GTMEDIA V8 Finder PRO 2

Contents

GTMEDIA V8 Finder PRO 2 User Manual

Digital Satellite Signal Finder

1. Important Safety Instructions

Thank you for choosing the GTMEDIA V8 Finder PRO 2. For safe and proper operation, please observe the following instructions:

  • Read this user manual completely before operating the device.
  • Ensure the satellite dish is installed with the correct direction and angle. Contact a local dealer if the dish is not functioning correctly.
  • If the unit is moved from a cold to a hot environment, allow 1-2 hours for it to acclimatize before powering on to prevent issues.
  • Operate the meter in a clean, well-ventilated area.
  • Do not cover the meter or place it near heat-emitting devices.
  • Clean the device casing with a soft cloth lightly dampened with cleaning liquid.
  • Do not remove the device cover.
  • Avoid exposing the unit to extreme heat, cold, or humid conditions.
  • Prevent liquids or foreign materials from entering the unit.

Connection Diagram

The following diagram illustrates typical connections for the V8 Finder PRO 2:

Connection diagram for GTMEDIA V8 Finder PRO 2 showing connections to TV, antenna, and power.

Description: This image shows the V8 Finder PRO 2 connected to a television via HD output, an antenna, and an AC/DC adapter for power. It also highlights AV input and DC12V 500mA output capabilities.

2. Product Overview & Components

The GTMEDIA V8 Finder PRO 2 is a versatile handheld combo meter designed for digital satellite, terrestrial, and cable signal installation and verification.

Key Features:

  • 4.3 Inch High Definition TFT LCD Screen
  • Fully DVB-S2X/S2/S/T2/T/C/ATSC-C, MPEG-2/MPEG-4 compliant
  • Support H.264/H.265(10 Bit) Hardware decoding
  • Digital measuring device for signal strength and quality
  • Spectrum analyzer & Constellation analyzer
  • Supports DISEQC 1.0/1.1/1.2, Unicable, 0/22kHz Tone
  • Integrated Speaker
  • Support AV in/out, HDMI out, AHD camera input
  • 7.4V/4000mAh Li-ion Battery with fast charging
  • Software upgrade via USB port
  • Support 2.4G USB WiFi for YouTube

Device Layout and Ports

GTMEDIA V8 Finder PRO 2 front view with screen and buttons.

Description: This image displays the front of the GTMEDIA V8 Finder PRO 2, showing its 4.3-inch LCD screen, navigation buttons, numeric keypad, and function keys. It also highlights its multi-standard compatibility (DVB-S2, DVB-T2, DVB-C, AHD, H.265).

GTMEDIA V8 Finder PRO 2 showing multiple signal decoding capabilities.

Description: The device is shown next to a TV and a satellite dish, illustrating its capability for multiple signal decoding including DVB-S/S2/S2X, DVB-T/T2/C, VCM/ACM/Multi-stream/T2MI, PLP, MPEG2, MPEG4, H.264/MPEG4 AVC, and H.265/HEVC(10bit).

Button and Port Descriptions

No.DescriptionFunction
1LCD ScreenVideo display
2Battery IndicatorBattery level display (5 levels)
3PowerPower indicator light
422KHz22kHz indicator light
513V/18VVertical/Horizontal polarization voltage output light
6LockSignal Lock indicator light
7ChargerCharger indicator light (Red: Charging, Blue: Full)
8DVBDVB mode switch for LCD
9AHDAHD IN mode switch for LCD
10AV INAV IN mode switch for LCD
11LCDTurn on and off the screen backlight
12Red & RECRed Key & Enter record function
13Green & SUBTGreen key & subtitle interface
14Yellow & TEXTYellow key & Teletext interface
15Blue & EPGBlue key & EPG interface
16MENUShow the main menu or jump back to previous menu
17EXITEscape from current menu and save settings
18LOOPLoop Search interface
19SPECSpectrum interface
20Navigation KeyVolume control, cursor movement, channel change, confirm
210-9Number key to select channels or enter programming
22TV/RTV and radio switch
23AUDIOAudio interface
24SATDisplay the satellite list
25INFOInfo interface
26MUTEEnable or disable the audio output
27LNB INConnect to satellite antenna cable
28ANT INConnect to antenna of DVB-T/T2/C signal
29AHDConnect the analog AHD cable to the LCD screen
30USBConnect to USB memory or USB WIFI
31PDConnect to adaptor input (9V/2A)
32Power SwitchTurn on/off meter
33HD OUTUse HD cable to connect for TV
34AV OUTConnect to AV port for TV
35AV INConnect to AV port for meter
36SpeakerSpeaker integrated

