Introduction
Thank you for purchasing the ORIA F8830-2 LED Alarm Clock. This device combines a clear time display with practical features such as dual alarms, temperature monitoring, and customizable ambient lighting. Please read this manual carefully to ensure proper setup and operation.
Safety Information
- Keep the device away from water and high humidity environments.
- Avoid exposing the device to direct sunlight or extreme temperatures.
- Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.
- Use only the specified power adapter (USB 5V1A/5V2A) to prevent damage.
- Keep out of reach of children.
Package Contents
- Main unit (LED Alarm Clock) x1
- Power cable (Type-C to USB) x1
- Instruction manual x1
Product Overview & Illustrations
Familiarize yourself with the various parts and controls of your alarm clock:
- Time/Date Set Button: Used to enter and adjust time and date settings.
- Decrement (-) Button: Decreases values during settings, toggles temperature units, or adjusts brightness/color.
- Increment (+) Button: Increases values during settings, toggles temperature units, or adjusts brightness/color.
- Alarm 1 Set Button: Configures Alarm 1.
- Alarm 2 Set Button: Configures Alarm 2.
- Brightness Adjustment Button (DIMMER): Adjusts time display brightness.
- Ambient Light Brightness Adjustment Button: Adjusts ambient light brightness.
- Ambient Light Color Adjustment Button: Cycles through ambient light colors.
- Snooze Button: Activates snooze during an alarm, or turns off ambient light when held.
- Type-C Port (INPUT 5V): Main power input.
- Battery Compartment: Holds AAA batteries for memory backup.
- Temperature Sensor: Detects ambient temperature.
- Ventilation Ports: For heat dissipation.
Setup
- Battery Installation: Open the battery compartment on the back of the product. Insert 2 AAA batteries (not included) according to the polarity markings (+ and -). Close the battery cover. Note: Batteries are for saving function settings during power outages only; the clock must be plugged in to work.
- Power Connection: Plug the Type-C end of the power cable into the "INPUT 5V" port on the back of the clock. Connect the USB-A end of the cable to a USB 5V power source (e.g., a USB wall adapter, not included).
- Protective Film: Carefully peel off the protective film from the screen surface.
Important Notes:
- Use lithium batteries or high-quality alkaline batteries to prevent battery leakage and product damage.
- Power the device using a USB 5V1A/5V2A charger. Avoid using high-power chargers to prevent product damage.
Operating Instructions
Time and Date Settings
- In time display mode, press and hold the TIMESET button for three seconds to enter 12/24-hour format settings. Use the +/- buttons to switch between 12-hour and 24-hour formats.
- Press TIMESET again to enter year setting. The 'Year' field will flash; press +/- to adjust.
- Press TIMESET again to enter month setting. The 'Month' field will flash; press +/- to adjust.
- Press TIMESET again to enter date setting. The 'Day' field will flash; press +/- to adjust.
- Press TIMESET again to enter hour setting. The 'Hour' field will flash; press +/- to adjust.
- Press TIMESET again to enter minute setting. The 'Minute' field will flash; press +/- to adjust.
- Press TIMESET once more to complete settings and return to time display.
Note: When setting time in 12-hour mode, ensure AM/PM is correct. 24-hour mode does not display AM/PM.
Alarm Setup (Alarm 1 & Alarm 2)
Alarm 2 shares the same settings as Alarm 1.
- In time display mode, briefly press the ALARMSET1 button to toggle Alarm 1 on/off.
- Press and hold ALARMSET1 for 3 seconds to enter Alarm 1 settings. The hour field will flash; use +/- to adjust the hour.
- Press ALARMSET1 again to enter the minute field, which will flash; use +/- to adjust the minute.
- Press ALARMSET1 once more to enter alarm mode settings. Use +/- to select the alarm mode:
- 1-5 Weekday Mode: Sounds Monday through Friday.
- 1-7 Daily Mode: Sounds every day.
- 6-7 Weekend Mode: Sounds on weekends.
- Press ALARMSET1 once more to enter alarm volume settings. Use +/- to adjust the volume.
- Press ALARMSET1 once more to exit Alarm 1 settings and return to time display.
When an alarm is active, the corresponding alarm icon (1 or 2) illuminates on the screen. When the set alarm time is reached, it will ring for 2 minutes before automatically stopping or ceasing when any key is pressed.
