1. Introduction
Thank you for purchasing the FEELWORLD T10 10.1-inch aluminium field monitor. This manual provides detailed instructions for the safe and efficient use of your device. Please read it carefully before operation.
1.1 Safety Precautions
- Avoid heavy impact or dropping the product.
- The screen is made of glass; handle with care to prevent breakage and injury.
- Keep the product away from heat sources and direct sunlight to prevent LCD screen damage.
- Do not attempt to disassemble or repair the unit yourself.
- To maintain the LCD screen:
- Do not hit the screen with hard objects.
- Do not wipe the screen forcefully.
- Do not use chemical solutions or spray detergents on the screen.
- Do not write or stick anything directly on the screen.
- Wipe gently with a clean, soft cloth, ensuring no water is left on the screen.
1.2 Key Features
- 10.1-inch Full HD IPS screen for detailed viewing.
- Solid and durable aluminium housing.
- Touch screen and intuitive button operation.
- Sony F970 external install and power kit design for external equipment.
- Supports 3D LUT Log to REC.709 and user 3D LUT upload (up to 32).
- 4-group user switching for quick menu access.
- Moveable Waveform, Vector, Histogram, and audio meter.
- HDR monitoring support.
- Stereo Earphone output.
2. Setup
2.1 Package Contents
Please check the box for the following items:

Figure 2.1: FEELWORLD T10 Monitor Packaging and Included Accessories. Contents include the monitor, Micro HDMI Cable, HDMI Cable, NP-F Battery Plate, U-shape Bracket, Sun-shade, and User Manual.
- FEELWORLD T10 Monitor
- Micro HDMI Cable
- HDMI Cable
- NP-F Battery Plate (Default to mount on device)
- U-shape Bracket
- Sun-shade
- User Manual (PDF)
2.2 Monitor Overview
Familiarize yourself with the monitor's various ports and controls.

Figure 2.2: Various views of the FEELWORLD T10 monitor, showing front, back, top, bottom, and side panels with their respective ports and controls.
2.2.1 Front Panel
The front panel features the 10.1-inch display.
2.2.2 Rear Panel

Figure 2.3: Rear panel of the FEELWORLD T10 monitor, showing the NP-F Battery Plate, Battery Lock, VESA Mount Position, and F970 External Kit mounting points.
- NP-F Battery Slot: For NP-F series batteries.
- Battery Lock: Locks the battery in place. Press before removing the battery.
- VESA Mount Position: 75x75mm.
- F970 External Kit: For mounting and powering external equipment (e.g., wireless transmitters, LED lights).
2.2.3 Top Panel

Figure 2.4: Top panel of the FEELWORLD T10 monitor, showing function buttons and 1/4 screw thread.
- F1/Λ, F2/V, F3|EXIT: Customizable function buttons.
- MENU: Accesses the OSD main menu.
- Power Button: Long press to power on/off; short press to toggle touch function.
- 1/4 Screw Thread: For mounting to hot shoe mounts or tripods.
- Indicator: Red (power connected), Yellow (monitor on), Green (signal connected).
2.2.4 Bottom Panel