3. Setup

3.1 Initial Power On and Charging

  1. Connect the provided 9V/2A power adapter to the PD port (31) on the device and plug it into a power outlet.
  2. The Charger indicator light (7) will turn red during charging and blue when fully charged.
  3. Press the Power Switch (32) to turn on the device. The GTMEDIA logo will appear on the LCD screen (1).

3.2 System Settings

Before proceeding with signal finding, it is recommended to configure basic system settings:

  1. From the Main Menu, navigate to System Setting and press OK.
  2. Language: Select your preferred language.
  3. Local Longitude/Latitude: Enter your geographical coordinates for accurate satellite angle calculations.
  4. TV System: Set to Auto, PAL, or NTSC according to your region.
  5. Video Resolution: Adjust display resolution (e.g., 1080i, 720p).
  6. AV Out: Enable or disable AV output.
  7. Beeper: Turn on/off the beep tone for signal lock alarms.
  8. WiFi Manager: Configure 2.4G WiFi connections (requires a compatible USB WiFi dongle).

3.3 Connecting Antennas and Cables

  • Satellite (DVB-S/S2/S2X): Connect your satellite dish cable to the LNB IN port (27).
  • Terrestrial (DVB-T/T2) / Cable (DVB-C): Connect your terrestrial antenna or cable TV signal to the ANT IN port (28).
  • AHD Camera: Connect an AHD camera to the AHD port (29) to view its feed on the LCD screen.

4. Operating Instructions

4.1 Main Menu Navigation

Press the MENU button (16) to display the Main Menu. Use the Navigation Keys (20) to select an option and press OK to enter.

GTMEDIA V8 Finder PRO 2 main menu screen.

Description: The main menu of the V8 Finder PRO 2 is shown, with icons for Satellite, Terrestrial, Cable, Spectrum, Loop Search, Calculate, Other, and System Setting.

4.2 Satellite Signal Finding (DVB-S/S2/S2X)

  1. From the Main Menu, select Satellite and press OK.
  2. Use the Navigation Keys to select the desired satellite from the list and press OK.
  3. Configure the following parameters:
    • LNB Freq: Select the correct LNB frequency.
    • Frequency Channel: Select the Transponder (TP) you want to measure.
    • Frequency / Symbol Rate: Input the values using the numeric keypad (21).
    • Polarity: Set to Vertical (V) or Horizontal (H).
    • DiSEqC1.0 / DiSEqC1.1: Set the port number if using a DiSEqC switch.
    • 22K: Turn on or off the 22 kHz tone.
    • Motor Setup: If using DiSEqC1.2 or USALS, configure motor settings.
  4. Adjust your satellite dish until the Strength and Quality bars show a high percentage. The device will emit a sound when the signal is locked.
  5. Press the Yellow key (14) for TP Search to scan for channels on the current transponder.
  6. Press the Blue key (15) for Blind Scan to search for all channels on the selected satellite.

4.3 Terrestrial Signal Finding (DVB-T/T2)

  1. From the Main Menu, select Terrestrial and press OK.
  2. Configure the following parameters:
    • Country: Select your country.
    • Frequency Channel: Select the channel number.
    • Frequency (KHz): Input the frequency using the numeric keypad.
    • Bandwidth: Select 6M, 7M, or 8M.
    • Antenna Power: Turn antenna power on/off if your antenna requires it.
    • LCN: Turn Logical Channel Numbering on/off.
  3. Adjust your terrestrial antenna until the Strength and Quality bars show a high percentage.
  4. Press the Blue key (15) for Scan to search for channels on the current frequency.
  5. Press the Yellow key (14) for Auto Search to scan for all available channels.

