CHOUDAO TECH F21

Contents

F21 LED Night Light Toilet Light User Manual

USB Charging, Multiple Light Modes, Light Sensor and Motion Sensor Control, Ideal for Bathrooms

1. Introduction

Thank you for purchasing the F21 LED Night Light Toilet Light. This innovative device combines a motion-activated night light with automatic UV sterilization, providing convenience and hygiene for your bathroom. It features USB charging, adjustable brightness, and smart sensor controls to enhance your nighttime experience.

2. Safety Information

  • Always ensure the power supply is turned off during installation and disassembly.
  • Handle internal components with care to prevent damage or malfunction.
  • Use only a qualified power adapter or the provided USB cable for charging.
  • If the light begins to dim, charge or replace the battery immediately.
  • Avoid direct sunlight or placing the device in excessively humid environments.
  • Avoid frequent switching when using switch control to prolong device life.

3. Package Contents

Please check the package for the following items:

  • F21 LED Night Light Toilet Light
  • USB Charging Cable
  • Double-sided Adhesive Tape (pre-attached to base)
  • User Manual (this document and a PDF version)

4. Specifications

Feature Specification
Model Number F21
Brand Name CHOUDAO TECH
Item Type Night Lights
Type Night Light
Body Material Plastic
Shape Rectangle
Wattage 0-5W
Luminous Flux <60
Nominal Voltage 3.7 V
Voltage 3.7 V
Battery Capacity 1800mAh
Is Batteries Included Yes (Rechargeable)
Is Batteries Required No (Built-in rechargeable)
Is Bulbs Included No (Integrated LED)
Motion Sensing Distance Within 4 meters
Motion Sensing Angle 120°
UV Sterilization Duration 3 minutes
Night Light Duration 90 seconds (after motion detection)
Dimensions (Approx.) 10cm (Length) x 5cm (Width)
Certification EMC, FCC, ROHS
Is Smart Device Yes
High-concerned chemical None
Origin Mainland China

Note: All specifications are approximate and may vary slightly.

5. Setup and Installation

The F21 LED Night Light is designed for easy, tool-free installation.

  1. Choose a Location: Select a suitable installation position, typically on the underside of your toilet lid. Avoid direct sunlight or excessively humid areas.
  2. Prepare the Surface: Ensure the surface where the light will be mounted is clean and dry.
  3. Attach the Base: The device comes with a special double-sided adhesive tape pre-attached to its base. Carefully tear off the protective film from the tape.
  4. Secure the Base: Firmly glue the base to the chosen location on your toilet lid. Press for a few seconds to ensure good adhesion.
  5. Snap the Lamp: Align the F21 lamp unit with the installed base and gently snap it into place.
Installation steps for the F21 toilet light
Figure 1: Installation steps - 1. Tear off double-sided tape. 2. Glue base to desired location. 3. Snap lamp onto base.
Dimensions of the F21 toilet light
Figure 2: Product dimensions - approximately 10cm (3.94 inches) in length and 5cm (1.97 inches) in width.

6. Operation

6.1 Motion-Activated Night Light Mode

The F21 features a built-in infrared human body sensor and a light sensor. It operates in two main modes:

  • At Night (Low Light Conditions): When motion is detected within 4 meters and a 120° wide angle, the night light will automatically turn on. It will remain lit for 90 seconds after motion ceases.
  • During the Day (Sufficient Light Conditions): The light sensor will prevent the night light from activating, saving battery power.
Motion detection range of the F21 toilet light
Figure 3: Motion sensor detection range of 4 meters and 120 degrees.
Night light operation based on time of day
Figure 4: Lights turn on at night when motion is detected and turn off during the day.

6.2 Automatic UV Sterilization

The F21 is equipped with professional UV sterilizing lamp beads to maintain hygiene.

  • Activation: When the toilet lid is closed, the built-in UVC ultraviolet germicidal lamp automatically activates for 3 minutes to sterilize the toilet bowl.
  • Safety Feature: If the toilet lid is opened during the sterilization process, the UV lamp will immediately turn off to ensure user safety.
Close-up of professional UV sterilizing lamp beads
Figure 5: Professional UV sterilizing lamp beads for hygiene.
UV sterilization in action when toilet lid is closed
Figure 6: Automatic sterilization when the toilet lid is closed.

6.3 Adjustable Brightness

The front button on the device allows you to adjust the brightness of the night light:

  • Short Press: Each short press of the front button will cycle through low, medium, and high brightness levels.
  • Long Press: A long press of the button will turn the night light off completely.
Front button for one-touch brightness adjustment
Figure 7: Front button for one-touch brightness adjustment (Low, Medium, High).

6.4 Product Demonstration Video

Video 1: Demonstration of the F21 Toilet Sterilization Light's features, including induction mode, automatic sterilization, and brightness options.

7. Maintenance

7.1 Charging the Device

The F21 is powered by a large capacity 1800mAh rechargeable battery. To charge:

  • Locate the USB charging port on the device.
  • Connect the provided USB charging cable to the device and a qualified power adapter (not included).
  • Indicator Lights: A red light indicates that the device is currently charging. A green light indicates that the device is fully charged.
  • A full charge can last up to 2 months with typical usage (8 times a day).
Charging status indicator for the F21 toilet light
Figure 8: Charging status - Red light for charging, Green light for fully charged. Features an 1800mAh battery.

7.2 Cleaning

  • Wipe the device with a soft, damp cloth.
  • Do not use abrasive cleaners or immerse the device in water.
  • Ensure the device is dry before reattaching it to the base or using it.

8. Troubleshooting

Problem Possible Cause Solution
Night light does not turn on. 1. Insufficient battery. 2. Ambient light is too bright. 3. Motion sensor blocked or out of range. 1. Charge the device fully. 2. Ensure the bathroom is dark enough for the light sensor to activate. 3. Check if anything is obstructing the motion sensor. Ensure movement is within 4m/120°.
UV sterilization does not activate. 1. Toilet lid not fully closed. 2. Insufficient battery. 1. Ensure the toilet lid is completely closed. 2. Charge the device fully.
Light dims quickly after charging. Battery degradation or faulty charging. Ensure you are using a qualified power adapter. If the issue persists, contact customer support.
Device falls off the toilet lid. Improper installation or surface not clean. Clean the installation surface thoroughly and reapply the adhesive base firmly. Ensure the surface is dry.

9. User Tips

  • USB Connection: The USB charging port is typically located on the side or back of the main unit. Gently detach the light from its base to access the port for charging.
  • Optimal Placement: For best motion detection, ensure the sensor faces the area where you typically approach the toilet.
  • Battery Life: To maximize battery life, ensure the device is fully charged before first use and recharge promptly when the indicator shows low battery.

10. Warranty and Support

This product is covered by a standard manufacturer's warranty. For detailed warranty terms, technical support, or service inquiries, please refer to the official product page or contact the seller directly. Please retain your purchase receipt as proof of purchase.

For additional detailed instructions, you may refer to the official user manual PDF: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.