Introduction
Thank you for choosing the WOLFBOX M40 4K Mirror Dash Cam. This product is designed to provide high-quality video recording, capturing irrefutable evidence in the event of an accident, and documenting your journeys. WOLFBOX is a professional automotive supplies manufacturing company with over ten years of experience in dash cams, committed to building reliable and trustworthy automotive supplies.
Precautions
- For further inquiries, please contact our customer service via email at service@wolfbox.com.
- Always use original accessories to prevent compatibility issues and insufficient current supply. Using non-compatible accessories, such as 2-in-1 or 3-in-1 cigar sockets, may not provide enough current to the device.
- Do not tamper with or splice the rear camera wire for extension purposes, as this may result in loss of the rear image/feed to the display. The included rear camera cable is 20 feet, suitable for most car types.
- If using a micro SD card with a capacity greater than 32GB, format it to FAT32 on a PC. A Class 10 (10MB/s) micro SD card is required.
Warnings
- Keep small accessories out of reach of children. If the product is damaged or malfunctions, discontinue use immediately and contact WOLFBOX support. Continued use may lead to fire, electric shock, or vehicle failure.
- This product is intended as reference material in the event of an accident. Its effectiveness or admission as complete evidence is not guaranteed.
- Be aware that this product may infringe on privacy and other rights depending on its use. WOLFBOX is not responsible for any such infringements.
- This product is designed for DC12V/24V vehicles only.
- Specifications and appearance are subject to change without notice for improvement.
Product Specifications
| Feature | Specification |
|---|---|
| RAM | DDR3 2Gb |
| Display Type | IPS |
| Video Format | TS, MP4 |
| Image Format | JPG |
| Front Camera Resolution | 4K (2160P) |
| Rear Camera Resolution | 1080P |
| Display Size | 10" |
| Rear Lens Frames Per Second (FPS) | 30 fps |
| Power Interface | USB Type-C |
| GPS | External, 3.5mm headphone interface (GPS module required for GPS function) |
| Loop Recording | Supported |
| Photograph Function | Supported |
| Operating Temperature | -4°F ~ 158°F |
| Full Touch Screen | Supported |
| Max External Memory | 512G (Minimum 32GB, Class 10 required) |
| Built-in Screen | Yes |
| NightShot Function | Yes |
| OSD Language | Chinese (Simplified), Chinese (Traditional), English, French, German, Italian, Japanese, Korean, Latvian, Spanish |
| Assembly Mode | Portable Recorder |
| Chipset Manufacturer | HISILICON |
| Frames Per Second | 60 |
| Item Type | Car DVR |
| Certification | CE |
| Batteries Included | Yes |
Package Contents
The WOLFBOX M40 Mirror Dash Cam package includes the following items:
- M40 Mirror Dash Cam (2160P)
- Rear Camera (1080P)
- GPS Receiver
- 20ft Rear Cam Cable
- Type-C Power Cable with Car Charger
- Adhesive
- Rubber Straps (x4)
- User Manual
- Mount Tool
- Cleaning Cloth
- Cable Clips (x5)
Device Appearance and Interface Overview
| No. | Name | Description |
|---|---|---|
| 1 | Lens | Front lens, records the front view |
| 2 | USB Type-C Port | Port for power supply/connection |
| 3 | Rear camera connector | Port used to connect the rear camera |
| 4 | TF card slot | Provides expandable storage (Class 10 Max 256GB) |
| 5 | GPS connector | Used to connect GPS module (GPS function requires optional GPS antenna) |
| 6 | Fasteners | The machine can be held in position with 2 straps |
| 7 | Display screen | 10" touch screen display |
| 8 | Power button | Short press to wake up/sleep, long press to power on/off |
Setup and Installation
Before installing your dash cam, it is recommended to test its functionality with all accessories and adjust default settings to your preference.
1. SD Card Installation
Ensure the dash cam is powered off before inserting or ejecting the SD card.
