Introduction
The EJEAS V4 Plus and V6 Pro+ are advanced motorcycle helmet intercom systems designed for clear and reliable communication between riders. Featuring Bluetooth 5.1 technology, CVC noise reduction, and IP65 waterproofing, these devices offer a seamless communication experience for groups of up to 4 riders (V4 Plus) or 6 riders (V6 Pro+). This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and enjoyment of your intercom system.
Safety Information
- Charging Precautions: To ensure long-term durability and optimal performance, use a DC5V/1A adapter for charging. The output power of the charger must not exceed 5W. Do not use fast chargers, as this can affect the service life of the intercom. (Plug not included).
- Battery Storage: When storing the machine for an extended period, ensure it is fully charged or at least 50% charged. Prolonged undercharging will adversely affect the battery life and shorten its normal service life.
Package Contents
The package includes the following items:
- 1 x V4 Plus Intercom Main Unit
- 2 x V6 Pro Intercom Main Unit
- 3 x USB Charging Cable (Do not use charger exceeding 5V 1A!)
- 3 x Allen Wrench
- 3 x Universal Helmet Clamp
- 3 x Wired Boom Microphone
- 2 x Screw Drivers
- 6 x Foam Speaker Covers
- 3 x User Manual
Product Overview
V4 Plus Unit Diagram & Buttons
V6 Pro+ Unit Diagram & Buttons
Key Features
- Bluetooth 5.1 Technology: Ensures stable communication and low energy consumption.
- CVC Noise Reduction: Intelligent noise reduction for clear audio by automatically recognizing and filtering environmental noise.
- IP65 Waterproof: Designed to withstand various weather conditions. (Ensure headphone interface is fully inserted).
- High Fidelity Speaker: Delivers 3D sound for clear conversations and music.
- FM Radio Function: Built-in FM radio with a range of 76MHz ~ 108MHz.
- Voice Assistant Support: Connects to your mobile phone's voice assistant.
Installation
Mounting the Intercom Unit
The intercom unit can be mounted to your helmet using one of two clip methods:
Clip 1 Installation Steps (Adhesive Mount):
- Clean the helmet surface where the clip will be attached.
- Peel off the protective film from the adhesive pad on the clip.
- Firmly press the clip onto the desired location on the helmet.
- Slide the intercom unit onto the mounted clip until it clicks into place.
Clip 2 Installation Steps (Clamp Mount):
- Loosen the screws on the clamp.
- Slide the clamp between the helmet shell and the inner padding.
- Tighten the screws to secure the clamp.
- Slide the intercom unit onto the mounted clamp until it clicks into place.
Installing the Headset and Microphone
- Plug the headset cable into the Type-C charging port/Headphone jack on the intercom unit.
- Route the cable neatly under the helmet padding.
- Attach the speakers to the inside of the helmet, aligning them with your ears. Use the provided foam covers.
- Position the boom microphone in front of your mouth, ensuring it is close enough for clear audio but not obstructing your vision.
Basic Operation
Power On/Off
- V4 Plus:
- Power On: Long press the <Phone Button>.
- Power Off: Click <FM Button> + <Phone Button>.
- V6 Pro+:
- Power On: Long press the <Moto Button>.
- Power Off: Click the <Power Off Button>.
Volume Control
- V4 Plus: Click <Volume+> to increase volume, Click <Volume-> to decrease volume.
- V6 Pro+: Click <Volume+> to increase volume, Click <Volume-> to decrease volume.
Mobile Phone Pairing
After pairing with your phone, you can use the intercom as a headset for calls, music, and navigation.
- Connection: Long press the <Phone Button> on either V4 Plus or V6 Pro+.
- Answer Call: Automatically answers within 8 seconds or click <Phone Button>.
- Reject Call: Long press <Phone Button>.
- Hang Up Call: Click <Phone Button>.
- End Code Replay: Double-click <Phone Button> (V4 Plus) / Long press <Phone Button> (V6 Pro+).
