TOPDON ArtiDiag800 BT 2

Contents

TOPDON ArtiDiag800 BT 2 Diagnostic Tool User Manual

Professional Diagnostic Tool

1. Safety Information

For your safety, the safety of others, and to avoid any damage to the product and your vehicle, CAREFULLY READ AND MAKE SURE YOU FULLY UNDERSTAND ALL THE SAFETY INSTRUCTIONS AND MESSAGES IN THIS MANUAL BEFORE OPERATING. You must also read the vehicle's service manual, and observe the stated precautions or instructions before and during any test or service procedure.

  • Keep yourself, your clothing and other objects away from moving or hot engine parts and avoid contact with electrical connections.
  • ONLY OPERATE THE VEHICLE IN A WELL-VENTILATED AREA, as the vehicle produces carbon monoxide, a toxic and poisonous gas, and particulate matter when the engine is running.
  • ALWAYS WEAR approved SAFETY GOGGLES to prevent damage from sharp objects and caustic liquids.
  • DO NOT SMOKE OR HAVE ANY FLAMES NEAR THE VEHICLE when testing. The fuel and battery vapors are highly flammable.
  • DO NOT ATTEMPT TO INTERACT WITH THE PRODUCT WHILE DRIVING. Any distraction may cause an accident.
  • TURN THE IGNITION OFF BEFORE CONNECTING OR DISCONNECTING THE PRODUCT FROM THE VEHICLE'S DATA LINK CONNECTOR (DLC) to prevent causing damage to the product or vehicle's electronic components.

2. What's in the Box?

The TOPDON ArtiDiag800 BT 2 package includes the following items:

  • ArtiDiag800 BT 2 Diagnostic Tool
  • MDCI Mini Dongle
  • USB Cable
  • Carrying Case
  • 3-in-1 Adapter
  • Quick User Guide
  • User Manual
  • Password Letter
Contents of the TOPDON ArtiDiag800 BT 2 box, including the diagnostic tool, VCI dongle, cables, adapters, and carrying case.
Figure 2-1: What's in the Box

For a visual guide to the package contents, please watch the unboxing video below:

Video: Unboxing and overview of the ArtiDiag800 BT 2 contents.

3. Product Overview

Diagram of the ArtiDiag800 BT 2 diagnostic tool and VCI dongle with numbered parts.
Figure 3-1: ArtiDiag800 BT 2 Components

Component Descriptions:

  1. Power/Screen Off Button: Press for three seconds to display the Power off/Restart/Cancel toolbar. Short press to wake up/lock the screen.
  2. Type-C & Type-A Port: USB Type-C for charging and file transfer. USB Type-A for mouse or USB flash drive.
  3. Six-inch Touch Screen: Main display for interaction.
  4. Audio Speaker: Provides audio feedback.
  5. Diagnostic MDCI Mini Dongle Compartment: Designed to hold the MDCI Mini Dongle.
  6. Diagnostic MDCI Mini Dongle: The wireless communication interface.
  7. OBD Port: Plug into the DLC of the vehicle.

4. Getting Started

4.1 Basic Setup

Press and hold the power button for 3 seconds to turn on the ArtiDiag800 BT 2. Follow these steps to set up your device:

  1. Select Language: Choose your desired system language.
  2. Choose Region and Time Zone: Select the appropriate region and time zone.
  3. Configure Wi-Fi: Select a Wi-Fi network from the scanned list and enter the password.
  4. Log in to TOPDON Account: Log in with your existing TOPDON account or register for a new one using your email.

4.2 Plug the MDCI Mini Dongle into the Vehicle's DLC

Take the ArtiDiag800 BT 2 MDCI Mini Dongle out from its compartment and plug it into the vehicle's DLC port, typically located under the dashboard. Once connected, the indicator turns solid green.

Diagram showing how to connect the MDCI Mini Dongle to the vehicle's DLC port.
Figure 4-2: Connecting the MDCI Mini Dongle

Note: Make sure the ignition is always OFF before plugging in the unit.

4.3 Turn On the Ignition

Turn the ignition to the "ON" position. If your vehicle is equipped with a keyless start system and the ignition switch is an "Engine Start Stop" button, press the "Engine Start Stop" button until the car is in "ON" mode. Do not apply the brake while pressing the "Engine Start Stop" button or you will start the car instead of putting it in the "ON" position.

