SUNON PF80251B2-0000-S99

Contents

SUNON PF80251B2-0000-S99 Server Fan User Manual

Model: PF80251B2-0000-S99

1. Introduction

This manual provides essential information for the safe and efficient use of your SUNON PF80251B2-0000-S99 Server Fan. Please read it thoroughly before installation and operation.

1.1 Product Basic Information

  • Product Name: SUNON Construction Approval PF80251B2-0000-S99 12V 3.4W 8025 8CM PWM Temperature Controlled Fan
  • Model/SKU: PF80251B2-0000-S99
  • Brand: SUNON
  • Type: Server Fan
  • Main Parameters: DC 12V, 3.4W, 80x80x25mm (8025)
  • High-concerned chemical: None

1.2 Scope of Application

This product is suitable for daily household and personal use, specifically designed for cooling server environments. It is not intended for commercial, industrial, medical, or other special purposes unless explicitly specified.

2. Package Contents

Please verify that all items are present and in good condition upon opening the package.

  • SUNON PF80251B2-0000-S99 Server Fan × 1
  • User Manual (this document) × 1

3. Safety Warnings

WARNING:

  • Read all safety instructions carefully before use to avoid personal injury or product damage.
  • Keep the product away from open flames, high temperatures, humid environments, and water sources to prevent short circuits, fires, or electric shocks.
  • Do not disassemble, modify, repair, or cut the product and its accessories without permission, as this will void the warranty.
  • Keep small parts of the product away from children under 3 years old to prevent choking hazards.
  • Do not place the product in a location where it is prone to falling or being squeezed by heavy objects.
  • Unplug the power supply when cleaning, performing maintenance, or when the product is not in use for an extended period.
  • If the product is damaged, abnormal, or faulty, stop using it immediately and contact after-sales service.
  • This product is not waterproof. Do not use it in water or humid environments.
  • Avoid violent collision, pulling, and extrusion during use and storage.
  • Comply with local relevant laws and regulations when using and disposing of the product.
  • Do not dispose of the product and its packaging into household garbage. Dispose of it in accordance with local environmental protection regulations.

4. Setup and Installation

4.1 Pre-Installation Check

  1. Confirm the product is intact and all accessories are complete before use.
  2. Ensure the mounting area is clean and free from obstructions.

4.2 Installation Steps

  1. Step 1: Mounting the Fan

    Position the fan in the desired location within your server chassis or equipment. Secure the fan using appropriate screws through the mounting holes at each corner. Ensure the fan is oriented correctly for optimal airflow (typically, the label side indicates airflow direction or is the intake side).

    Front view of SUNON server fan with label and wiring

    Figure 1: Front view of the SUNON server fan, showing the label with model number PF80251B2-0000-S99, 12V, 3.4W, and 8025 size. This side typically faces the intake airflow.

  2. Step 2: Connecting the Power and PWM Cable

    Connect the fan's power cable (red and black wires) and the PWM control cable (typically a 4-pin connector) to the corresponding headers on your motherboard or fan controller. The PF80251B2-0000-S99 model features PWM temperature control, requiring a compatible 4-pin fan header for full functionality.

    Angled front view of SUNON server fan with MagLev label

    Figure 2: Angled front view of the SUNON server fan, highlighting the MagLev technology and the 4-pin connector for power and PWM control.

  3. Step 3: Cable Management

    Route the fan cables neatly to avoid interference with other components and to maintain good airflow within the system.

5. Operating Instructions

The SUNON PF80251B2-0000-S99 is a PWM temperature-controlled fan designed for automatic operation. Once properly installed and connected to a compatible fan header, the fan's speed will automatically adjust based on the system's temperature, as managed by the motherboard or fan controller.

  • Automatic Speed Control: The fan will increase its speed when system temperatures rise and decrease speed when temperatures are low, optimizing cooling performance and noise levels.
  • Monitoring: You can monitor the fan speed and system temperatures through your system's BIOS/UEFI settings or dedicated software provided by your motherboard manufacturer.

6. Maintenance and Cleaning

  1. Disconnect Power: Always disconnect the power supply to the system before cleaning the fan.
  2. Cleaning Method: Use a soft, dry cloth to gently wipe the surface of the fan blades and frame. Do not use corrosive, abrasive, or chemical cleaners, as these can damage the product.
  3. Avoid Immersion: Do not immerse the product in water or any other liquid for cleaning.
  4. Storage: When not in use, store the product in a cool, dry, and well-ventilated place, away from direct sunlight and damp environments.
  5. Regular Checks: Regularly check the fan's appearance and connecting parts to ensure they are secure and functioning normally. Look for any signs of wear, damage, or dust buildup.

7. Troubleshooting

If you encounter any issues with your SUNON server fan, please refer to the following general guidelines:

  • Fan Not Spinning:
    • Check if the power cable is securely connected to the motherboard or fan controller.
    • Ensure the system is powered on.
    • Verify that the fan header on the motherboard is enabled in BIOS/UEFI settings.
  • Unusual Noise:
    • Check for any obstructions (cables, dust) hitting the fan blades.
    • Ensure the fan is securely mounted and not vibrating against the chassis.
  • Poor Cooling Performance:
    • Ensure the fan is oriented correctly for optimal airflow.
    • Clean any dust buildup on the fan blades or heatsink.
    • Verify that the PWM signal is functioning correctly, allowing the fan to ramp up speed when needed.

If the fault cannot be resolved using these steps, please stop using the product and contact professional after-sales personnel for handling.

8. Specifications

Feature Detail
Brand Name SUNON
Model Number PF80251B2-0000-S99
Type Server Fan
Voltage DC 12V
Power Consumption 3.4W
Fan Size 80x80x25mm (8025)
Control Type PWM Temperature Controlled
Origin Mainland China
High-concerned chemical None

For more detailed specifications, please refer to the official product datasheet or the User Manual (PDF).

9. User Tips

  • Airflow Direction: Pay attention to the arrow indicators on the fan frame (if present) or the label side to ensure correct airflow direction for your cooling needs. Generally, air flows from the open side towards the side with the motor support struts.
  • Dust Prevention: Consider using dust filters on intake fans to minimize dust accumulation within your system, which can degrade cooling performance over time.
  • Optimal Placement: For server environments, strategic placement of fans (intake and exhaust) is crucial for creating effective airflow paths and preventing hot spots.

10. Warranty and Support

If you have any questions regarding product use, quality, or require after-sales support, please contact our customer service. We are committed to providing comprehensive assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.