1. Product Overview
The M12 lens, also known as an S-Mount lens, utilizes a standard M12×0.5 threaded interface. It is a widely adopted miniaturized optical component in security monitoring, IP cameras (IPC), smart devices, and other applications. Its compact size, strong compatibility, and ease of installation make it suitable for mainstream CMOS/CCD sensors, including 1/2.5", 1/2.7", 1/3", and 1/4" sizes.
For a visual overview of the product, please watch the video below:
Video: Overview of the M12 Security Camera Lens.
Below is an image detailing the lens specifications:
Image: M12 lens with key specifications highlighted.
2. Specifications
Core Specifications (General)
- Interface Type: M12×0.5 thread
- Focal Length: 2.8mm / 3.6mm / 4mm / 6mm / 8mm / 12mm / 16mm, etc. (This model is 3.6mm)
- Aperture: F1.6 / F2.0 / F2.2 (mostly fixed aperture)
- Resolution: Supports 2MP / 3MP / 5MP / 8MP / 12MP
- Field of View (HFOV): 30°~150° (varies with focal length and sensor)
- Lens Material: All-glass / glass-plastic hybrid
- Barrel Material: Metal (aluminum/brass)
- IR Function: Supports 850nm / 940nm infrared night vision (IR lens)
- Operating Temperature: -20°C ~ 60°C
- Applications: Indoor & outdoor security monitoring, smart home, vehicle, industrial vision
Additional Product Properties
- High-concerned chemical: None
- Lens Type: Manual
- Certification: NONE
- Origin: Mainland China
Focal Length Selection Guide
| Focal Length | FOV (Approx.) | Recommended Monitoring Distance | Applications |
|---|---|---|---|
| 2.8mm | 120° ~ 140° | 1 ~ 5m | Corridors, elevators, narrow spaces |
| 3.6mm | 90° ~ 110° | 2 ~ 8m | Indoor areas, doorways, small shops |
| 4mm | 70° ~ 90° | 3 ~ 10m | Balconies, yards, hallways |
| 6mm | 50° ~ 65° | 5 ~ 15m | Community roads, medium-distance monitoring |
| 8mm | 35° ~ 50° | 8 ~ 20m | Parking lots, factories, entrances |
| 12mm | 25° ~ 35° | 15 ~ 30m | Long-distance, face / license plate recognition |
| 16mm | 15° ~ 25° | 20 ~ 40m | Remote monitoring, narrow-area close-up |
3. Features
- High Light Transmittance: Multi-layer anti-reflection coating with up to 98% light transmittance, reducing glare and ghosting.
- IR Correction: IR lenses optimize 850nm/940nm infrared light for clear day and night imaging without color shift.
- Low Distortion: Optimized optical design with distortion rate generally < 5% for stable edge image quality.
- Sturdy & Durable: Metal barrel is vibration-resistant and temperature-stable, suitable for harsh outdoor environments.
4. Installation & Adjustment Steps
4.1 Preparation
- Tools: Camera, M12 lens, anti-static gloves, small screwdriver, thread lock glue (optional).
- Inspection: Ensure the lens is free of scratches, dust, and intact threads; the camera sensor should be clean.
4.2 Installation Steps
- Disconnect power from the camera. Open the camera housing to expose the lens mount and sensor.
- Wear anti-static gloves. Hold the lens by the edge (DO NOT touch the glass) and align the M12 thread with the camera mount.
- Rotate the lens clockwise gently until tightened. Do not over-tighten to avoid thread damage.
- Power on the camera and view the live feed via a monitoring APP or client software.
4.3 Focus Adjustment
- Aim the camera at the target monitoring area (e.g., corridor, doorway) at the actual working distance.
- Observe the live image and fine-tune the lens slightly clockwise or counterclockwise.
- Stop adjustment when the center and edges of the image are sharp and clear, without blur or double images.
- Locking: After focusing, apply a small amount of special glue on the thread between the lens and mount to prevent loosening and focus shift.
- Reassembly: After the glue dries, reinstall the camera housing to complete the installation.
5. Usage Notes
5.1 Protection Requirements
- Wear anti-static gloves during installation to avoid fingerprints, oil, or dust contamination on the lens.
- Use a waterproof camera housing for outdoor use to prevent water and fog intrusion.
- Avoid strong impact or squeezing to prevent lens displacement or barrel deformation.
6. Cleaning & Maintenance
- Clean the lens: Blow off dust with an air blower, then gently wipe with a lint-free cloth dampened with optical cleaner (circular motion from center to edge).
- DO NOT wipe with paper towels, fingers, or rough cloth to avoid scratching the coating.
7. Troubleshooting
- Blurry image: Improper focus, loose lens, dirty lens, mismatched sensor size.
- Night color shift: Non-IR lens, incompatible IR illuminator.
- Vignetting: Lens image circle smaller than sensor, improper mounting depth.
- Cannot tighten: Damaged threads, foreign objects on mount, incompatible lens model.
8. Compatibility Reminders
- Ensure sensor size matches the lens (e.g., 1/2.7" lens for 1/2.7" sensor).
- IR cameras must use IR lenses; non-IR lenses will cause blurry and discolored night images.
9. Safety & Warranty
- This product is a precision optical component. Do not disassemble or modify without professional guidance.
- Damage caused by human factors (dropping, scratching, unauthorized disassembly) is not covered under warranty.
- Storage: Keep in a dry, dust-free, room-temperature environment, away from direct sunlight and chemical corrosion.
For a comprehensive user manual in PDF format, please refer to the official document: M12 Security Camera Lens User Manual (PDF).
10. User Tips
No specific user tips were available from reviews or Q&A for this product at this time. Always ensure proper handling and follow installation guidelines for optimal performance.