Diagram showing ignition switch positions: Lock, ACC, ON, Start.
Figure 4-3: Ignition Switch Positions
Diagram showing an Engine Start Stop button.
Figure 4-4: Engine Start Stop Button

The method of ignition varies by vehicle model. Refer to the vehicle's service manual for details.

5. Operating Your ArtiDiag

5.1 Home Screen Functions

Screenshot of the ArtiDiag800 BT 2 home screen showing Diagnostics, OBD II/EOBD, Maintenance, History, Update, Mall, Library, Feedback, and User Info icons.
Figure 5-1: Home Screen Overview
  • Diagnostics: Performs diagnostic functions including reading/clearing DTCs, viewing data stream, and reading ECU information.
  • OBDII/EOBD: Performs emission-related diagnostics.
  • Maintenance: Accesses 28+ special maintenance services.
  • History: Accesses reports, replay data, screenshots, and screen recordings.
  • Update: Updates vehicle-specific diagnostic software.
  • Mall: Allows users to purchase gateway access rights.
  • Library: Provides reference information like DTC Repair Guide, TSBs, DLC Location, Warning Light Library, Vehicle Coverage Lookup, User Manual, and Quick Support.
  • Feedback: Allows users to submit problems encountered to TOPDON.
  • User Info: Manages VCI, firmware updates, diagnostic software, user profile, customer management, help, shop info, order management, settings, and system updates.

5.2 Diagnostics

The Diagnostics module allows you to scan supported vehicle systems (Auto Scan) for Diagnostic Trouble Codes (DTCs) or select an individual system to perform Read ECU Information, Read DTCs, Clear DTCs, and Read Data Stream.

Identifying the Vehicle

To perform Auto Scan or Individual System Diagnostics, tap Diagnostics from the home screen. The ArtiDiag800 BT 2 can identify your vehicle by utilizing the VIN or vehicle make.

Screenshot of the VIN identification screen with options for Auto VIN and Enter VIN.
Figure 5-2: VIN Identification Screen

Note: Not all vehicles support automatic VIN reading. Manual VIN entry is available.

Perform OBDII Diagnostics

The OBDII/EOBD function allows you to perform emission-related diagnostics. Select your communication method (Auto Scan or Protocol) and then choose a function to continue.

Diagnostic Feedback

The ArtiDiag800 BT 2 allows you to instantly send diagnostic feedback (with logs of diagnostic data automatically attached) while encountering a software problem. Tap the feedback icon on the top right corner of any screen, select the problem type, write a description, and tap Submit.

6. Maintenance Services

The ArtiDiag800 BT 2 offers 28+ special maintenance services for comprehensive vehicle care. These services include:

Diagram showing 28+ special functions including Oil Reset, SAS Reset, EPB Reset, BMS Reset, DPF Regeneration, ABS Bleeding, IMMOBILIZER, Sunroof Reset, Gearbox Reset, Injector Coding, Throttle Adaptation, and more.
Figure 6-1: 28+ Special Functions
  • Oil Reset: Resets the oil service lamp for the engine oil life system.
  • Throttle Adaptation: Initializes throttle actuators if the ECU is disconnected or throttle is replaced/cleaned.
  • EPB Reset: Replaces and resets brake pads.
  • Steering Angle Reset: Finds the relative zero position for the steering angle sensor.
  • DPF Regeneration: Used for regeneration of diesel particulate filters.
  • ABS Bleeding: Performs tests to check the operating conditions of the Anti-lock Braking System.
  • BMS Reset: Resets the car battery control unit after battery replacement.
  • Injector Coding: Writes or rewrites injector codes in the ECU for accurate cylinder injection quantity.
  • Tire Pressure Reset: Resets tire pressure information and turns off the fault indicator.
  • Airbag Reset: Resets airbag data to clear collision fault indicators.
  • Sunroof Initialization: Sets sunroof lock, auto-close, memory function, and temperature thresholds.
  • Seat Calibration: Matches replaced/repaired seats with memory function.
  • Windows Calibration: Recovers ECU initial memory and automatic ascending/descending function of power windows.
  • Suspension Level Calibration: Calibrates vehicle level after replacing level sensor or control module.
  • AdBlue Reset: Required after replacing or filling diesel exhaust treatment fluid.
  • A/F Reset: Sets or learns Air/Fuel ratio parameters.
  • NOx Sensor Reset: Resets catalytic converter learned value in the engine ECU.
  • Stop/Start Reset: Enables or disables automatic start-stop function.
  • AFS Reset: Initializes the adaptive headlamp system.
  • Gear Learning: Performs tooth learning to turn off the MIL.
  • Language Change: Changes the system language of the vehicle central control panel.
  • Transport Mode Deactivation: Deactivates transport mode for normal vehicle function.
  • Gearbox Matching: Completes gearbox self-learning to improve gear shifting quality.
  • EGR Adaption: Learns the EGR valve after cleaning or replacement.
  • Immobiliser Matching: Matches anti-theft key after replacing ignition components.
  • Coolant Bleeding: Activates electronic water pump before venting the cooling system.
  • Tire Reset: Sets size parameters for modified or replaced tires.
  • ODO Reset: Copies and writes kilometer values to the odometer chip.