- Cancellation of Replay: Click <Phone Button> (V6 Pro+).
- Redial Last Number: Double-click <Phone Button> (V4 Plus).
Music Playback
- Play/Pause: Click <Phone Button>.
- Previous/Next Song: Long press <Volume-> for previous, Long press <Volume+> for next.
Voice Assistant
- Activate: Long press <Phone Button>.
FM Radio
- Turn On/Off: Long press <FM Button> (V4 Plus) / Click <FM Button> (V4 Plus EUC) / No operation (V6 Pro+ EUC).
- Switch Channel: Long press <Volume+> / <Volume-> (V4 Plus).
Intercom Operation
V4 Plus Intercom Pairing (Up to 4 Riders)
- Pairing 2 Machines: Long press A for No.1 machine, long press B for No.2 machine.
- Pairing 3 Machines: After pairing 2 machines, long press A for No.2 machine, long press B for No.3 machine, and finally click A for No.1 machine.
- Pairing 4 Machines: After pairing 3 machines, long press A on machine 3, long press B on machine 4, and finally click A on machine 1. Long press the B button of No.4 machine, after successful pairing, click the A button of No.1 machine and No.2 machine respectively.
V6 Pro+ Intercom Pairing (Multi-way, up to 6 Riders)
Two riders can talk at the same time. One main device can pair with 5 sub-devices, and the main device can choose one to talk from A/B/C/D/E sub-devices.
- Pair A: Long press main device <Moto Button> + A device <Moto Button>.
- Pair B: Long press main device <B Button> + B device <Moto Button>.
- Pair C: Long press main device <C Button> + C device <Moto Button>.
- Pair D: Long press main device <D Button> + D device <Moto Button>.
- Pair E: Long press the main device <E Button> + E device <Moto Button>.
- Switching Intercom: Press the letter button of the corresponding device.
- Bluetooth Pairing (Other Brands): Long press <Moto Button> + <Volume->, then click <Moto Button> Search.
Intercom Disconnect/Reconnect
- V4 Plus:
- Disconnect: Long press the corresponding A/B button.
- Reconnect: Click the corresponding A/B button.
- V6 Pro+:
- Disconnect: Long press A/B/C button (EUC).
Clear Pairing
- V4 Plus: Press and hold <Phone Button> + <Volume+> + <Volume-> at the same time.
- V6 Pro+: Press and hold <Phone Button> + <B Button> at the same time.
Optional EUC Remote Control Pairing
The EUC remote control (optional accessory) can be paired with your intercom unit for convenient operation.
V4 Plus EUC Pairing
- Clear Pairing Record: Long press <FM Button> + <Volume-> on the EUC.
- Pairing EUC: Long press <Phone Button> + <B Button> on the V4 Plus unit, then click any key on the EUC.
- EUC Button Functions:
- Volume+: Click to control volume, long press for next song.
- Volume-: Click to control volume, long press for previous song.
- Phone Button: Click to answer/hang up call, music pause/playback, connect back to last connected mobile phone. Long press for voice assistant/cancel dialing, double-click for redial last digit.
- A Button: Click for intercom A pairing, long press to disconnect intercom.
- B Button: Click for intercom B pairing, long press to disconnect intercom.
- Key Button: No operation.
- FM Button: Click to turn on or off FM.
V6 Pro+ EUC Pairing
- Clear Pairing Record: Long press <FM button> + <volume -> on the EUC.
- Pairing EUC: Long press <phone key> + <E key> on the V6 Pro+ unit, then click any key on the EUC.
- EUC Button Functions:
- Volume+: Click to control volume, long press for next song.
- Volume-: Click to control volume, long press for previous song.
- Phone Button: Click to answer/hang up call, music pause/playback, connect back to last connected mobile phone. Long press for voice assistant/cancel dialing, double-click for redial last digit.
- A Button: Click for intercom A pairing, long press to disconnect intercom, double click for intercom D pairing.
- B Button: Click for intercom B pairing, long press to disconnect intercom, double tap for intercom E pairing.
