1. Introduction
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your TDD Galaxy Pro II LED Steering Wheel. Please read this manual thoroughly before use to ensure proper function and safety.
2. Safety & Warnings
Read all instructions before use to ensure safety and prevent damage. Failure to follow these instructions may result in damage to the product or personal injury.
Important Safety Information:
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries.
Important Safety Notice:
- Installation requires removal of the steering wheel airbag.
- Professional installation is strongly recommended.
- Incorrect installation may trigger airbag warning lights or system faults.
- Disconnect the vehicle battery before installation (wait at least 10 minutes).
3. Product Information
The TDD Galaxy Pro II LED Steering Wheel is a customized product designed to enhance your driving experience with integrated LED displays and dynamic UI icons.
Manufacturer Details:
- Manufacturer: Guangzhou Think Different Dynamics Technology Co., Ltd.
- Address: Room 401, Building 13, Longshan Industrial Park, No. 260 Yinglong Road, Tianhe District, Guangzhou
- EU Authorized Representative: Sophie Dupont, 8 bis rue Abel 75012 Paris, France
- Contact: info@tddynamics.com (Manufacturer), Sophie Dupont@proconseilfr.com (EU Representative)
- Tel (EU Representative): 33-0780843245
Product Identification:
- Product Name: LED steering wheel
- Model: SW-LED-01
- Batch Number: 00001
4. Setup and Installation
Professional installation is highly recommended due to the complexity and safety implications involving the vehicle's airbag system. Ensure the vehicle battery is disconnected for at least 10 minutes before beginning installation.
4.1 Wiring Instructions
Method 1: For Steering Wheels with 12V and Ground Cables (Mainly EU and USA Car Models)
- Connect Connector B to Socket Port A.
- Connect Connector C to the Car OBD II port.
- Use Connector D as the OBD II socket.
- The Power Boost Cable serves as a backup power cable.
Method 2: For Steering Wheels without 12V Power Cable
- Connect Horn Cable (A) to the Horn cable connection point (B).
- Connect Horn cable on the down side clock spring (C) to allow power to flow through A to C.
- Connect IN B+ cable to A Cable.
- Connect OUT B+ cable to B point.
- Connect GND cable to ground.
- Connect OBD Box harness power boost cable to C.
Method 3: Building 12V and Ground Cable (Mainly Japanese and some old Car Models)
- Identify empty holes on the upper and lower clock spring sockets.
- Insert cables to build power for A to C, and ground for B to D.
- Ensure the clock spring has pins for A, B, C, D points.
- Insert outside power cable into point C and outside ground cable into point D.
- Connect IN B+ cable to A Cable.
- Connect GND cable to B Cable.
- OUT B+ Cable is not needed and serves as a backup.
4.2 Specific Wiring for Certain Car Models
Some car models may require additional wiring modifications:
- Wire Cutting: For certain models (e.g., Mustang, Dodge, Jeep, Lincoln), you may need to cut a specific wire. Pay close attention to the wire's position as indicated in the diagram. This is necessary if the car cannot start the OBD box automatically or if the OBD box does not enter sleep mode.
- Ignition Switch Connection: Connect cable A to a power cable that supplies power ONLY when the car is in the start position. This prevents battery drain. The OBD Box will turn off when the car is off and turn on when the car starts, ensuring proper function with the LED steering wheel.
4.3 Matching the LED Steering Wheel
- To match the LED Steering Wheel, hold and press button A.
- Matching can be performed when the screen is in matching mode and within the specified time frame.
- Alternatively, hold and press both buttons to turn on the screen for matching mode.
5. Operating Instructions
5.1 Dynamic UI and Themes
The Galaxy Pro II offers an enhanced visual experience with all-new upgraded dynamic icons and 8 distinct UI themes to suit various driving styles and preferences.
5.2 Data Display
The steering wheel features a large color screen (23x38mm) for clear visibility of important driving data. More than 14 functions are available to help you drive better.
Displayed data includes:
- RPM (Revolutions Per Minute)
- Speed (km/h or mph)
- Engine Temperature
- Oil Status
- Battery Voltage
- Engine Load
- Racing Mode
- Settings
- And many more functions.
Note: RPM setting from 1K to 9.9K will cause all lights to flash. Unit data can be configured to fit your country's standards.
5.3 Mobile Application Control
The companion app for iOS and Android allows you to view real-time OBD data, customize settings, and control various features of your steering wheel.
App features include:
- Real-time OBD data display.