6.1 Full System Diagnostics

The ArtiDiag800 BT 2 provides OE-level full-system diagnostics to uncover hidden issues for every system in your vehicle. This includes reading ECU info, clearing fault codes, reading fault codes, and reading data stream for systems like Engine, EPB, BMS, TPMS, SRS, SAS, Transmission, and ABS.

Diagram showing OE-Level Full-System Diagnostics for various car systems.
Figure 6-2: OE-Level Full-System Diagnostics

6.2 Extensive Brand Compatibility

The ArtiDiag800 BT 2 supports over 80 brands and 10,000+ vehicle models across Europe, America, Asia, and Australia.

Table listing extensive brand compatibility for Europe, America, Asia, and Australia.
Figure 6-3: Supported Vehicle Brands

7. Update

This function allows you to update the vehicle-specific Diagnostics software if there is any new software available. It is recommended to update the system for better service if a new version is available on the User Info > System Update module and update the vehicle-specific diagnostic software if a new version is available on the Update module.

To perform the Update function, tap Update from the home screen. You can also tap Select at the top right corner to batch select and update software.

8. History

This function gives access to Reports (All, System Report, Fault Code Report, and Data Stream Report), Replay Data, Screenshots and Screen Rec.

  • Reports: View details of saved reports.
  • Replay Data: View recorded data stream lists and play recorded video of data streams.
  • Screenshots: View screenshots saved during operation.
  • Screen Rec.: View screen recordings saved during operation.

9. Library

The Library provides various reference materials:

  • DTC Repair Guide: An experience-based database providing code-specific information, popular fixes, and repair steps.
  • TSB (Technical Service Bulletins): View OEM technical service bulletins.
  • DLC Location: Provides images of DLC locations for specific vehicles.
  • Warning Light Library: Information on dashboard warning lights, descriptions, impacts, causes, and FAQs.
  • Vehicle Coverage Lookup: Verify supported vehicle makes and models.
  • User Manual: Provides an electronic copy of the ArtiDiag800 BT 2 user manual. A PDF version is available at User Manual (PDF).
  • Quick Support: Contact support personnel for timely assistance.

10. User Info & Settings

The User Info function provides access to VCI Management, Firmware Update, Uninstall Diagnostic Software, User Info, Customer Management, Help, Shop Info, Order Management, Settings, and System Update.

  • VCI Management: Add and bind VCIs after Bluetooth connection.
  • Firmware Update: Update firmware if a new version is available.
  • Uninstall Diagnostic Software: Remove previously installed diagnostic software.
  • User Info: Change profile avatar/nickname, view email/TOPDON ID, change password, delete account, log out.
  • Help: View frequently asked questions and responsive measures.
  • Shop Info: Save repair shop information.
  • System Update: Update the software if a new version is available.
  • Settings: Configure WLAN, time/date, languages/unit, check storage, access file manager, view version info, update ArtiDiag800 BT 2, view Terms of Service/Privacy Policy, set Auto-Lock time, view tablet info, and log out.
  • Customer Management: Add, edit, and delete customers.
  • Order Management: Manage orders.

