Tuya Zigbee Button

Contents

Tuya ZigBee Smart Knob Switch User Manual

Wireless Scene Button Rotatable Dimmer Controller

1. Introduction

The Tuya ZigBee Smart Knob Switch is a versatile wireless controller designed to enhance your smart home experience. It functions as a scene button and a rotatable dimmer, allowing you to control various smart devices and lighting. This device requires a Tuya ZigBee gateway for intelligent linkage and normal operation; it cannot be used standalone.

Smart Knob Scene Switch Dimmer showing compatibility and functions

Figure 1: Smart Knob Switch overview, compatible with Tuya Smart App, Smart Life App, Amazon Alexa, and Google Assistant. It supports Single Press, Double Press, Long Press, Rotate, and Press and Rotate actions for control.

Compatibility: Works with Tuya Smart App, Smart Life App, Amazon Alexa, and Google Assistant.

Important Note: Intelligent linkage to Tuya smart devices is for normal use only. This device cannot be used alone without a smart device and requires a Tuya ZigBee gateway.

Diagram showing the Smart Knob connecting to a Tuya Zigbee Hub

Figure 2: Connection diagram illustrating the Smart Knob Scene Switch connecting to a Tuya Zigbee Hub, which then communicates with a router and a smartphone app.

2. Safety Information

This device operates at low voltage (below 50Vac or 75Vdc) and is certified with CE and RoHS standards. Ensure proper handling and installation to avoid any risks. If you are unsure about any part of the installation or operation, consult a qualified professional.

3. Specifications

Product Parameter table and dimensions

Figure 3: Product dimensions and technical parameters.

Product Parameters
Parameter Value
Wireless Protocol Zigbee 3.0 (requires Zigbee gateway)
Battery Type CR2450 (3V)
Standby Current ≤8uA
Working Temperature -10°C ~ 55°C
Working Humidity 0 ~ 99%RH
Product Size Φ5*2.54cm / Φ2*1in
EU LVD Voltage Low voltage: Below 50Vac or 75Vdc
Certification CE, RoHS

Note: Zigbee2MQTT is not supported.

Smart Knob Dimmer with a note about Zigbee2MQTT support

Figure 4: The Smart Knob Dimmer, explicitly stating that Zigbee2MQTT is not supported.

4. Setup

4.1. Prerequisites

  • A Tuya ZigBee Gateway (Hub) is required.
  • Tuya Smart App or Smart Life App installed on your smartphone.
  • Ensure your smartphone's Bluetooth and Wi-Fi functions are enabled during pairing.

4.2. Device Pairing

  1. Ensure the Smart Knob Switch has a working CR2450 battery installed.
  2. Open the Tuya Smart App or Smart Life App on your smartphone. Register or log in to your account.
  3. In the app, tap the "+" icon (usually in the top right corner) to add a new device.
  4. Follow the on-screen instructions in the app to search for and add the Smart Knob Switch. The app will guide you through the process of connecting to your Zigbee gateway.
  5. Once successfully paired, the device will appear in your app, and you can proceed to configure its functions.

4.3. Resetting the Device

If you need to reset the Smart Knob Switch, follow these steps:

  1. Locate the reset key on the device.
  2. Long press the reset button for approximately 8 seconds.
  3. The device should reset. If the light does not blink, the product may not be reset.

Caution: When attempting to reset, be careful not to accidentally press the main dimmer button instead of the small reset pin, as this will prevent the device from resetting.

Diagram showing the reset key location and warning against incorrect button press

Figure 5: Illustration of the reset key location and a warning to avoid pressing the main dimmer button by mistake during the reset process.

5. Operating Modes and Functions

The Smart Knob Switch supports two primary operation modes: Scene Mode (factory default) and Remote Control Mode. You can switch between these modes.

5.1. Mode Switching

To change the operating mode between Button Mode (Scene Mode) and Dimming Mode (Remote Control Mode), perform three quick presses on the knob button.

Diagram showing how to switch between Button Mode and Dimming Mode

Figure 6: Visual guide on how to switch between 'Button Mode' and 'Dimming Mode' by performing three quick presses on the knob.

5.2. Operation Instructions by Mode

Table of Two Mode Operation Instructions

Figure 7: Detailed table outlining the actions and their corresponding functions in both Scene Mode and Remote Control Mode.

