ABRIGHT Subaru Outback Car Interior LED Lights

Contents

ABRIGHT Car Interior LED Lights for Subaru Outback User Manual

Model: Subaru Outback Car Interior LED Lights

Brand: ABRIGHT

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your ABRIGHT Canbus Car Interior LED Lights kit for Subaru Outback models (1999-2020). These high-quality LED bulbs are designed to replace your original halogen bulbs, offering superior brightness and a modern aesthetic to your vehicle's interior lighting.

2. Warning & Safety Information

  • Do not operate while driving to ensure driving safety.
  • Avoid contact with high-temperature areas to prevent burns.
  • For indoor use only; not intended for exterior vehicle lighting.

3. Package Contents

The contents of your LED interior light kit vary depending on your Subaru Outback model year:

3.1. For Outback BE BH (1999-2004) - 10 Pieces

  • Map light (2 pieces)
  • Dome light (1 piece)
  • Trunk light (1 piece)
  • Footwell light (2 pieces)
  • Door light (2 pieces)
  • License plate light (2 pieces)

3.2. For Outback BL BP (2005-2009) - 9 Pieces

  • Map light (2 pieces)
  • Dome light (1 piece)
  • Glove Box light (1 piece)
  • Trunk light (1 piece)
  • Door light (2 pieces)
  • License plate light (2 pieces)

3.3. For Outback BR BS (2010-2020) - 12 Pieces

  • Map light (2 pieces)
  • Dome light (1 piece)
  • Vanity mirror light (4 pieces)
  • Trunk light (1 piece)
  • Door light (2 pieces)
  • License plate light (2 pieces)

4. Specifications

FeatureSpecification
Item TypeAtmosphere lamp
Special FeaturesReading light
Voltage12 V
MaterialLED
CertificationCE, RoHS
Brightness300% Brighter than original bulb (white color)
LifetimeOver 50,000 hours
Canbus100% No Error (No ECU Errors)
InstallationPlug and Play
ApplicationDome light, Map light, Trunk light, Vanity mirror light, Glove box light, Door light.
Item Weight0.1kg

5. Installation and Operation Instructions

Follow these steps to install and operate your ABRIGHT Car Interior LED Lights:

  1. **Preparation**: Turn off the vehicle's power supply before installation. This is crucial for safety and to prevent short circuits.
  2. **Access Light Housing**: Carefully open the interior dome light cover or other light housings where you intend to replace bulbs. You may need a plastic pry tool to avoid damaging the trim.
  3. **Remove Old Bulb**: Gently remove the original halogen bulb from its socket. Be cautious as the old bulb may be hot if recently used.
  4. **Insert LED Bulb**: Insert the new LED bulb into the light slot and secure it in place. If the LED does not light up immediately after installation, remove it, rotate it 180 degrees, and reinsert it. LED bulbs are polarity sensitive.
  5. **Secure Connections**: Ensure the metal pin holder is snug around the LED bulb for a tight connection.
  6. **Replace Cover**: Once the LED is installed and tested, replace the light cover.
  7. **Power On**: Power on the vehicle to illuminate the new LED lights.

Watch the installation demo video for a visual guide:

Video: Demonstration of LED light installation and various light colors (6000K White, 8000K Ice Blue, Warm White).

Visual examples of installed lights:

Comparison of original halogen bulb vs ABRIGHT LED bulb, showing brighter white light in car interior, followed by ice blue and warm white interior lighting examples.

Image: Detailed comparison of original halogen vs. ABRIGHT LED interior lights, showcasing white, ice blue, and warm white illumination in various car interior locations.

6. Feature Highlights

  • **Energy-efficient**: Consumes significantly less power than traditional halogen bulbs.
  • **Long Service Life**: Enjoy up to 50,000 hours of operational life, reducing the need for frequent replacements.
  • **Uniform Illumination**: Provides soft, flicker-free light output for enhanced visibility and comfort.
  • **Canbus Error Free**: Designed to prevent ECU errors in compatible vehicles.
  • **Easy Installation**: Plug and Play design for direct fit into original sockets.
  • **High Brightness**: 300% brighter than original halogen bulbs (white color).

7. Maintenance

  • **Cleaning**: Use a soft, dry cloth to gently wipe the LED bulbs if they become dusty. Avoid using harsh chemicals or abrasive materials.
  • **Environmental Conditions**: Avoid use in humid environments to prolong the lifespan of the bulbs.
  • **Disassembly**: Do not disassemble or modify the lamp arbitrarily. This can void the warranty and cause damage.

8. Troubleshooting

  • **Light does not turn on**:
    • Check whether the power connection is secure and normal.
    • Ensure the LED bulb is inserted with the correct polarity (try rotating 180 degrees).
  • **Low brightness**:
    • The LED strip may be improperly positioned. Adjust its placement within the light housing.
  • **Heat generation**:
    • Some heat generation is normal for LED lights and is no cause for concern.

9. User Tips

  • When replacing bulbs, consider using a plastic pry tool to avoid scratching your car's interior trim.
  • Test each LED bulb after installation before fully reassembling the light housing to ensure it functions correctly.
  • If you experience any flickering, double-check the connections to ensure they are tight and secure.

10. Warranty & Support

Your ABRIGHT Car Interior LED Lights come with a 2-year warranty.

For further assistance or support, please refer to the seller's contact information or the official ABRIGHT website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.