11. Specifications

TOPDON ArtiDiag800 BT 2 Tablet

Display Screen1440 * 720 Touchable Screen
RAM2 GB
ROM64 GB
Battery Capacity5050 mAh/3.7 V
Input Voltage5 V
Working Temperature14°F to 122°F (-10°C to 50°C)
Storage Temperature-4°F to 140°F (-20°C to 60°C)
Dimension (L x W x H)8.5*5.0*1.8 inch (215*126*46 mm)
Net Weight660 g (1.46 lb)
Gross Weight1520 g (3.35 lb)

TOPDON ArtiDiag800 BT 2 Diagnostic MDCI Mini Dongle

Working Voltage9-18V
Working Current< 130 mA
Working Temperature14°F to 122°F (-10°C to 50°C)
Storage Temperature-4°F to 140°F (-20°C to 60°C)

Comparison with other models:

Comparison table of ArtiDiag800 BT 2 with models 909 and 808, detailing Price, CPU, Screen Size, RAM, ROM, Battery, Android Version, All System Diagnosis, FCA SGW Unlock, CANFD, Maintenance, Upgrade, and Bi-Directional Control.
Figure 11-1: ArtiDiag800 BT 2 vs. Other Models

12. Troubleshooting (FAQ)

  • Q: What if the ArtiDiag800 BT 2 has no responses when connected to a car?
    A: Confirm the following: 1) Stable connection between MDCI Mini Dongle and DLC port. 2) Ignition is ON. 3) Tool supports the car. 4) Scanner and MDCI Mini Dongle versions are up to date. 5) Check the indicator color on the MDCI Mini Dongle. Alternatively, send your vehicle's year, make, model, and VIN to support via the Feedback feature.
  • Q: Why does the system stop when reading the data stream?
    A: This may be caused by a loose diagnostic MDCI Mini Dongle. Unplug and re-plug the MDCI Mini Dongle to ensure a stable and solid reconnection.
  • Q: What special functions does the ArtiDiag800 BT 2 support?
    A: The ArtiDiag800 BT 2 supports 28 special functions, as detailed in the Maintenance Services section.
  • Q: Why does the screen flash when the engine ignition starts?
    A: This is a normal occurrence caused by electromagnetic interference.
  • Q: How to upgrade the system software?
    A: 1) Power on the tool and ensure a stable Internet connection. 2) Go to User Info > System Update. 3) Follow on-screen instructions. The tool will restart after completion.
  • Q: How to capture a screenshot?
    A: Swipe down and tap Screenshot, then tap the camera icon. View saved images in History > Screenshots.
  • Q: Does the MDCI Mini Dongle need to be updated?
    A: Yes, go to User Info on the home screen and tap Firmware Update. The firmware can only be updated when the scanner is connected to the internet and the MDCI Mini Dongle is connected to a vehicle. After the update, remove and re-plug the MDCI Mini Dongle.
  • Q: Is it possible to receive lifetime updates for this model?
    A: The ArtiDiag800 BT 2 comes with 2 years of free updates.

13. User Tips

  • Always ensure a stable connection between the MDCI Mini Dongle and the vehicle's DLC port for uninterrupted diagnostics.
  • Regularly check for and install system and diagnostic software updates via the 'Update' module to ensure optimal performance and compatibility with the latest vehicle models.
  • If AutoVIN does not work, manually enter the VIN for accurate vehicle identification.
  • When viewing live data streams while driving, always have a second person assist you to avoid distraction.

14. Warranty and Support

14.1 TOPDON One Year Limited Warranty

TOPDON warrants to its original purchaser that the company's products will be free from defects in material and workmanship for 12 months from the date of purchase (Warranty Period). For defects reported during the Warranty Period, TOPDON will either repair or replace the defective part or product according to its technical support analysis and confirmation. TOPDON shall not be liable for any incidental or consequential damages arising from the device's use, misuse, or mounting. If there is any conflict between the TOPDON warranty policy and local laws, the local laws shall prevail.

This limited warranty is void under the following conditions:

  • Misused, disassembled, altered or repaired by unauthorized stores or technicians.
  • Careless handling and/or improper operation.

Notice: All information in this manual is based on the latest information available at the time of publication and no warranty can be made for its accuracy or completeness. TOPDON reserves the right to make changes at any time without notice.

14.2 Support

For further support, you can contact TOPDON via:

  • Phone (China): +86-755-21612590
  • Phone (North America): +1-833-629-4832
  • Phone (Europe): +34 930 038 094
  • Email: SUPPORT@TOPDON.COM
  • Website: WWW.TOPDON.COM

You can also scan the QR code below for more support:

QR code for TOPDON support.
Figure 14-1: Scan for Support

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.