2. Unit Installation (Mirror Dash Cam)
Place the M40 Mirror Dash Cam onto your vehicle's rearview mirror. Ensure the silicone brackets on both sides of the rearview mirror are separated. Secure the device to the rearview mirror using the provided rubber straps. Adjust the front lens to your desired angle.
3. Power Connection
Connect the car charger to the charger adapter to supply power to the dash cam. The dash cam will automatically turn on when the car is started if the cigarette lighter port is ACC.
4. Rear Camera Installation
The rear camera can be installed either outside or inside the car. If you do not need to adjust the angle, you can remove the iron plate from the bracket.
5. Rear Camera Wiring Instructions
The rear camera has two wiring routing options, both designed to conceal the wire along the edges of the door.
- Connect the rear camera cable to the mirror: Plug the rear camera cable into the AV interface of the main unit.
- Rear camera cable routing: Route the rear camera cable to the rear of the car, leaving some slack. Insert the cable into the gap in the front windshield and along the upper end of the door using the included tool. If installing the rear camera inside your car, fix it on the rear windshield after routing the wiring.
- Remove the panel: Open the trunk and remove the interior panel covering the license plate mount area. Use a trim removal tool or thin device to pry the panel open.
- Fix the rear camera and connect the cables: Fix the rear camera near the license plate light with 3M glue. Connect the rear camera cable through the license plate light hole to the rear camera cable.
- Connect the red wire to the reverse light's positive terminal: Find the positive terminal of the reverse light (the terminal with voltage when the car is in reverse gear). Strip the positive cable and wrap it with the red cable from the camera. Insulate the connection with electrical tape. Test by putting the car in reverse gear to see if the dash cam enters reverse mode.
6. GPS Installation
Install the dash cam in the right corner of the central console and hide the wiring along the edge of the front windshield using double-sided tape. The black side of the GPS module should face up to receive the GPS signal.
Once the GPS is installed and a signal is received, the GPS icon will appear on the home screen, displaying direction and speed.
Operating Instructions
1. User Interface Overview
The main screen displays various icons indicating the device's status and available functions.
| Icon | Description |
|---|---|
| Speed & Driving Direction | Displays speed and driving direction once GPS is connected. |
| Date & Time | Current date and time. |
| Sound | Toggle device sound on/off. |
| Wi-Fi | Toggle Wi-Fi on/off. |
| Voice Commands | Access specific voice command entries. |
| Driver Assistance Display | Toggle Driver Assistance Display Interface on/off. |
| Smart Drive Menu | Tap to enter the Smart Drive menu. |
| Recording | Start/Stop recording. |
| Camera View | Switch between front, rear, and split-screen camera views. |
| Snapshot | Take a snapshot. |
| Recording Status | Flashing yellow indicates Lock-Recording. |
2. Playback Mode
When the dash cam is powered on, it automatically starts recording. To enter playback mode, click or select the playback icon.
| Icon | Description |
|---|---|
| File Playback | Playback videos and photos. |
| Audio Recording | Toggle audio recording on/off. |
| Settings | Tap to enter the settings menu. |
| Front Camera Images | Stores images captured by the front camera. |
| Rear Camera Images | Stores images captured by the rear camera. |
| Normal Video | Select to view recorded videos. |
| Locked Video | Select to check locked videos. |
| Photos | Select to check photos. |
| Select | Select items. |
| Delete | Delete selected files. |
| Lock Video | Lock the video. |
| Full Screen View | View videos on full screen. |
3. Function Overview (Settings Menu)
Click the settings icon to enter the function menu, where you can adjust various functions and parameters.