Figure 2.5: Bottom panel of the FEELWORLD T10 monitor, showing DC IN, USB, HDMI IN, HDMI OUT ports, and 1/4 screw thread.
- DC IN 12V: DC power input (polarity: center positive).
- 3.5mm Earphone Port: Audio output.
- USB: For firmware updates and LUT file import.
- HDMI IN: V2.0 HDMI signal input, up to 4K@60Hz.
- HDMI OUT: V2.0 HDMI signal output, up to 4K@60Hz.
- 1/4 Screw Thread: For mounting.
2.2.5 Side Panels
Both side panels feature 1/4 screw threads for additional mounting options.
2.3 Power Supply
- Battery Power: The monitor is equipped with an F970 battery plate, compatible with Sony F970 series batteries (F970, F960, F950, F930, F770, F750, F730, F570, F550, F530). A V-mount battery plate is optional.
- DC Power: The left side of the monitor has a DC 12V input port (5.5mm outer, 2.1mm inner), supporting 7-24V wide voltage. A DC power adapter (not included) is required.
2.4 Mounting the Monitor
2.4.1 1/4-20 Screw Thread Points
The monitor has four 1/4-20 thread points (top, bottom, right side, and back center) for easy connection to hot shoe mounts or tripods.
2.4.2 U-shape Bracket
The included U-shape bracket can be attached for tabletop use or specific mounting configurations.
2.5 Sony F970 External Install and Power Kit
The F970 external kit allows you to mount and power external equipment (e.g., wireless transmitters, LED lights, video converters) directly from the monitor using a Sony F970 battery.
2.5.1 Adjusting the Kit
The kit has two cross grooves, allowing adjustment of the external device's position by loosening 2 screws (up/down, left/right). It can also be installed upside down.
2.5.2 Removing the Kit
Note: Before disassembling, ensure the monitor is off and the battery/power adapter is removed.
- Loosen the 2 screws.
- Use both hands to move the kit up.
- Move the round holes to align with the corresponding 2 screws.
- Gently lift the kit upwards and carefully disconnect the 2P power cord.
- Remove the 2 screws.
3. Operating Instructions
3.1 Powering On/Off
After connecting power, the indicator light will be red. The monitor turns on automatically, and the indicator turns yellow. When an HDMI signal is input, it turns green.
- Power On: The monitor usually powers on automatically when connected to power. If not, short press the power button.
- Power Off: Press the power button to shut down. If power is still connected, the monitor will enter standby.
3.2 Touch Screen Operation
Ensure the touch function is enabled (short press power button to toggle).
- Main Menu: Double-click on the screen to open the main menu (left side). Click on menu items to display sub-menus. Click to select/set options. Click outside the menu to exit.
- Shortcut Menu: When the main menu is not displayed, swipe up from the bottom of the screen to open the shortcut menu. Swipe left/right to select functions and click to toggle them on/off. (Note: Detailed settings are only available in the main menu).
- Quick Adjustments: When no menu is displayed, swipe on the left half of the screen to adjust backlight brightness, and swipe on the right half to adjust volume.
3.3 Button Menu Operation
- Press the MENU button to enter the OSD main menu.
- Use F1/Λ or F2/V to navigate through first-level items.
- Press MENU to confirm and enter a secondary menu.
- Use F1/Λ or F2/V to select items or adjust parameters.
- Press MENU to confirm selections.
- Press F3|EXIT to return or exit the menu.
3.4 Menu Functions
The monitor offers a comprehensive suite of monitoring tools:
3.4.1 Assist Functions
- All Waves: Displays waveform, vector, histogram, and embedded audio simultaneously.
- Waveform (RGB, YUV, Y): Graphical display of signal levels. Adjustable position (X: 0-100, Y: 0-100) and transparency (Off, 25%, 50%, 75%).
- Vector: Shows color saturation and hue. Adjustable position (X: 0-100, Y: 0-100).
- Histogram (RGB1, RGB2, Y): Displays brightness distribution. Adjustable position (X: 0-100, Y: 0-100).
- Focus Assist (Red, Green, Blue): Highlights in-focus areas. Adjustable peaking level (1-10).
- Embedded Audio: Displays audio level meters. Adjustable position (X: 0-100, Y: 0-100).
- Over Exposure: Highlights overexposed areas with a striped pattern. Adjustable IRE (10-100).
- Check Field (Red, Green, Blue, Mono): Adjusts hue and saturation for quick color checks.
- False Colors (Normal, ARRI): Displays exposure levels using a color map.
3.4.2 Marker Functions
- Grid: Divides the screen into grids (2x2 to 9x9, custom). Adjustable color.
- Safe Frames: Displays safety markers (80%, 85%, 90%, 93%, 96%, 2.35:1). Adjustable color.
- Center Marker: Displays a crosshair in the center. Adjustable color.
- Ratio Marker: Displays various aspect ratio markers (4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1). Adjustable color and modification (0-5).
3.4.3 Image Functions
- Scan Mode (Under Scan, Over Scan): Adjusts how the image fits the screen.
- Aspect Ratio: Selects display aspect ratio (Auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Full Screen).
