1. Product Overview
The KEBIDUMEI Clip-on Earphones integrate a professional sound card, supporting various functions including K Song, live streaming, gaming, and offline music playback via TF card. These earphones feature a professional DSP chip for optimized audio, a low-latency mode for synchronized audio-visual experiences, and broad multi-system compatibility. The unique clip-on design ensures secure and hands-free wearing.

Figure 1: KEBIDUMEI Clip-on Earphones with main control unit.
Key Features:
- Professional DSP Chip: Optimizes vocal dynamics, enhances transmission speed by 92%, and improves anti-interference by 125%.
- 0.06s Low Latency: Synchronizes audio and video for gaming and K Song, ensuring no stuttering or lag.
- TF Card Offline Mode: Allows music playback directly from a TF card without needing Bluetooth or a phone connection. Supports Type-C charging.
- LED Display: Provides clear real-time information on battery level, current mode, and operational status.
- Clip-on Design: Features a spring-back clip for secure and comfortable wear, freeing your hands during live streaming, K Song sessions, or other activities.
- 10mm Dynamic Driver: Delivers clear treble, rich midrange, and deep bass for an immersive audio experience.
- K Song Monitor Mode: A one-key entry feature that allows you to hear your own voice in real-time while singing.
- Voice Assistant: One-key wake-up function for smart assistants like Siri.
- Multi-system Compatibility: Works seamlessly with iOS, Android, and HarmonyOS devices (compatible with approximately 99% of devices).
2. Setup
2.1. Package Contents
Before use, please check the package for the following items:
- KEBIDUMEI Clip-on Earphones
- Charging case (if applicable, though typically integrated with the clip unit)
- Charging Cable (USB Type-C)
- User Manual (this document)
2.2. Charging the Device
Before first use, fully charge the earphones. The device uses a Type-C charging interface.
- Connect the provided USB Type-C charging cable to the charging port on the clip-on unit.
- Connect the other end of the cable to a USB power source (e.g., computer USB port, USB wall adapter).
- The LED display will indicate charging status. A full charge is indicated when the battery icon shows 100% or stops animating.

Figure 2: Type-C Charging Interface and TF Card Slot.
2.3. Powering On/Off
- Power On: Long press the Power button (usually the top-most button on the side) until the LED display lights up.
- Power Off: Long press the Power button again until the LED display turns off.
2.4. Bluetooth Pairing
- Ensure the earphones are powered on and in Bluetooth pairing mode (the LED display might show a blinking Bluetooth icon or 'BT'). If not, triple-click the Function Key to switch to Bluetooth mode.
- On your mobile device (smartphone, tablet, computer), go to Bluetooth settings.
- Search for available devices. You should see