| Function | Option | Description |
|---|---|---|
| Resolution | 4K30fps+1080P25fps / 2.5K30fps+1080P25fps / 1080P30fps+1080P25fps | Video resolution selection. |
| Display Modes | F-cam/R-cam/Split Screen | Set the default video recording interface display screen upon startup. |
| Sound Record | ON/OFF | Set whether to record sound. |
| Loop Recording | 1 Minute/2 Minutes/3 Minutes | Set the duration for loop recording of video files. |
| G-Sensor | OFF/Low/Medium/High | Set the sensitivity of the G-sensor. |
| Fatigue Reminder | OFF/1 Hour/2 Hours/3 Hours | Set the time for fatigue reminder. |
| Wi-Fi | ON/OFF | Set the status of the device's Wi-Fi connection. |
| Click Tone | ON/OFF | Set the switch for key tones. |
| Screen Saver | OFF/10 Seconds/30 Seconds/2 Minutes | Set the activation time for the screen saver. |
| Screen Brightness | Adjustable | Adjust the screen brightness. |
| Exposure | Adjustable | Adjust the contrast of the front camera. |
| Voice Control | ON/OFF / Voice Command | Set the switch for voice control functionality. |
| Mirror Flip | ON/OFF | Adjust the left-right flip of the rear camera image. |
| Rear Cam Flip | ON/OFF | Adjust the up-down flip of the rear camera image. |
| Reversing Line | ON/OFF | Set the switch for the reversing line display function. |
| Parking Mode | ON / G-Trigger Recording / 12H Time-lapse recording / 24H Time-lapse recording / 48H Time-lapse recording | Monitors the vehicle's status after the engine is turned off. Requires hardwire kit (purchased separately). |
| GPS | Display recorded GPS data. | Displays recorded GPS data. |
| Time Display | ON/OFF | Set whether to display Time information on the recording interface. |
| GPS Display | ON/OFF | Set whether to display GPS information on the recording interface. |
| Date Stamp | ON/OFF | Set the switch for time watermark. |
| Speed Stamp | ON/OFF | Set the switch for speed watermark. |
| GPS Stamp | ON/OFF | Set the switch for GPS watermark. |
| Speed Unit | KM/H / MPH | Set the unit for speed display. |
| Language | English/Français/Deutsch/Italiano/Español/... | Set the language for the device. |
| Clock Setting | Adjustable | Adjust the current time displayed on the device. |
| Date Format | YY-MM-DD / DD-MM-YY / MM-DD-YY | Set the time display format. |
| Time Style | 12 Hours/24 Hours | Set the time display system. |
| Time Zone | Adjustable | Adjust the time zone based on geographical location. |
| DST (Daylight Saving Time) | ON/OFF | Set the switch for daylight saving time. |
| Flicker | 50 Hz/60 Hz | Set the screen refresh rate. |
| APP | QR Code | Display QR code for downloading the app. |
| Product Information | Display device information. | Displays device information. |
| Help Center | Contact Information | After-sales contact information. |
4. Driver Assistance Feature (ADAS, BSD, LCA)
Driver Assistance features enhance safety and convenience. Settings can be customized in the menu.
- Calibrate: Manually calibrate driver assistance features. Refer to in-feature instructions for detailed steps.
- ON/OFF: Turn the corresponding feature on/off.
- Setting: Manually adjust detailed settings for each driver assistance feature.
ADAS (Front Camera Driver Assistance Features)
- Lane Departure: Automatically detects lane markings and alerts if the vehicle deviates from the lane.
- Forward Collision: Calculates distance to the vehicle ahead and warns of potential collision risks.
- Pedestrian Collision: Calculates distance to pedestrians or non-motorized vehicles ahead and warns of potential collision risks.
- Stop & Go: Monitors the front vehicle's departure and reminds you to start in a timely manner.
- Forward Distance: Monitors distance to the vehicle ahead and reminds you to adjust following distance.
BSD (Rear Camera Driver Assistance Features)
- Rear Collision: Calculates distance to the vehicle behind and warns of potential collision risks.
LCA (Rear Camera Driver Assistance Features)
- Lane Change Assist: Monitors side and rear areas, providing alerts for lane changes by your vehicle or vehicles behind.
Note on Driver Assistance Features:
- Optimal performance requires an active GPS connection.
- ADAS and BSD/LCA features are mutually exclusive; only one set can be active at a time.
