1. Introduction
Thank you for choosing the Aramox Bluetooth Pillow Speaker. This device is designed to provide a personalized and comfortable audio experience, ideal for relaxation, sleep, and meditation. Its slim design and advanced features ensure high-quality sound without disturbing others.
2. Safety Information
- WARNING: DO NOT IMMERSE IN WATER! This device is not waterproof.
- Keep the device away from extreme temperatures and direct sunlight.
- Do not attempt to disassemble or repair the device yourself. Contact support if service is needed.
- Use only the specified charging voltage (5V 1A) to prevent damage.
3. Package Contents
Please check the box for the following items:
- 1 x Bluetooth Sleep Speaker
- 1 x Type-C Charging Cable (power adapter not included)
- 1 x User Manual (this document)
4. Product Overview
The Aramox Bluetooth Pillow Speaker features a compact and comfortable design, making it ideal for placement under a pillow. It includes intuitive controls for easy operation.
5. Setup Guide
5.1. Charging the Device
- Locate the Type-C charging port on the side of the speaker.
- Connect the provided Type-C charging cable to the speaker and a 5V 1A power adapter (not included).
- The charging indicator light will illuminate. Once fully charged, the light may change color or turn off.
- A full charge provides approximately 20-48 hours of playtime.
5.2. Bluetooth Pairing
- Ensure the speaker is charged.
- Press and hold the Power Key (leftmost button, as shown in the diagram) to turn on the speaker. The speaker will enter Bluetooth pairing mode, indicated by a flashing LED light.
- On your mobile device (smartphone, tablet, etc.), go to Bluetooth settings and enable Bluetooth.
- Search for available devices. The speaker should appear as "Bluetooth Sleep Speaker" or a similar name.
- Select the speaker from the list to pair. Once paired, the LED light will stop flashing and remain solid.
- You can now play audio from your device through the pillow speaker.
6. Operating Instructions
6.1. Basic Controls
- Power On/Off & White Noise: Press and hold the Power Key (leftmost button) to turn the speaker on or off. A short press of this button will activate or cycle through white noise sounds.
- Volume & Next Song: Use the middle button. A short press typically adjusts volume (e.g., Volume +), while a long press might skip to the next song.
- Timer Settings: Use the rightmost button to set an automatic shutoff timer. Options include 30, 60, or 90 minutes. Press the button to cycle through these options.
6.2. Audio Experience
The speaker features HiFi sound with a 20-20KHz frequency response and a 40mm dynamic driver, providing rich and clear audio for a quiet ambiance.
7. Maintenance
- Cleaning: Wipe the speaker with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
- Storage: Store the device in a cool, dry place when not in use. Avoid placing heavy objects on it.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in constant use.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery. | Charge the speaker using the Type-C cable. |
| Cannot pair via Bluetooth. | Speaker not in pairing mode; Bluetooth off on source device; too far from source device. | Ensure speaker is in pairing mode (flashing LED). Turn on Bluetooth on your device. Move speaker closer to your device (within 10 meters). |
| No sound after pairing. | Volume too low on speaker or source device; incorrect audio output selected on source device. | Increase volume on both the speaker and your connected device. Check your device's audio output settings. |
| Sound quality is poor or intermittent. | Interference; low battery; device too far. | Move away from other wireless devices. Charge the speaker. Move closer to the source device. |
9. Specifications
| Feature | Detail |
|---|---|
| Product Name | Bluetooth Pillow Speaker White Noise Automatic Off Timer Timer Bedside Speaker for Sleeping |
| Model | 26102600248 |
| Batch/Serial Number | ALI8129022582 |
| Brand | Aramox |
| Product Material | ABS, PC, Polyester Fiber |
| Battery | 250mAh Li Battery (Built-in) |
| Playtime | 20-48 hours (per charge) |
| Charging Port | Type-C (5V 1A fast charging) |
| Speaker Diameter | Approx. 9.6 cm / 3.8 in |
| Speaker Thickness | Approx. 1.1 cm / 0.4 in |
| Product Weight | Approx. 48 g / 1.7 oz |
| Bluetooth Version | 5.4 |
| Frequency Response | 20-20KHz |
| Dynamic Driver | 40mm |
| Sound Mode | Hi-Res Sound Mode |
| Audio Crossover | Full-Range |
| Number of Loudspeaker Enclosure | 1 |
| Waterproof | No |
| Voice Control | Yes (details not provided) |
| Support APP | Yes (details not provided) |
10. User Tips
- Optimal Placement: For best sound and comfort, place the speaker directly under your pillow, centered with your head.
- Volume Control: Adjust the volume to a gentle level that is audible to you but does not disturb others or cause discomfort.
- White Noise: Experiment with the built-in white noise functions to find the most soothing sound for your sleep or meditation.
- Timer Use: Utilize the auto-off timer to conserve battery and ensure the speaker turns off after you've fallen asleep.
11. Warranty and Support
For warranty information and technical support, please refer to the official documentation or contact the manufacturer directly.
Manufacturer Information:
- Company Name: Yiwu Ruitong E-Commerce Co., Ltd.
- Address: No. 446, Chengdian Road, Yiwu City, Jinhua City, Zhejiang Province
- Email: 1651023361@163.com
- Telephone: 86-13564826455
EU Authorized Representative:
- Company Name: Yeepin GmbH
- Address: Alleestr.11, 67655 Kaiserslautern, Rheinland-Pfalz, Germany
- Email: sunshine12232@outlook.com
- Telephone: 49-1728986669
A user manual in PDF format is also available for download: View User Manual (PDF)