1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your J-Leslie 13-inch rear windshield wiper blade. Please read this manual thoroughly before installation and keep it for future reference.
2. Safety Information & Warnings
- Do not operate the wipers without water on the windshield to avoid damaging the rubber blade.
- Avoid forcibly bending the wiper arm to prevent deformation.
- Do not touch the rubber blade with sharp objects.
3. Package Contents
- 1 x Rear Wiper Blade
4. Specifications
| Type | Rear Windshield Wiper |
| Material | Natural rubber + High-strength plastic |
| Color | Black |
| Length | 13 inches (330mm) |
| Package Dimensions | Approximately 45cm x 20cm |
| Package Weight | 0.044 kg |
Image: Wiper Blade Length

The image displays the 13-inch (330mm) length of the wiper blade.
5. Compatibility
This rear windshield wiper blade is designed for:
- Skoda Roomster / Praktik 5J7 5J (Years: 2006-2015)
Important: Please confirm your car model and the shape of your original rear wiper before ordering to ensure proper fitment.
Image: Product with Compatible Vehicle

The main product image shows the 13-inch J-Leslie rear wiper blade alongside a compatible Skoda Roomster/Praktik vehicle.
6. Setup & Installation Instructions
- Lift the wiper arm away from the rear window before installation.
- Align the locking clip of the new wiper blade with the wiper arm attachment point and gently press until it secures with a click.
- Carefully lower the wiper arm back onto the window.
Image: Wiper Clip Mechanism

A close-up view of the wiper blade's locking clip, illustrating how it attaches to the wiper arm.
7. Operating Instructions
After installation, activate the rear wiper switch in your vehicle to test for proper operation and ensure the blade moves smoothly across the window.
Image: Before and After Cleaning

This image shows a split view of a rear window, illustrating the clear visibility after using the wiper compared to a dirty window before use.
8. Maintenance & Precautions
- Do not force-start the wipers when ice is present on the windshield in winter. Clear ice manually first.
- Gently tap the rubber blade after each use to remove any accumulated debris, such as leaves or dirt.
- Avoid prolonged exposure of the wiper blade to direct sunlight or high-temperature environments, as this can degrade the rubber.
- The anti-aging natural rubber material is designed to extend service life.
Image: Natural Rubber Material

This image highlights the use of natural rubber in the wiper blade construction, emphasizing its durability.
Image: Low Noise Operation

An illustration suggesting the wiper operates at a low noise level (≤35dB), ensuring a quiet environment inside the vehicle.
9. Troubleshooting (FAQs)
- Q: The wiper does not operate.
- A: Check the power supply to the wiper motor or inspect the wiper motor itself for issues.
- Q: The wiper provides incomplete cleaning.
- A: This often indicates an aged or worn rubber blade. Replace the wiper blade.
- Q: The wiper produces excessive noise.
- A: Adjust the angle of the wiper arm. If the noise persists, consider replacing the wiper blade or other related components.
10. Warranty & Support
Return & Exchange Policy: Defective products are eligible for return or exchange according to the seller's policy.
For detailed warranty terms, specific support inquiries, or to view the complete user manual, please refer to the official PDF document provided by the seller. You can typically find this document on the product's listing page or by contacting the seller directly.
Reference: A comprehensive user manual is available in PDF format: View User Manual (PDF)