1. Product Overview
The Jaxcam 5MP HD Loudspeaker Outdoor Security PTZ IP Camera offers advanced surveillance features including 5MP Ultra HD resolution, smart human auto tracking, two-way audio, and color night vision. It is designed for outdoor use with IP66 weatherproofing and integrates with the ICSee APP for remote monitoring and control.

Main Features
- 2.5 inch 5MP HD Bluetooth speaker PTZ camera
- External audio loudspeaker and camera voice alarm
- Supports Bluetooth music playback and TF card (Maximum 64G) music playback
- Support 433 remote control for TF card audio playback
- 3.6mm lens, built-in infrared light + white light, night vision infrared and night vision full color can be set
- Pan&Tilt: horizontal 0~355 degrees, vertical 0~90 degrees
- 2.4G WIFI for Internet access
- Support TF card storage (Maximum 128G) and cloud storage
- Supports two-way voice intercom and video playback
- Support humanoid detection, intelligent sound and light alarm, can customize the alarm sound
- Support automatic tracking, preset point, preset point cruise function
- Supports Bluetooth quick network configuration
- Supports PC client preview (VMS)
- Support Android/IOS APP remote management
- Waterproof grade IP66, power supply DC 12V
2. Setup and Installation
2.1. Downloading and Installing the APP
The camera operates with the 'iCSee' application. You can download it using one of the following methods:
- Method 1: App Store / Google Play Search
Search for 'iCSee' in your mobile device's App Store (iOS) or Google Play (Android), then download and install it.

Figure 2: iCSee App download options. - Method 2: QR Code Scan
Scan the QR code below with your mobile device to directly download the 'iCSee' App.

Figure 3: QR Code for iCSee App download.
2.2. Registering a New Account and Logging In
- Open the 'iCSee' App.
- Click 'SignUp' and register a new account using your phone number or email.
- Alternatively, you can use WeChat, Facebook, Line, or 'Visitor Login' to access the App. Note: Some functions may not be available in 'Visitor Login' mode.
2.3. APP Connection
Before connecting, ensure your mobile device is connected to your home's 2.4GHz Wi-Fi network. The camera does not support 5G Wi-Fi.
- Preparations
- Connect the camera to a suitable power supply and place it close to your mobile device and router.
- After power-on and self-check, long-press the 'Reset' button for 8 seconds. Release it when you hear a prompt tone indicating a successful reset. Wait for 1 minute before proceeding.
- Ensure your mobile device is connected to your home's 2.4GHz Wi-Fi network.
- Method A: Configure Network via Wi-Fi
- In the main APP interface, click the '+' sign (top right corner).
- Select 'WiFiCamera' and follow the device's voice prompts (click 'Next').
- On the 'Router Setting' interface, select your Wi-Fi Router and enter the password. Click 'Confirm' to proceed to the 'Scan Code Pairing instruction' interface.
- After successful connection, set a new password for your camera and click 'Confirm'.
- Once the device is successfully added and named, click to open the real-time preview screen.
- Method B: Configure Network via Bluetooth (BT)
- Ensure your phone's WLAN switch is on, then pair and connect.
- Click the '+' sign to enter the automatic device search interface.
- Select 'Other distribution networks and adding methods', then 'Nearby Cameras'.
- Click the searched camera to add it and set the login name and password.
3. Operating Instructions
3.1. Two-Way Audio
The camera features a built-in microphone and speaker, enabling two-way audio communication. You can greet visitors or deter intruders remotely via your smartphone.

3.2. Auto Tracking & Human Detection
The smart tracking function allows the camera lens to automatically follow moving objects. When human movement is detected, the camera sends a prompt message. Alarm voice and automatic lighting can be configured in the settings.

3.3. Smart Night Vision Mode
The camera automatically switches between infrared and full-color night vision modes to provide optimal visibility in low-light conditions. This setting can be adjusted manually within the app.

3.4. PTZ Control
The camera's pan (355°) and tilt (90°) functions can be controlled directly through the iCSee app, allowing you to monitor every corner of your property.

3.5. Flexible & Secure Storage Options
The camera supports local storage via a TF card (up to 128GB) and also offers cloud storage services (additional cost may apply).

3.6. P2P Remote Access
With the mobile app, you can easily access and remotely control the camera, watch live video, and receive alarm notifications at any time. The camera also supports multi-user viewing, allowing you to share access with family or friends.

4. Maintenance
4.1. Resetting the Camera
If you forget the camera's password or need to restore factory settings:
- Online: If the camera is connected online, you can find the reset option within the phone application or PC software.
- Offline: If the camera is offline, press and hold the reset button on the camera's connection line for 15-20 seconds to perform a factory reset.
4.2. TF Card Troubleshooting
If you cannot find video files during playback:
- Confirm the status of the TF card in the disc information section of the app.
- Replace the TF card with a new one to test if the issue is resolved.
5. Troubleshooting (FAQ)
5.1. What should I do if my device can't connect to the router?
- Ensure your Wi-Fi network is functioning normally (test by connecting your mobile phone to it).
- Verify that the Wi-Fi password is entered correctly.
- Make sure your router's Wi-Fi password does not contain special characters (e.g., @#$%"*) and that the Wi-Fi SSID is correct.
- The distance between the device, router, and mobile phone should be within 1.5 meters (5 feet).
- Confirm your router configuration: The camera does not support 5G Wi-Fi. If you have a dual-band router, you may need to turn off the 5G band temporarily during setup.
- Try connecting with a different Android/iOS phone.
- Reset the camera.
- Contact Customer Service at euro@enster.net for assistance. You should receive a reply within 24 hours.
5.2. Can adverts on the app be turned off?
Yes, you can turn off adverts by navigating to "Me" > "Tools" > "Ad" within the app.
6. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Jaxcam |
| Style | Dome Camera |
| High Definition | 5.0 Megapixels |
| Lens (mm) | 3.6mm |
| Connectivity | WIFI(2.4GHz) |
| Supported Operating Systems | Windows 10 |
| Power Supply | Normal |
| Megapixels | 5 MP |
| Lens Quantity | Single Lens |
| Zoom | NONE |
| Zoom type | None |
| High-concerned chemical | None |
| Whether or Not 50Vac or 75Vdc or Higher Power Supply | No |
| Camera Resolution | 5mp |
| Two-Way Audio | Support |
| Auto Tracking | Support |
| P2P Remote Access | Support |
| Cloud Storage | Support |
| Full Color Night Vision | Support |
| Outdoor Waterproof | Support |
| Working Temperature | -35° ~ 55° |
| Origin | Mainland China |
6.1. Package Dimensions & Weight
- Length: 17 cm
- Width: 14 cm
- Height: 27 cm
- Weight: 0.88 kg
7. User Tips
- For optimal performance, ensure your camera is connected to a stable 2.4GHz Wi-Fi network. 5GHz networks are not supported.
- When setting up, place the camera close to your router and mobile device to ensure a strong signal during the initial connection process.
- If you experience connectivity issues, double-check your Wi-Fi password for special characters, as some may cause problems.
- Consider using a high-quality TF card (up to 128GB) for reliable local video storage.
8. Warranty and Support
8.1. Warranty Information
This product comes with a 3-year warranty.
8.2. Customer Support
For any technical issues or support, please contact customer service at euro@enster.net. You can expect a reply within 24 hours.
8.3. Additional Resources
A detailed user manual in PDF format is available for download. You can view it here: User Manual (PDF).
9. Compliance and Disclaimer
9.1. FCC Compliance Declaration
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and may radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and back on, the user is encouraged to attempt to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
9.2. Disclaimer
⚠️️Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.