

  • For best results, position the solar panel facing south (in the Northern Hemisphere) or north (in the Southern Hemisphere) to maximize sun exposure throughout the day.
  • Consider using multiple strings for larger areas or more dramatic lighting effects.
  • The flexible rope design allows for creative installation around trees, railings, fences, and other garden features.
  • Clean the solar panel regularly, especially after dusty weather or during seasons with heavy pollen, to maintain charging efficiency.
Collage of solar rope lights used in various outdoor settings: wrapped around a tree in a courtyard, along steps, on a balcony railing, and on a garden guardrail.
Creative uses for the solar rope lights in different outdoor scenes.

10. Warranty & Support

For any questions, concerns, or support needs regarding your TOLACN Solar Outdoor Garland Rope String Lights, please contact the seller or manufacturer directly. Keep your purchase receipt for warranty claims.

You can also refer to the official user manual PDF for more detailed information: View User Manual (PDF)

© 2024 TOLACN. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.