GRENNOVA GRE-N-1500

Contents

GRENNOVA 1500W Peak Power Pure Sine Wave Inverter User Manual

Model: GRE-N-1500

GRENNOVA 1500W Pure Sine Wave Inverter

GRENNOVA 1500W Pure Sine Wave Inverter with included cables.

1. Product Introduction

Thank you for choosing GRENNOVA. We are dedicated to providing efficient, stable, and safe green energy and off-grid power solutions worldwide. This manual provides essential information for the safe and effective use of your GRENNOVA Pure Sine Wave Inverter.

Product Series Overview

  • Alpha Series (Basic): Modified sine wave, single voltage input, LED indicators. Suitable for basic home appliances and lighting.
  • Gemini Series (Advanced): Modified sine wave, Dual Voltage Auto-Recognition (e.g., 12V/24V compatible), equipped with a smart LCD screen.
  • Nova Series (Professional): Pure sine wave, single voltage input. Provides pure AC power identical to the grid. Designed for sensitive electronics, motors, and inductive loads (like fridges/ACs). LCD screen included (except 500W).

Your inverter belongs to the Nova Series, offering pure sine wave output for sensitive electronics.

Video: GRENNOVA Pure Sine Wave Inverter Product Overview and Demonstration.

2. Safety & Precautions

WARNING: Failure to follow these safety instructions may result in serious injury or damage to the inverter and connected devices.

  • High Voltage Danger: The output sockets contain high-voltage AC identical to commercial power grids. DO NOT touch the inside of the sockets or operate with wet hands!
  • NO Reverse Polarity: When connecting the battery, you must STRICTLY distinguish the positive and negative poles (Red to Positive +, Black to Negative -). Reverse connection will blow internal fuses and cause permanent damage.
  • NO Grid Connection: Never plug the inverter's AC output into a wall outlet (commercial grid), as this will instantly destroy the unit.
  • Ventilation: The inverter generates heat during operation. Leave at least 10cm of clearance around the unit and never block the cooling fans.
Smart LCD Display with error codes

Smart LCD Display showing error codes for various protection mechanisms.

3. Setup & Installation

Critical - Input Voltage Matching

Ensure your battery system voltage matches the inverter's input voltage. Using an incorrect voltage can damage the inverter and connected devices.

System TypeVoltage Range
12V System9.5V - 15.5V
24V System19.5V - 29.5V
48V System40.5V - 56.5V
60V System51.5V - 73.5V
72V System62.5V - 88.5V

Standard Operation Steps

  1. Preparation: Ensure the power switch on the inverter is in the "OFF" position.
  2. Wiring: Connect the provided DC cables securely to the inverter's DC terminals first. Tighten the nuts to prevent overheating from poor contact. Then, connect the other ends to the battery (Red to +, Black to -). A small spark may occur when the cables touch the battery terminals due to the internal capacitors charging. This is normal and safe.
Diagram of GRENNOVA Inverter showing LCD, Cooling Fan, Terminals, Universal Socket, and Power Switch

Diagram of GRENNOVA Inverter showing key components: LCD, Cooling Fan, Negative Terminal, Positive Terminal, Universal Socket, and Power Switch.

4. Operation

  1. Powering On: Flip the switch to "ON". The inverter will beep briefly for self-testing, and the Green LED (and LCD screen, if applicable) will turn on, indicating AC power is ready.
  2. Connecting Load: Ensure your appliance is turned OFF. Plug the appliance into the inverter's AC socket, then turn the appliance ON.
  3. Powering Off: Turn off the appliance first, unplug it, and then switch the inverter "OFF".
Inverter in camping scenario, charging phone

GRENNOVA Inverter in a camping setup, powering a phone and a lantern.

5. LCD Screen & Indicator Instructions

Applicable to models with LED indicators and LCD screens:

  • Green Indicator: Normal Operation. The inverter is stably outputting AC power.
  • Red Indicator (with Beeping): Fault Alarm. The protection mechanism has triggered, and the inverter has shut down (See Troubleshooting section).
  • LCD Screen: Once powered on, the screen displays real-time data:
    1. Battery Icon: Roughly indicates the remaining battery capacity.
    2. Input DC Voltage (DC V): Shows the real-time battery voltage, helping you determine if the battery is depleted.
    3. Output AC Voltage (AC V): Shows the current AC voltage being output (e.g., 220V or 110V).
Smart LCD Display showing real-time voltage and error indicators

Smart LCD Display showing real-time input/output voltage and battery status.

6. Technical Specifications

Please match the SKU on the bottom label of your product with the tables below to confirm the Rated Power. Never exceed the rated power (Inductive loads like motors require 3-7 times their rated power to start).