Two Mode Operation Instructions
Action Scene Mode (Factory Default) Remote Control Mode
Single Click Setting in APP ON/OFF Trigger
Double Click Setting in APP OFF
Long Press >2s Setting in APP Set Color
Rotate to Left Setting in APP Dimming down of Lights
Rotate to Right Setting in APP Dimming up of Lights

5.3. Detailed Features and Usage

  • Wireless Control of ZigBee Dimming Lamp: Add the intelligent knob switch to your Tuya intelligent ZigBee gateway. Then, add an intelligent ZigBee light bulb under the remote dimming interface in the App to wirelessly control your lamp. (Note: Only ZigBee lamps can be added for control).
    Visual example of dimming control using the knob and app

    Figure 8: Example of dimming control from 100% to 20% using the knob and the corresponding app interface.

  • Two-in-one Device for Wireless Scene: In Scene Mode, the button supports single-click and double-click actions to trigger pre-configured scenes. You don't need to open the app to activate scenes; simply click the ZigBee smart remote control.
    Image showing how to trigger smart scenes in Tuya Smart App

    Figure 9: Demonstrating how to trigger routines by creating smart scenes in the Tuya Smart App using the knob switch.

  • Home Mode (Single Click): A single press of the knob button can be configured to turn on all your lights, air conditioners, fans, and other electronic devices, setting your home to a desired 'Home Mode'.
    Image demonstrating Single Click for Home Mode

    Figure 10: A single click on the knob can activate 'Home Mode', turning on various smart devices.

  • Away Mode (Double Click): A double press of the knob button can be configured to turn off all your lights, air conditioners, fans, and other electronic devices before you leave for work or go out, setting your home to an 'Away Mode'.
    Image demonstrating Double Click for Away Mode

    Figure 11: A double click on the knob can activate 'Away Mode', turning off various smart devices.

  • Group-Control Function: Realize multi Zigbee light/bulb and multi smart device group and synchronize control function. This allows for unified control of multiple devices simultaneously.
    Image illustrating Group-Control Function

    Figure 12: Illustration of the Group-Control Function, enabling synchronized control of multiple Zigbee lights and smart devices within a smart home setup.

  • Dimming, Color Temperature, and Color Adjustment: In Remote Control Mode, you can perform various actions:
    • Single press: ON/OFF the bulb.
    • Rotate: Normal dimming (left for down, right for up).
    • Press and Rotate: Set the color temperature.
    • Long press (>3 seconds): Set the color.
    Image showing knob functionality for dimming, color temperature, and color adjustment

    Figure 13: The knob's versatile functionality for adjusting brightness, color temperature, and color of compatible smart lights.

    Another image showing knob functionality for dimming, color temperature, and color adjustment

    Figure 14: A different visual representation of the knob's controls for dimming, color temperature, and color settings.

5.4. Smart Home Integration Example

The Smart Knob can be integrated into a comprehensive smart home system to control various devices as shown in the diagram below.

Wiring diagram for setting up a smart home with the Smart Knob

Figure 15: A conceptual wiring diagram illustrating how the Smart Knob can control various smart home devices like traditional bulbs, smart plugs, smart dimmer switches, smart bulbs, fans, and smart curtains.

6. Maintenance

  • Keep the device clean and dry.
  • Avoid exposing the device to extreme temperatures or humidity.
  • Replace the CR2450 battery when the device's performance degrades or it stops responding.
  • Do not attempt to disassemble or repair the device yourself. Contact support if issues arise.

7. Troubleshooting

  • Device not responding: Check the battery. Ensure the device is within range of the Zigbee gateway. Verify the gateway is powered on and connected to the network.
  • Unable to pair: Ensure the device is in pairing mode (refer to section 4.2). Confirm your Zigbee gateway is functioning correctly. Make sure Bluetooth and Wi-Fi are enabled on your phone.
  • Reset issues: Refer to section 4.3 for correct resetting procedure, ensuring you press the correct pin.
  • App control issues: Ensure your smartphone has an active internet connection and the Tuya Smart/Smart Life app is up to date.

8. User Tips

No specific user tips are available from provided reviews or Q&A content.

9. Warranty and Support

This product is certified with CE and RoHS, indicating compliance with European safety, health, and environmental protection standards. For detailed warranty information or technical support, please refer to the official documentation provided by the manufacturer or contact your retailer.

A user manual in PDF format is available for further reference: View User Manual (PDF). Please note that the linked PDF may contain information for a different product (WiFi switch) and should be used for general guidance only, prioritizing the instructions provided in this document for the Zigbee Knob Switch.

© 2023 Tuya Smart. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.