X5PRO-AI Smart Skin Image Analyzer User Manual

1. Product Introduction

Thank you for choosing the X5PRO-AI Smart Skin Image Analyzer. This product integrates a high-precision multispectral imaging system with deep learning AI algorithms, capable of performing multi-dimensional analysis of skin tissues. It supports detection of various physiological indicators, pathological characteristics, and accessory organ evaluations.

The X5PRO-AI is a professional skin tester utilizing ten-spectrum imaging technology to comprehensively analyze 20 types of skin problems, including moisture, pores, pigmentation, wrinkles, acne, and sensitivity. It provides personalized analysis reports and accurately recommends products and projects, making it an essential sales tool for beauty institutes.

Figure 1: X5PRO-AI Smart Skin Image Analyzer in use, highlighting its core features and certifications.

Key Features:

• AI Diagnosis: Utilizes advanced AI algorithms for accurate skin analysis.
• Overall Inspection: Provides a comprehensive evaluation of skin condition.
• Professional Report: Generates detailed, personalized skin analysis reports.
• Exclusive Scheme: Offers tailored recommendations for skin care.
• High Definition Camera: Equipped with industrial-grade imported HD pixels for clear imaging.
• 10 Spectral Imaging Technology: Captures detailed images under various light conditions for in-depth analysis.
• Trispectral Microimaging Analysis: Presents skin details using RGB white light, polarized light, and UV light.
• Cloud Storage: All data is analyzed and stored in the cloud, avoiding local memory occupation and data loss.
• Centralized Management System: Monitors multi-store operations and client profiles in real-time.

2. Setup Instructions

2.1. Product Components

Figure 2: Diagram of the Host Machine and Display Screen components.

Host Machine:

• Power Switch
• USB Power Interface
• Power Cord Socket
• USB Data Interface

Display Screen:

• USB Data Interface
• HDMI Data Interface
• Network Cable Interface
• Power Interface
• Switch Reset Key

2.2. Accessories List

2.3. Installation Procedures

1. Install the Tablet Stand Base: Place the tablet stand into the slot of the base, then rotate the locking ring of the base 360 degrees to secure it.
2. Install the Stand and Tablet: Attach the assembled base stand to the back of the tablet and tighten the four screws sequentially.
3. Install Tablet Accessories: Connect the tablet's power cable, USB connection cable, and the USB interface of the micro-hygrometer to the bottom of the tablet stand. The tablet can be rotated 90 degrees during use.
4. Install Host Hardware: Insert the host's power cable and the other end of the USB cable into the back of the host.
5. Power On: Connect the host's power cable and the tablet charger to a live electrical outlet. Press the power button at the bottom of the host. The indicator light turning on signifies the device is powered. To turn off, press the power button again or unplug the power cable.
6. Tablet Power Switch: Swipe up from the bottom of any screen to find the power button. Tap it, then select "Shut Down" to turn off the device.

3. Operating Instructions

3.1. Application Usage

1. Network Connection: After powering on, a network connection message will appear automatically. Click "Confirm" to choose the appropriate network, enter the password, and establish the connection. Once connected, click the return button in the top right to go back to the main interface.
2. Registration and Account Login: For first-time connection, click the registration button to access the registration page. Fill in the required fields: username, phone number, verification code, password, and password confirmation. After completing the form, click "Register" to be redirected to the login interface and log in. Existing users can log in directly. (Note: Registered accounts are management accounts by default, allowing backend access for product entry, device management, and personnel management.)

3.2. Skin Measurement Photography

When accessing the camera page, click the top right to select the face area to photograph (left face, right face, front face). Follow voice prompts for correct positioning, close your eyes, then click the capture button on the handle or screen to take the photo. Once all required facial views are photographed, submit and upload for analysis.

3.3. Report Sharing and Printing

From the full report page, click the share button in the top right to choose between obtaining the report via a QR code or sending it by email. You can also select the print button to print the report.

3.4. Humidity Detection

To access the humidity analysis page, click "Start Detection" from the skin analysis page. Follow instructions to place the hygrometer flat against the corresponding facial skin area. Click the hygrometer capture button to get the humidity value. After detecting all four zones, click "Submit" to access the humidity analysis page.

3.5. Microscopic / Scalp Examination

Click "Microscopic / Scalp Examination" to enter the capture mode. Select the area to photograph, then place the portable microscope flat against the desired area. Click the capture button on the screen or handle. Wait for all three light sources to complete the capture, then move to the next area.