Nova Series (Pure Sine Wave / Single Volts / LCD Screen) - Model GRE-N-1500

FeatureSpecification
TypeSolar Inverter
Model NumberGRE-N-1500
Model NameGRE-Nova
Peak Power1500W
Rated Power (Continuous)800W
Load Power (W)800W
Input Voltage (V)12V/24V/48V/60V/72V (depending on model variant)
Output Voltage (V)110V/220V (depending on model variant)
ApplicationHome, Car, RV, Camping
Number of Plugs1
Number of USB1
Dimensions21*9.5*5.5cm (8.26*3.74*2.16 inches)
Weight950g / 33.5oz
CertificationCE, FCC, RoHS, UL
Detailed product dimensions and specifications for the GRENNOVA Inverter

Detailed product dimensions and specifications for the GRENNOVA Inverter.

7. Troubleshooting Guide

Fault SymptomPossible CauseSolution
Red LED on, Beeping, No AC OutputLow Voltage Protection: Battery depletedCheck if the DC voltage on the screen is below the working range. Recharge the battery immediately.
Over Voltage Protection: Voltage too highEnsure the battery voltage matches the inverter (e.g., do not connect a 12V inverter to a 24V battery).
Overload Protection: Appliance power too highUnplug the overloaded appliance, turn the inverter off, wait 5 seconds, and turn it back on.
Over Temperature: Inverter too hotTurn off the inverter, let it cool for 15 minutes. Ensure it is in a ventilated area and fans are not blocked.
No Response, LEDs offLoose Connection / Blown Fuse1. Check if the battery terminal nuts are tight.
2. If reverse polarity occurred, internal fuses are blown. Contact support.

8. Maintenance

Pro Tips for Longevity

  • Ventilation is Key: Keep at least 2 inches (5 cm) of space around the cooling fan to ensure proper airflow.
  • Avoid Thin Wires: Only use the original high-quality GRENNOVA cables provided with your inverter. Using thinner or inferior cables can lead to overheating and reduced performance.
  • Keep Dry: Avoid any contact with water or high-humidity environments to prevent short circuits and damage.
  • Clean Terminals: Periodically check and clean battery terminals and inverter connections to ensure they are free from corrosion and tightly fastened.

9. User Tips

  • For optimal performance and safety, always connect the inverter's cables DIRECTLY to your battery's positive and negative terminals. Avoid connecting to solar controller "Load" ports, as this can cause severe damage.
  • When powering inductive loads like refrigerators or power tools, remember that their starting power can be 3-7 times their continuous rated power. Ensure the inverter's peak power rating can handle these surges.
  • While the inverter is safe to leave on, it consumes a small amount of "no-load" battery power. To prolong battery life, it's recommended to turn off the inverter when not in use.

10. Frequently Asked Questions (FAQ)

Q1: Can I use this for my refrigerator or drill?
A: Our Nova series uses Pure Sine Wave technology, which is compatible with inductive loads like small fridges and drills. However, ensure the appliance's starting power doesn't exceed 800W.
Q2: Why did the wires get hot?
A: This is usually caused by loose terminal screws. Please ensure the alligator clips or ring terminals are tightly fastened to the posts.
Q3: Is it safe to leave it on all the time?
A: Yes, but it will consume a small amount of "no-load" battery power. We recommend turning it off when not in use to prolong battery life.
Q4: The red light is on, it's beeping, and there is no power. Is it broken?
A: No, your inverter's safety shield has activated to protect your devices! This usually happens for two reasons:
  1. Battery is depleted (Low Voltage): Recharge your battery immediately.
  2. Overload: The appliance you plugged in requires more power than the inverter can provide (especially motor-driven devices). Unplug it and restart the inverter.
Q5: Can I connect this inverter to the solar controller's "Load" port?
A: NEVER! The inverter draws massive current and will instantly burn out your solar charge controller. Always connect the inverter's cables DIRECTLY to your battery's positive and negative terminals.

11. Warranty & Support

GRENNOVA provides a 12-Month Limited Warranty from the date of purchase. We will repair or replace products with manufacturing defects free of charge during this period.

Disclaimer: The following are NOT covered by warranty:

  1. Blown fuses or motherboards caused by reverse polarity connection.
  2. Damage caused by connecting the output to the commercial power grid.
  3. Water damage or short circuits caused by use in wet/rainy environments.
  4. Damage caused by unauthorized disassembly, modification, or force majeure.

For further assistance or warranty claims, please refer to the official GRENNOVA support channels.

A comprehensive user manual in PDF format is available for download: User manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.