4.4 Cable Signal Finding (DVB-C)

  1. From the Main Menu, select Cable and press OK.
  2. Configure the following parameters:
    • Frequency: Input the cable frequency.
    • Symbol Rate: Input the symbol rate.
    • Modulation: Select the correct modulation (e.g., QAM64, QAM256).
  3. Adjust your cable connection until the Strength and Quality bars show a high percentage.
  4. Press the Blue key (15) for Scan to search for channels on the current frequency.
  5. Press the Yellow key (14) for Range Search to perform a scan within a specified frequency range.

4.5 Spectrum Analyzer

From the Main Menu, select Spectrum and press OK to view the signal spectrum for Satellite, Terrestrial, or Cable signals. This helps in identifying interference and optimizing signal quality.

4.6 Calculate Angle

From the Main Menu, select Calculate and press OK. If your local longitude and latitude are set in System Settings, the device will display the LNB angle, orientation, and elevation for various satellites, aiding in dish alignment.

4.7 Other Functions (Media Player, USB Upgrade, etc.)

From the Main Menu, select Other and press OK to access additional features:

  • Media Player: Play media files from a USB drive connected to the USB port (30).
  • USB Upgrade: Update the device firmware via a USB drive. (See Maintenance section for details).
  • Factory Setting: Reset the device to factory defaults. (Warning: This will erase all user settings and channel data).
  • Information: View device information.

5. Maintenance

5.1 Cleaning

Use a soft, dry cloth to clean the device. For stubborn dirt, slightly dampen the cloth with a mild cleaning solution. Do not use harsh chemicals or abrasive cleaners.

5.2 Battery Care

  • Charge the device fully before first use.
  • Avoid completely discharging the battery frequently to prolong its lifespan.
  • If the device will not be used for an extended period, charge it to about 50% and store it in a cool, dry place.

5.3 Software Upgrade

Firmware updates can improve performance and add new features. Always download official firmware from the GTMEDIA website.

  1. Download the latest firmware file to the root directory of a USB flash drive.
  2. Connect the USB flash drive to the USB port (30) of the device.
  3. From the Main Menu, navigate to Other > USB Upgrade and press OK.
  4. Select the firmware file and follow the on-screen instructions.
  5. WARNING: Do not power off or remove the USB drive during the upgrade process, as this may damage the device.

6. Troubleshooting

  • Device does not power on: Ensure the battery is charged or the power adapter is correctly connected. Check the power switch.
  • No signal detected: Verify all cable connections (LNB IN, ANT IN). Check antenna/dish alignment. Ensure correct LNB frequency, transponder settings, and polarization.
  • Poor signal quality: Adjust antenna/dish fine-tuning. Check for obstructions. Ensure cables are not damaged.
  • Screen is blank or frozen: Try restarting the device. If the issue persists, perform a factory reset (note: this will erase all settings).
  • USB functions not working: Ensure the USB drive is formatted correctly (FAT32 is recommended) and the files are compatible.

7. Specifications

FeatureSpecification
Display4.3 Inch High Definition TFT LCD Screen
Signal DecodingDVB-S2X/S2/S/T2/T/C/ATSC-C, MPEG-2/4 H.264/H.265 (10 bit)
Battery7.4V/4000mAh Li-ion Battery, +9V Fast Charging
ConnectivityHDMI Out, AV In/Out, USB, 2.4G WiFi Support, AHD Camera Input
Signal AnalysisSpectrum Analyzer, Constellation Analyzer, Loop Search
DiSEqC SupportDiSEqC 1.0/1.1/1.2, USALS, Unicable, 0/22kHz Tone
AudioIntegrated Speaker
Other FeaturesCompass Function, Real-time Power Display, LNB Short Protect
Dimensions (L x W x H)28 cm x 21 cm x 6 cm
Weight0.89 kg

8. User Tips

  • Always ensure a clear line of sight for satellite dishes to avoid signal obstruction.
  • Fully charge the device before heading out for installations to maximize operational time.
  • Regularly check the GTMEDIA official website for firmware updates to ensure optimal performance and access to the latest features.
  • When using the AHD camera input, ensure the camera is compatible with the AHD standard for proper display.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official GTMEDIA website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.

© 2024 GTMEDIA. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.