- Puddle Shifter Flexible Setup.
- LED Color Settings.
- Driving Data Record.
5.4 LED Turn Signal and Hazard Warning Display
The integrated LEDs on the steering wheel provide visual cues for turn signals and hazard warnings, enhancing safety and driver awareness.
6. Maintenance & Storage
Storage:
Store the Galaxy Pro steering wheel display in a dry, well-ventilated environment. Avoid direct sunlight, high humidity, or extreme temperatures to prevent internal electronic damage or screen aging.
Cleaning:
For daily cleaning, use a soft microfiber cloth lightly dampened with a small amount of alcohol to gently wipe the screen and housing. Do not spray alcohol directly onto the unit.
Precautions:
Do not rinse with water or expose the unit to moisture. Avoid liquid intrusion into connectors, wiring ports, or internal components to prevent short circuits or malfunction.
7. Troubleshooting
If you encounter any issues with your TDD Galaxy Pro II LED Steering Wheel, please refer to the following common problems and solutions:
- LED Lights Not Flashing at Desired RPM: Ensure the RPM setting in the system is correctly configured between 1K and 9.9K.
- OBD Data Not Showing on Phone: Verify that the companion app is correctly installed and connected via Bluetooth to the steering wheel. Check your phone's Bluetooth settings.
- Incorrect Unit Data Displayed: Access the settings within the steering wheel system or companion app to adjust unit data (e.g., km/h to mph) to match your country's standards.
- Angle Sensor or Parking Assistance Functionality Issues: The functionality of angle sensors and parking assistance may vary depending on the specific car model. If you experience issues, contact the sales team for standard data or compatibility information.
- Airbag Warning Lights or System Faults After Installation: This indicates an incorrect installation. Professional installation is strongly recommended to avoid such issues. Recheck all wiring connections and ensure the vehicle battery was disconnected for the recommended time during installation.
- Product Does Not Fit: If the product size does not fit your vehicle, contact the seller directly for assistance.
- Received Wrong Color: If you believe the item received is in the wrong color, contact the seller to inquire about return or refund options.
For further assistance, please contact our sales team.
8. Specifications
| Feature | Detail |
|---|---|
| Product Type | Steering Wheels |
| Product Name | Galaxy Pro II LED Steering Wheel |
| Model | SW-LED-01 |
| Brand Name | TDD |
| Material | Glossy Carbon Fiber, Real Carbon Fiber (3K 240g Carbon Fiber, 6 Resin Layers, ABS/Plastic) |
| Origin | Mainland China |
| Warranty | 1 year |
| Screen Size | 23x38mm |
| Package Dimensions (L x W x H) | 43 cm x 42 cm x 19 cm |
| Package Weight | 4.0 kg |
| Leather Material Options | Italian Suede Leather, Super Micro-Fiber Leather, Lichi Texture Leather, Smooth Leather, Perforated Leather, Nappa Leather |
9. User Tips
- You can easily swap your original steering wheel accessories (buttons, paddle shifters, etc.) onto the new steering wheel to save cost.
- The steering wheel can be customized based on your original steering wheel's condition (second-hand or new aftermarket). The best option will be chosen for your order.
- The software and hardware of your steering wheel can be upgraded to the latest model by our R&D team.
- If your car model (e.g., BMW G21 M340i xDrive) is not explicitly listed, it is recommended to confirm compatibility with the seller before purchase.
- If certain functions like angle sensor or parking assistance do not work as expected, contact the sales team for support, as compatibility can vary between car models.
10. Warranty & Support
Warranty:
- 1-Year Free Replacement: Buyers may request a free replacement within 15 days of receiving the product if it is damaged or lost when returned, provided it is in original conditions.
- 12-Month Free Maintenance: We provide 12-month free maintenance. The buyer should return the product in original conditions and bear shipping costs for return. If any part needs replacement, the buyer is responsible for the cost of parts.
Support:
For any questions or support needs, please contact our sales team at info@tddmotors.com.
11. Compliance Information
This product complies with relevant European and UK regulations.
Markings:
- CE Mark: Indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
- UKCA Mark: Indicates conformity with the applicable requirements for products sold within Great Britain (England, Scotland, and Wales).
- RoHS Compliant: Restricts the use of certain hazardous substances in electrical and electronic equipment.
Recycling Information:
This product and its packaging materials should be disposed of responsibly. Please follow local regulations for recycling electronic waste and packaging. Do not dispose of with general household waste.