- C Button: Click to pair C, long press to disconnect.
- FM Button: No operation.
Specifications
V4 Plus Specifications
| Feature | Detail |
|---|---|
| Model | V4 Plus |
| Number of Intercoms | 4 people |
| Bluetooth Version | 5.1 |
| FM Function | Yes |
| Operation Voice Prompt | Yes |
| Adaptable Handle | EUC (optional accessory) |
| Intercom Distance | 1500 meters (4 sets of distance) |
| Charging Interface | Type-C |
| Waterproof Grade | IP65 |
| Charger Specification | DC5V/1A (excluding charger) |
| Working Voltage | 3.7V |
| Battery Capacity | 750mAh |
| Charging Time | 2H |
| Standby Time | 150H |
| Intercom Time | 18H |
| Music Time | 24H |
| Mobile Phone Connection Distance | 10M |
| Working Temperature | -10°~50°C |
V6 Pro+ Specifications
| Feature | Detail |
|---|---|
| Model | V6 Pro+ |
| Number of Intercoms | Up to 6 riders (2 talk simultaneously) |
| Bluetooth Version | 5.1 |
| Intercom Distance | 800 meters |
| Intercom Time | 18 hours |
| Music Time | 25 hours |
| Standby Time | 260 hours |
| Waterproof Grade | IP65 |
| Connect to Mobile Phones | Yes (2 phones) |
| Automatic Call Connection | Yes |
General Product Properties
| Property | Value |
|---|---|
| Battery Included | Yes |
| Support Intercom | Yes |
| Special Features | Waterproof |
| Item Weight | 0.6 kg |
| Item Dimensions (L x W x H) | 8.5 cm x 4.5 cm x 1.5 cm |
| External Testing Certification | CE |
| Applicable Helmet Type | Half Helmet |
| Power Supply Mode | Built-in Battery |
| Connection Mode | Wire |
| Maximum Number of Speakers | 3 |
| Maximum Intercom Distance | >1000m |
| Origin | Mainland China |
| Item Type | Helmet Headset |
Maintenance
- Cleaning: Use a soft, damp cloth to clean the intercom unit. Avoid using harsh chemicals or abrasive cleaners.
- Battery Care: As mentioned in safety information, ensure the battery is adequately charged (at least 50%) before long-term storage to preserve its lifespan.
- Headphone Interface: Always ensure the headphone interface is fully inserted to maintain waterproof integrity.
Troubleshooting
If you encounter issues with your EJEAS intercom system, try the following steps:
- No Power: Ensure the unit is fully charged. Check the charging cable and adapter.
- Cannot Pair with Phone: Ensure the intercom is in pairing mode (long press Phone Button) and your phone's Bluetooth is enabled and discoverable. Try clearing previous pairings on both devices.
- Intercom Not Connecting: Ensure both units are powered on and within range. Try clearing all pairings and re-pairing the units according to the instructions.
- Poor Audio Quality/Noise: Check microphone and speaker placement. Ensure the CVC noise reduction is active. If using in wet conditions, confirm the headphone interface is fully inserted.
- Buttons Unresponsive: Try restarting the unit. If the issue persists, the unit may require service.
User Tips
- Optimal Charging: Always use the recommended DC5V/1A charger to prolong battery life and prevent damage.
- Firm Connections: Ensure all cables, especially the headset and charging port, are firmly and fully inserted to maintain waterproof integrity and stable connections.
- Regular Clearing: If you frequently pair with different devices or experience pairing issues, regularly clear all pairing records to ensure a fresh connection.
- Microphone Placement: For the best noise reduction and voice clarity, position the microphone as close to your mouth as possible without it touching or being obstructed.
Warranty & Support
For detailed warranty information and further support, please refer to the official user manual PDF. You can download the comprehensive user manual by scanning the QR code on the product packaging or by visiting the EJEAS website.
A digital version of the user manual is available here: EJEAS User Manual (PDF)