- The dashcam automatically calibrates Smart Drive features upon startup. Drive at 20km/h (10mph) or above for 2-3 minutes for automatic calibration. Inaccurate speed measurement may occur if GPS is not positioned or the signal is weak.
5. Play on APP (Wi-Fi and APP)
The Wi-Fi feature allows wireless pairing with your smartphone to access recordings, view, download, and share videos via the "WOLFBOX" app.
- Download the "WOLFBOX" app: Visit https://wolfbox.com/app/ or scan the QR code below.
Figure 16: WOLFBOX App QR Code - Enable Wi-Fi: Go to Settings on the device to turn on Wi-Fi. The device screen will display the Wi-Fi name and password.
- Connect Wi-Fi: On your smartphone, go to Settings > Wi-Fi, select "M40 Wi-Fi", and enter the default password: 12345678.
- Open the "WOLFBOX" app: Once connected, open the app. The camera will sync automatically, and you should see the live video feed.
You can view, edit, and share downloaded local albums within the app.
6. How to Play Video on Computer
WOLFBOX recommends using the "GPS Media Player" application to watch and play dash cam videos, and view Google Maps data. You can download it for free on Mac or Windows from: https://wolfbox.com/gps-player/
If you record front and rear dash cam videos simultaneously and add them to the playlist, you can play them side-by-side in split-screen mode. To play a video file, drag and drop it onto the video player.
Maintenance
- SD Card Formatting: Regularly format your SD card to ensure optimal performance and prevent data corruption. This option is available in the settings menu.
- Reset Setup: If you encounter persistent issues or wish to restore all settings to their original state, you can use the "Reset Setup" option in the settings menu to restore factory defaults.
Troubleshooting
- Remote Monitoring via Wi-Fi: Due to limited Wi-Fi range, remote monitoring of the vehicle via the app connected to the M40 is not possible.
- Blurred or Undetected Camera Image:
- Blurred image: Ensure the protective film is removed from the lens and clean the lens with a cleaner. If focusing issues are due to high temperatures, contact support.
- Camera not detected: Check the AV and REAR inputs on top of the mirror, and inspect the extra camera cable and rear camera cable for damage, especially at the connectors.
- Connecting to App via Wi-Fi:
- Ensure Wi-Fi is manually turned on in settings.
- Search for "WOLFBOX" in your app store and download the latest version.
- Check your smartphone's Wi-Fi list for a network named "WOLFBOX".
- If the app displays "Connection Failed", use the "Get Support" option in the app to contact us.
User Tips
- For motorhome users, the M40 provides excellent rear visibility, especially where traditional mirrors are obstructed. The hardwire kit is generally easy to install, though routing the rear camera cable can be challenging.
- The 10-inch screen is noted to fit well over original mirrors in various car models, such as the Audi A3 8P. Installation can be quick, often under 30 minutes.
- Be aware that if the reverse camera display is not constantly on, the mirror itself might appear darker than a stock rearview mirror, especially at night. This is a consideration if you prefer using it as a traditional mirror.
- The device offers great video quality, even at night, with a clear and easy-to-read display.
- If you experience a missing 64GB card, contact customer service immediately for a replacement.
Warranty and Customer Support
WOLFBOX is committed to providing the best product experience and after-sale service.
- Warranty Period: The standard warranty period is 18 months. If machine parts are damaged or issues arise during use, WOLFBOX will provide timely solutions. The specific warranty period may be subject to local laws.
- Free Replacement & Technical Support: Contact WOLFBOX with your online order for free replacement and lifetime technical support.
- Extended Warranty: Register your product information on wolfbox.com to extend the warranty for an additional 6 months free of charge. Visit https://wolfbox.com/pages/warranty-form to register.
- User Manual PDF: A PDF version of the user manual is available for download here.
Customer Service Contact
If you have any problems with the function or installation, please contact us:
- Email: service@wolfbox.com
- Phone: +1 888 296 8399
- Website: https://wolfbox.com/contact-us