TEENRAM T10 W5W 194 168 LED Dome Ceiling Light Bulb

Contents

TEENRAM T10 W5W 194 168 LED Dome Ceiling Light Bulb User Manual

Model: T10 W5W 194 168 LED Dome Ceiling Light Bulb

Brand: TEENRAM

1. Introduction

Thank you for choosing the TEENRAM T10 W5W 194 168 LED Dome Ceiling Light Bulbs. These high-quality LED bulbs are designed to provide superior illumination and a refreshed look for your vehicle's interior and exterior lighting needs. This manual provides essential information for safe installation, operation, and maintenance of your new LED bulbs.

2. Safety Information

Please read all safety instructions carefully before installation and use. Keep this manual for future reference.

  • Ensure the vehicle's power is off before attempting any installation or maintenance to prevent electrical shock.
  • Wear appropriate safety gear, such as gloves and eye protection, during installation.
  • Handle LED bulbs with care to avoid damage to the chips or housing.
  • Do not touch the LED chips directly when the bulb is illuminated, as they can be hot.
  • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

3. Product Overview

The TEENRAM T10 LED bulbs offer advanced lighting technology with several key features:

  • No Dark Areas: Provides 360-degree illumination for super bright, uniform light output.
  • Long Lifespan: Equipped with a powerful cooling fan (where applicable for heat dissipation) to ensure a life expectancy of up to 50,000 hours.
  • CANBUS Error Free: Features a built-in intelligent IC driver for enhanced performance, energy efficiency, and compatibility, preventing error messages in most modern vehicles.
  • High Brightness: 300% brighter than standard halogen lamps, utilizing 12PCS 2835 SMD LED chips.
  • Extreme Temperature Resistance: Designed to operate reliably in temperatures ranging from -40°C to +80°C, suitable for various weather conditions.
TEENRAM T10 LED Bulb with CANBUS
Figure 3.1: TEENRAM T10 LED Bulb with CANBUS feature.
Size Comparison: T10 LED vs Halogen Bulb
Figure 3.2: Size comparison of T10 LED bulb (26mm length, 11mm width) to a traditional halogen bulb, highlighting similar dimensions for easy installation and superior lifespan (50,000 hours vs 1,000 hours).
LED vs Halogen Bulb Comparison
Figure 3.3: Comparison illustrating the benefits of LED bulbs (super bright, power saving, long lasting, immediate response) over halogen bulbs (dim, high power consumption, short lifespan, light up delay).

4. Specifications

Parameter Value
Base Type T10 (W5W/194/168/2825)
SMD Type 2835 SMD Chips
LED Quantity 12 PCS
LED Light Color White
Color Temperature 6000K
Luminous Flux 2400LM/set
Working Voltage DC 12V (compatible with 12-24V systems)
Wattage 6W
Rated Current 1.5A-10A
Operating Temperature -40°C to +80°C
Waterproof Rating IP67
Beam Angle 360 Degree
LED Lifetime 50,000 hours
Installation Plug and Play
Certifications CE, FCC, ROHS
Dimensions (approx.) 26mm (Length) x 11mm (Width) x 9mm (Base Width)
Product Parameter Diagram with Dimensions
Figure 4.1: Detailed product parameters and dimensions.

5. Installation

These T10 LED bulbs are designed for a 'Plug and Play' installation, making replacement straightforward. They are suitable for various applications including interior (Map, Dome, Cargo, Courtesy) lights, License Plate lights, Parking lights, Turn Signal lights, Corner lights, Side Marker lights, Tail lights, and Backup lights.

Specific Fitment: For Honda Accord 2013-2019.

TEENRAM T10 LED Bulbs installed in a Honda Accord
Figure 5.1: TEENRAM T10 LED bulbs shown in context for Honda Accord 2013-2019.

Installation Steps:

  1. Ensure your vehicle's ignition is off and the lights are cool to the touch.
  2. Locate the bulb you wish to replace. Refer to your vehicle's owner's manual for specific bulb locations and access points.
  3. Carefully remove the old bulb by twisting or pulling it out of its socket.
  4. Insert the new TEENRAM T10 LED bulb into the socket. Ensure it is seated firmly.
  5. Test the light function before reassembling any covers or housing. If the LED does not light up, remove it, rotate it 180 degrees, and reinsert it (LEDs are polarity sensitive).
  6. Once confirmed working, reassemble any removed components.

Important Note:

  • Always compare the bulb size with OEM specifications to ensure proper fitment.
  • Some vehicles may require a resistor (CANBUS decoder) to prevent hyper-flashing, flickering, or error messages on the dashboard. If you experience these issues, a CANBUS decoder may be necessary.

6. Operation

Once installed, the TEENRAM T10 LED bulbs operate automatically with your vehicle's lighting system. They provide instant-on, bright 6000K white light with a 360-degree beam angle for optimal visibility.

360 Degree Full Angle Illumination
Figure 6.1: Illustrates the 360-degree full angle illumination provided by the LED bulbs.
LED Bulb Extreme Temperature Performance
Figure 6.2: Demonstrates the LED bulb's ability to operate normally under extreme temperatures (-40°C to +80°C) for 50,000 hours.

7. Maintenance

TEENRAM T10 LED bulbs are designed for long-term, maintenance-free operation. Due to their robust construction and efficient heat dissipation, regular maintenance is generally not required.

  • Keep the bulb's surface clean from dust and debris. Use a soft, dry cloth if cleaning is necessary.
  • Avoid using harsh chemicals or abrasive materials on the bulbs.
  • Periodically check the connections to ensure they remain secure.

8. Troubleshooting

If you encounter any issues with your LED bulbs, please refer to the following common solutions:

Problem Possible Cause Solution
Bulb does not light up Incorrect polarity (LEDs are polarity sensitive); Loose connection; Faulty bulb/socket. Remove the bulb, rotate it 180 degrees, and reinsert. Ensure connections are secure. Test in another socket if possible.
Flickering, hyper-flashing, or dashboard error message Vehicle's CANBUS system detects lower power draw from LED bulbs, interpreting it as a faulty bulb. Install a CANBUS resistor/decoder (load equalizer) for each affected bulb.
Radio interference Electronic interference from the LED driver. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Dim or unclear light output Dust or debris on the bulb; Incorrect voltage. Clean the bulb surface. Verify vehicle voltage is within DC 12-24V range.
Stable Current Diagram for LED Bulbs
Figure 8.1: Diagram illustrating the stable current provided by the LED bulb's intelligent IC driver, preventing issues caused by unstable voltage.

9. User Tips

  • Before purchasing, double-check your vehicle's bulb type and size to ensure compatibility.
  • When replacing multiple bulbs, consider replacing them in pairs to maintain consistent light output and color temperature.
  • If you are unsure about the installation process, consult a professional automotive technician.
  • Always check local regulations regarding LED lighting modifications for your vehicle.

10. FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.