3.6. Case Recording

On the imaging and spectral analysis page, clicking the icon on the right allows you to save the current image as a case. You can then select the department, test item, case category, treatment stage, and add remarks.

4. Maintenance and Care

Important Warnings:

• Maintenance work must be performed by qualified after-sales personnel or repair technicians familiar with the instrument.
• Before maintenance, disconnect power and unplug the power cord. Performing maintenance on live equipment can cause personal injury and damage.
• During cleaning, prevent cleaning solutions from entering the instrument to avoid electrical leakage or corrosion of the USB port.

General Care Guidelines:

1. Avoid harmful gases and corrosive liquids entering the instrument. Water is strictly prohibited in the main unit to prevent insulation performance degradation, which could lead to electrical leakage and personal injury.
2. The entire device should be used in a dry, well-ventilated area and covered with a cloth when not in use.
3. The instrument is sensitive to impact due to its precision electronic circuits. Do not attempt to open it without authorization.
4. Keep the instrument clean at all times. Use a soft, semi-dry cotton cloth for cleaning. Clean with 75% alcohol; organic solvents like acetone are prohibited. Ensure cleaning solutions do not penetrate the instrument. High-temperature sterilization should be avoided.

5. Troubleshooting (Common Questions & Answers)

6. Specifications

Product Properties:

• Brand Name: MYOSLIM
• Material: Plastic
• Origin: Mainland China
• Certification: CE
• Type: Skin Analyzer
• Function: Facial Clean, Acne analysis, Skin Wrinkle analysis, Pigmentation analysis, Detect Skin Moisture, Assess sebum levels, Evaluate pore condition, Evaluate skin tone evenness, Evaluate skin elasticity
• Screen Size: 15.6 inches / 21.5 inches
• Language: Multi Language Support
• Is Batteries Included: No
• High-concerned chemical: None

Electrical Parameters:

• Input: 100~240VAC 50/60Hz
• Frequency: 50/60Hz
• Impedance: 50Ω
• Output Power: 0~30W
• Rated Current: 1A
• Power Supply Voltage: 100~240VAC

The power cord used for this instrument complies with national safety standards. It is imperative to use wall outlets or power strips equipped with standardized and nationally certified wires to ensure operational safety.

Package Dimensions & Weight:

• Length: 62 cm
• Width: 53 cm
• Height: 53 cm
• Weight: 15.0 kg

7. Warranty and Support

Warranty Coverage:

The host machine comes with a one-year free warranty and long-term after-sales repair services.

• During the warranty period, users are entitled to unified after-sales service and a parts replacement policy under warranty.
• For maintenance, a valid warranty certificate for the machine purchase must be presented. The warranty period starts from the instrument's shipping date from the factory.
• If the same component and fault phenomenon reappear after repair, free maintenance is provided within 90 days.
• Repaired or replaced parts during the warranty period belong to the after-sales maintenance network; parts repaired or replaced after the warranty period belong to the user.
• Additional services and gifts not configured by the factory by each regional distributor are covered by the distributor themselves.

Items Not Covered by Warranty:

• Accessories and free gifts of the X5PRO-AI Smart Skin Image Analyzer.
• Damage caused by improper handling, use, maintenance, or storage by the user.
• Damage caused by using a voltage below 100 volts or above 240 volts.
• Damage resulting from use, maintenance, or upkeep not in accordance with the instructions in the product manual.
• Disassembly or repair by personnel not affiliated with the after-sales service.
• Unauthorized use of accessories or products provided by non-affiliated after-sales personnel, resulting in damage to the instrument or other problems.
• Damage caused by force majeure (such as lightning, fire, earthquake, flood, and other natural disasters).
• The product has exceeded its warranty period.
• The model or number on the invoice or warranty card does not match the actual product.

In the above cases, after-sales service personnel will perform paid repairs, including repair costs, parts costs, and on-site service fees. Specific fee standards comply with authorized provisions by competent services.

Please fill out the warranty card immediately after purchasing the product. Keep the warranty card safe and present valid proof of purchase during repair.

8. User Tips

• Ensure the device is well-packaged upon arrival. Check for thick foam wrapping around the host and screen, and that the charging line is separately packed.
• The device operates quietly and maintains a cool temperature even after multiple scans.
• For accurate results, ensure the device is properly calibrated and positioned according to the instructions.
• Regularly review the generated reports, which are designed to be easy to understand, for insights into skin moisture and pigmentation.

9. Statement of Compliance

⚠️ This product is not intended to diagnose, mitigate, treat, cure or prevent any disease.