Time Display Brightness Settings
In time display mode, briefly press the DIMMER button to adjust the time display brightness. There are five brightness levels available. The final setting turns off the display. Pressing any key will reactivate the time display.
Ambient Light Brightness Settings
Briefly press the Ambient Light Brightness Adjustment button to adjust the ambient light brightness (three levels: high/medium/low). The final setting turns off the ambient light. To turn off the ambient light directly from any brightness level, press and hold the button for 2 seconds.
Ambient Light Color Settings
With the ambient light active, briefly press the Ambient Light Color Adjustment button to cycle through color options. This includes 8 solid colors and 3 gradient colors, totaling 11 choices.
Night Mode
In time display mode, press and hold the DIMMER button for 3 seconds to enter Night Mode settings. Use the +/- buttons to toggle Night Mode on or off (ON = enabled, OFF = disabled). Press the DIMMER button once more to exit settings and return to time display.
When Night Mode is active, the time display brightness adjusts automatically:
- High brightness: 07:00-18:59
- Medium brightness: 19:00-23:59
- Low brightness: 00:00-06:59
Snooze Function
When an alarm is sounding, briefly press the SNOOZE button to stop the alarm and enter snooze mode (5-minute duration). The corresponding alarm icon will flash. Press any other button to cancel snooze.
Temperature Monitoring Function
In time display mode, briefly press the + button to toggle between Celsius (°C) and Fahrenheit (°F) temperature display.
- Monitoring Range: -9°C to 50°C (-16°F to 122°F)
- Out-of-Range Display: (Too Low) -19°C/16°F; (Too High) 50°C/122°F
- Accuracy: ±1.5°C
- Monitoring Interval: 10 seconds
Daylight Saving Time (DST)
In time display mode, press and hold the - button for 2 seconds to toggle DST on/off. When DST is active, "DST" illuminates, and the time display will be current time + 1 hour.
Second Mark Flash/Non-Flash
In time display mode, press and hold the + button for 5 seconds to toggle between flashing and non-flashing second marks.
Maintenance
- Clean the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the ventilation ports are free from dust and obstructions.
- If the clock will not be used for an extended period, remove the AAA batteries to prevent leakage.
Troubleshooting
Reset Procedure
In cases of system freeze, abnormal display, or unresponsive buttons, remove the AAA batteries from the back of the product. Reinsert the batteries to restore power, then reconfigure any relevant parameters (time, date, alarms).
Common Issues
- Display is blank: Ensure the clock is properly plugged into a working USB power source. Check the power cable connection.
- Alarm not sounding: Verify that the alarm is enabled (icon visible) and the volume is set to an audible level. Check alarm mode settings (weekday, daily, weekend).
- Incorrect time/date: Follow the "Time and Date Settings" instructions to re-adjust.
- Temperature reading seems off: Ensure the temperature sensor is not obstructed and the clock is in a stable environment.
Specifications
| Feature | Specification |
|---|---|
| Model Number | F8830-2 |
| Brand Name | ORIA |
| Type | Alarm Clocks |
| Screen Type | LED |
| Display Size | 6.5 inches (158mm length, 60mm height) |
| Dimensions (L x W x H) | 158mm x 38mm x 59mm |
| Weight | 145g (product only), 230g (packaged) |
| Motivity Type | Digital |
| Power Source | Plug-in (USB 5V1A/5V2A adapter recommended) |
| Battery Backup | 2 x AAA batteries (not included) for memory function only |
| Ambient Light | 11 Colors (8 solid, 3 gradient), 3 brightness levels |
| Time Format | 12/24-Hour selectable |
| Temperature Display | °C/°F selectable, Range: -9°C to 50°C (-16°F to 122°F), Accuracy: ±1.5°C |
| Alarms | Dual alarms with 3 volume levels and 5-minute snooze |
| Feature | LUMINOVA, Mood Light |
User Tips
- Brightness Expectations: While the clock offers 5 levels of display brightness and 3 levels for ambient light, some users may find the maximum brightness suitable for general use rather than extremely bright environments. Adjust according to your preference.
- Power Source: Always ensure the clock is plugged into a reliable USB power source for continuous operation. The AAA batteries are solely for retaining settings during power interruptions.
Warranty & Support
For detailed warranty information and further support, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download:
If you encounter any issues not covered in this manual, please contact the seller or manufacturer's customer support for assistance.