amagi 12V 450ml Electric Heating Car Kettle

Contents

amagi 12V 450ml Electric Heating Car Kettle User Manual

Model: 12V 450ml Electric Heating Car Kettle

I. Warning & Safety Information

  • Do not overload the kettle.
  • Always observe safe operating procedures.
  • Avoid dropping the kettle.
  • Keep out of reach of children.
  • Ensure the kettle is securely placed in a car cup holder during use to prevent spills.

II. Product Overview

The amagi 12V 450ml Electric Heating Car Kettle is designed for heating water, coffee, milk, and other beverages while traveling. It features a stainless steel body, a food-grade PP lid, and operates via a 12V DC car cigarette lighter power supply.

Car electric kettle in a car cup holder, highlighting 12V constant temperature heating and 450ml capacity.
Figure 1: Electric Heating Car Kettle in use, highlighting key features.

Components

Exploded view of the car kettle components: cigarette lighter plug, food-grade and environmental-friendly lid, and premium stainless steel body.
Figure 2: Main components of the Electric Heating Car Kettle.
  • Kettle Body: Made of premium stainless steel.
  • Lid: Food-grade and environmental-friendly material with a sealed design to prevent spills. Features a left and right slide switch for opening/closing.
  • Handle: Anti-slip design for secure grip.
  • Power Cable: Connects to the 12V DC car cigarette lighter socket.
  • Indicator Light: Shows the working status of the kettle.

III. Setup

  1. Inspect the Kettle: Before first use, inspect all parts of the kettle for any damage or integrity issues.
  2. Placement: Place the kettle securely in a standard car cup holder.
  3. Connect Power: Insert the cigarette lighter plug into your vehicle's 12V DC cigarette lighter socket. Ensure a firm connection.
Car kettle with 12V cigarette lighter plug.
Figure 3: Kettle with 12V cigarette lighter plug connection.
Close-up of the cigarette lighter socket on the car kettle.
Figure 4: Close-up of the power input socket on the kettle.

IV. Operating Instructions

  1. Fill the Kettle: Open the lid using the slide switch and fill the kettle with your desired liquid (water, coffee, milk, etc.). Do not exceed the 450ml capacity.
  2. Secure the Lid: Close the lid firmly and ensure the slide switch is in the closed position to prevent spills.
  3. Connect to Power: Plug the kettle into your car's 12V DC cigarette lighter socket.
  4. Heating: The indicator light will illuminate, signifying that the kettle is heating. The kettle will heat the liquid to approximately 60°C in about 15 minutes.
  5. Serving: Once heated, carefully unplug the kettle. Open the lid and pour your hot beverage.
Person pouring water into the car kettle placed in a car's cup holder.
Figure 5: Filling the kettle with water.
Diagram illustrating various uses of the car kettle: making tea, boiled eggs, coffee, and hot water.
Figure 6: Versatile uses of the car kettle for various hot beverages and food.
Close-up of the kettle lid, showing the left and right slide switch.
Figure 7: Kettle lid with slide switch for opening and closing.

V. Maintenance

The kettle is designed for easy cleaning.

  1. Cleaning: After each use, empty any remaining liquid. Wash the inside of the kettle and the lid with warm water and mild soap. Rinse thoroughly.
  2. Drying: Ensure all parts are completely dry before storing.
  3. Do Not Immerse: Do not immerse the entire kettle body, especially the electrical connection point, in water. Wipe the exterior with a damp cloth if needed.
Kettle disassembled into its main parts for cleaning: body, lid, and power cable.
Figure 8: Disassembled kettle for cleaning.

VI. Troubleshooting

ProblemPossible CauseSolution
Kettle not heating / Indicator light offLoose power connection
No power from car socket
Kettle malfunction
Ensure the cigarette lighter plug is fully inserted.
Check if the car's cigarette lighter socket is functioning (e.g., by testing with another device).
If the issue persists, contact customer support.
Liquid spilling during travelLid not properly sealed
Kettle not stable in cup holder
Ensure the lid is closed tightly and the slide switch is in the locked position.
Verify the kettle is securely placed in a compatible car cup holder.
Slow heatingAmbient temperature too low
Voltage fluctuation
Heating time may vary slightly based on external conditions.
Ensure your vehicle's electrical system is stable.

If the kettle is not functioning as expected and the above solutions do not resolve the issue, please contact after-sales service.

VII. Specifications

FeatureDetail
Brandamagi
Model12V 450ml Electric Heating Car Kettle
MaterialStainless Steel, Food Grade PP
ColorSilver
Power Mode12V DC (Car Cigarette Lighter)
Volume / Capacity450ml
Heating TemperatureApproximately 60°C
Heating TimeApproximately 15 minutes to reach 60°C
Dimensions (Height x Diameter)16cm x 8.7cm
Weight200g
FeaturesHigh temperature resistance, corrosion resistance, odorless, easy to clean, vacuum insulation, indicator light, anti-slip handle.
Dimensions of the car kettle (16cm height, 8.7cm diameter).
Figure 9: Kettle dimensions.

VIII. User Tips

  • For optimal heat retention, consider pre-heating the kettle with a small amount of hot water before adding your main beverage.
  • Always ensure the lid is securely fastened to prevent accidental spills, especially during vehicle movement.
  • Regularly check the car's cigarette lighter socket for any debris or loose connections to ensure efficient operation.
  • Avoid overfilling the kettle to prevent boiling over.

IX. Warranty & Support

For any product inquiries, troubleshooting assistance, or warranty claims, please contact the after-sales service of the brand amagi.

A detailed user manual in PDF format is available for further reference: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.