- Anamorphic Mode (1.33X, 1.6X, 2.0X, 2.0X MAG, User): Desqueezes anamorphic footage. User-customizable (1.20X-2.00X).
- Image Flip (H Flip, V Flip, H_V Flip): Flips the image horizontally, vertically, or both.
- Zoom Mode (2X, 4X, 9X, 16X, User): Magnifies parts of the image. User-customizable (100%-200%).
- Image Freeze: Freezes the current frame.
- Pixel to Pixel (P2P): Displays the image at 1:1 pixel ratio without scaling.
3.4.4 User Options
- LUT (SLOG2, SLOG3, LOGC, VLOG): Applies 3D LUTs for color grading preview. Supports 4 built-in LUTs and up to 32 user-uploaded LUTs.
- HDR (HLG1, HLG2, HLG3): Enables High Dynamic Range monitoring.
- Display Adjustment: Adjusts Backlight, Brightness, Contrast, Saturation, and Tint (0-100).
- Color Temp. (5600K, 6500K, 9300K, User): Adjusts color temperature. User mode allows R, G, B adjustment (0-255).
- Shortcut Key: Assigns functions to F1, F2, F3 buttons.
3.4.5 System Settings
- User Switch (1-4): Save and recall up to 4 custom menu configurations.
- Language: Select display language.
- OSD Time: Set On-Screen Display duration (Off, 15s, 30s, 45s).
- OSD Trans: Adjust OSD transparency (Off, 25%, 50%, 75%).
- No Signal: Set background color when no signal is present.
- Volume: Adjust speaker volume (0-100).
- Reset: Restore all settings to factory defaults.
- Firmware Version: Displays current firmware version.
- Firmware Update: Initiates firmware update process.
3.5 How to Load LUT
The monitor supports up to 32 LUT files (.cube format, max 7.9Mb per file, sizes 16, 17, 32, 33, 64, 65). LUT filenames must be English or Arabic numerals.
- Format your USB flash drive to FAT32.
- Copy your LUT files to the USB drive.
- Insert the USB drive into the monitor's USB port.
- Go to Main Menu > LUT > Lut Import > Confirm.
- The monitor will detect and load valid LUT files. A message like "complete[n]" will appear, where [n] is the number of loaded LUTs.
3.5.1 Clearing Imported LUTs
Insert an empty USB flash drive, then go to Main Menu > LUT > Lut Import > Confirm. The imported LUTs will be cleared.
4. Maintenance
4.1 Cleaning the Monitor
As mentioned in the safety precautions, use a clean, soft cloth to gently wipe the screen and body. Do not use chemical cleaners or excessive moisture.
4.2 Battery Care
If you do not use the monitor for an extended period, please remove the battery to prevent discharge or damage.
4.3 Firmware Updates
Periodically check the manufacturer's website for new firmware versions to ensure optimal performance and access to new features. Follow the firmware update instructions carefully (Section 3.5 for USB drive preparation).
5. Troubleshooting
5.1 Only Black and White or Monochrome Picture
- Check saturation, brightness, and contrast adjustments in the menu.
- Check if "Check Field" is set to black, white, or monochrome.
5.2 No Image After Power On
- Verify that the signal cable is connected correctly and securely.
- Ensure you are using the standard power adapter. If using battery power, check if the battery is fully charged.
5.3 Earphone No Sound
Check if the Volume control is open in the menu. Press the volume button and try to increase the volume.
5.4 Other Issues
If you encounter other problems, please contact your dealer or FEELWORLD customer support.
6. Specifications
| Parameter | Value |
|---|---|
| Panel Size | 10.1-inch (touch) |
| Resolution | 1920 x 1200 pixels |
| Dot Pitch | 0.1128 (H) x 0.1128 (W) mm |
| Aspect Ratio | 16:10 |
| Brightness | 500cd/m² |
| Contrast | 1500:1 |
| Viewing Angle | 80°/80°(L/R) 80°/80°(U/D) |
| Backlight | LED |
| Adjustable Backlight | Yes |
| Input | HDMI 2.0 |
| Output | HDMI 2.0 |
| Audio | 3.5mm stereo headphone jack |
| Power In | DC IN 12V |
| HDMI Input/Output Support Format | 480i/576i/480p/576p 720p (60/59.94/50/30/29.97/25/24/23.98) 1080i (60/59.94/50) 1080p (60/59.94/50/30/29.97/25/24/23.98) 3840x2160p (60/50/30/29.97/25/24/23.98) 4096x2160p (60/50/30/29.97/25/24/23.98) |
| Power Input Voltage | 7~24V |
| Power Consumption | ≤10W |
| Unit Size (mm) | 251.91*161.91*23.91 (mm) |
| Unit Weight | 639g |
| Mount Points | 1/4-20 thread points (left, right, top, bottom) |
| Working Temperature | -10°C ~ 60°C |
| Storage Temperature | -30°C ~ 70°C |
7. User Tips
- Battery Life: Always carry a spare NP-F battery, especially for long shoots, as external power consumption can vary.
- Sunlight Visibility: Utilize the included sun-shade for better visibility in bright outdoor conditions.
- Custom Shortcuts: Take advantage of the customizable F1-F3 buttons to quickly access your most used monitoring tools.
- LUT Management: Organize your LUT files on a USB drive for easy import and ensure they are named clearly for quick selection.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact your authorized FEELWORLD dealer. You can also visit the official FEELWORLD website for the latest support resources and contact information.
Specifications are subject to change without prior notice as product features and performance are continuously improved.