Tinsol FK-8803

Contents

TINSOL Men's Crew Cut Automatic Hair Clipper

Model: FK-8803

User Manual

Introduction

Thank you for choosing the TINSOL Crew Cut Automatic Hair Clipper. This manual provides essential information for the safe and effective use of your new grooming device. Please read it thoroughly before first use and keep it for future reference.

Important Safety Instructions

When using electrical appliances, especially when children are present, basic safety precautions should always be followed:

  • Do not immerse the appliance in water.
  • Keep away from water sources.
  • Do not use while bathing or showering.
  • Unplug before cleaning.
  • Keep out of reach of children.
  • Do not use if the appliance is damaged.
  • Use only with the provided charging cable.

Package Contents

Please check that all items are included in your package:

  • 1 x TINSOL Crew Cut Clipper
  • 3 x Guide Combs (5mm, 7mm, 9mm)
  • 1 x Cleaning Brush
  • 1 x USB Type-C Charging Cable
Contents of the TINSOL Crew Cut Clipper package: the clipper, three guide combs, a cleaning brush, and a USB-C charging cable.

Description: An image displaying all components included in the product package: the main clipper unit, three clear plastic guide combs, a small cleaning brush, and a black USB-C charging cable.

Setup

Charging the Clipper

Before first use, fully charge the clipper for 2 hours to ensure optimal battery performance.

  1. Connect the Type-C charging cable to the clipper's port.
  2. Connect the other end of the USB cable to a compatible USB power source (e.g., computer, power bank, car charger, or wall adapter).
  3. The digital display on the clipper will show the charging progress. A full charge provides approximately 90 minutes of usage time.
Clipper charging via USB-C cable connected to a laptop, showing 2h fast charging and 90min long-lasting battery.

Description: The clipper is shown connected to a laptop via its USB-C charging port. The image highlights '2h Fast Charging' and '90min Long-Lasting Battery'.

Guide Comb Installation

Attach the desired guide comb for your preferred hair length:

  1. Ensure the clipper is powered off.
  2. Place the desired guide comb (5mm, 7mm, or 9mm) with the teeth facing up on top of the clipper head.
  3. Rotate the guide comb clockwise and insert it into the clipper slot until you hear a 'click' to secure it.
Three-step guide for comb installation: 1. Ensure clipper power off. 2. Place guide comb teeth-up on top of clipper. 3. Rotate guide comb clockwise until a click.

Description: A visual guide demonstrating how to attach the guide combs. Step 1 shows the clipper powered off. Step 2 shows placing the comb on top. Step 3 shows rotating the comb to lock it in place.

Operating Instructions

Power On/Off

Press the power button on the clipper to turn it on or off. The LED display will illuminate when powered on.

Selecting Hair Length

Choose one of the three provided guide combs (5mm, 7mm, or 9mm) based on your desired hair length. For shorter cuts, the clipper can be used without a guard.

Three guide combs with lengths 5mm, 7mm, and 9mm.

Description: An image showing the three different guide comb attachments, clearly labeled with their respective cutting lengths: 5mm, 7mm, and 9mm.

Haircutting

The TINSOL clipper is designed for one-handed use, allowing for self-trimming and easy haircuts at home. Move the clipper against the direction of hair growth for an even cut.

Man using the TINSOL clipper to give himself a crew cut, demonstrating one-handed use.

Description: A man is shown using the clipper on his own head, illustrating the ease of one-handed operation for a crew cut.

Digital Display

The LED HD Digital Display shows the following statuses:

  • Battery Display: Percentage of remaining battery.
  • Charging Reminder: Indicates when the battery is low and needs charging.
  • Travel Lock: Shows if the travel lock is activated.
  • Washing Instructions: May indicate when cleaning is recommended or if the device is in washing mode.
LED HD Digital Display showing battery percentage, charging reminder, travel lock, and washing instructions icons.

Description: Close-up of the clipper's digital display, highlighting icons for battery level, charging reminder, travel lock, and washing instructions.

Travel Lock

  • To activate: Press and hold the power button for 3 seconds. The lock icon will appear on the display.
  • To deactivate: Press and hold the power button for 3 seconds. The lock icon will disappear.

Maintenance

Cleaning

The clipper is IPX6 fully washable for easy and hygienic cleaning:

  1. Ensure the clipper is powered off before cleaning.
  2. Remove the guide comb.
  3. Rinse the clipper head and body under running water to remove loose hair and debris.
  4. Use the provided cleaning brush to remove any stubborn hair particles from the blades.
  5. Allow the clipper to air dry completely before storing or recharging.
Hand holding the clipper under running tap water in a sink, demonstrating full body wash and easy hair rinse.

Description: The clipper is shown being rinsed under a faucet, emphasizing its fully washable design for easy cleaning.

Close-up of the clipper head being rinsed under water, highlighting IPX6 full body washable feature.

Description: A detailed view of the clipper head being washed under running water, reinforcing its IPX6 waterproof rating.

Blade Care

The clipper features high-precision steel blades and a staggered blade alignment for smoother trimming. No special lubrication is typically required for these self-sharpening blades.

Replacement Heads

Replacement heads may be available for purchase. Contact customer support for more information.

Troubleshooting

  • Clipper not turning on: Ensure the clipper is fully charged. Check if the travel lock is activated and deactivate it if necessary.
  • Poor cutting performance: Ensure the blades are clean and free of hair. Make sure the guide comb is properly attached. Charge the clipper if the battery is low.
  • Clipper not charging: Check the USB cable and power adapter for damage. Ensure the cable is securely connected to both the clipper and the power source.

Specifications

FeatureDetail
Product NameBuzz Cut Clipper
Model NumberFK-8803
Rated Power10W
Rated Voltage5V ⎓ 1A
Charging Time2 Hours
Usage Time90 Minutes
Charging MethodType-C Charging
Cleaning MethodFull Body Wash (IPX6)
Blade MaterialStainless Steel
Minimum Haircut Length5 mm (with comb)
Length Adjustment MethodKnob turn (via combs)
Motor TypeROTARY
Target AudienceAdults
FunctionsDry haircut, Charging indication
Dimensions8cm (width) x 8.3cm (height)
CertificationRoHs, CE
Is Batteries IncludedYes
Product specifications showing dimensions: 8cm width, 8.3cm height.

Description: A visual representation of the clipper's dimensions, indicating a width of 8cm and a height of 8.3cm.

User Tips

  • Many users find this clipper very easy to use, even for self-haircuts.
  • For best results, ensure the clipper is fully charged before each use.
  • Regular cleaning after each use will maintain optimal performance and hygiene.

Warranty and Support

The product is covered by a warranty against manufacturing defects for a period from the date of purchase. To claim warranty service, please present your proof of purchase.

The warranty does not cover damage caused by improper use, unauthorized repairs, drops, or natural disasters. For warranty claims or technical support, please contact the seller or authorized service center.

Environmental Protection

The built-in rechargeable battery contains substances that may be harmful to the environment if not disposed of properly. Do not dispose of the appliance with general household waste at the end of its life.

Please remove the battery before disposal or take the appliance to a designated collection point for recycling. For battery removal, cut off the power, use all the screws to open the front and rear panels, and then remove the battery.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.