1. Introduction
The TEF6686 Full Band DSP Radio is a high-sensitivity portable receiver designed for enthusiasts and beginners alike. Equipped with a TEF6668 chip, it supports AM and FM across all bands, including FM, Shortwave (SW), Mediumwave (MW), and Longwave (LW).
Its intuitive UI design with a TFT display and backlight allows for easy viewing of various parameters. Features like automatic bandwidth mode help suppress noise, and automatic tuning and memory functions ensure quick reception.
The radio delivers rich, distortion-free stereo sound through its high-performance 45mm dual speakers with a digital amplifier, offering 5W output. Adjustable bandwidth (Auto AM: 3/4/6/8kHz) further optimizes reception in diverse environments.
2. Product Specifications
| Feature | Description |
|---|---|
| Model | TEF6686 |
| Style | Portable |
| Type | AM / FM (Full Band DSP Radio) |
| Origin | Mainland China |
| Weight | 0.95 kg |
| FM Frequency Range | 65-108 MHz |
| LW Frequency Range | 144-513 KHz |
| MW Frequency Range | 520-1720 KHz |
| SW Frequency Range | 1.7-27 MHz |
| Speakers | 45mm dual speakers, 5W output |
| Certifications | CE, FCC |
3. Setup
3.1 Package Contents
Please ensure all items are present:
- TEF6686 Full Band DSP Radio
- Remote Control
- Telescopic Antenna
- USB Charging Cable
- User Manual (this document)
3.2 Powering On/Off
- To Turn On/Off: Long press the Power button (red button on the front panel or on the remote) for 3 seconds.
- Volume Control: A short press of the encoder knob (front panel) activates the volume control function. Press briefly again to exit.
- Frequency Modulation: After exiting the volume control, the encoder automatically enters frequency modulation mode.
- Ambient Light Selection: Press the encoder knob twice in a row to enter the ambient light selection mode. Press twice in a row to exit.
3.3 Charging
- Connect the USB charging cable to the USB Charging port on the back of the radio.
- The charging indicator will illuminate red during active charging.
- It will switch to green upon reaching full capacity (100%).
- CAUTION: Avoid using fast-charge functions during charging. Displayed voltage metrics should not be solely relied upon for charge confirmation.
3.4 Antenna Connection
The radio comes with a telescopic antenna for general reception. For enhanced performance, especially on LW (Longwave) and MW (Mediumwave) bands, consider using external antennas:
- For LW, a loop antenna is recommended.
- For MW, a ferrite antenna is recommended.
4. Operating Instructions
4.1 Front Panel Controls
- Encoder Knob: Rotates to adjust frequency or menu selections. Short press for volume control, double press for ambient light mode.
- MODE Button: Short press to cycle through reception modes (AUTO, MAN, MEM). Long press for 3 seconds to enter menu settings.
- STA Button: (Station) Likely for station memory or scanning.
- BW Button: (Bandwidth) Short press to switch between stereo and mixed sound. Long press to set bandwidth frequency.
- Power Button (Red): Long press for 3 seconds to turn the radio on or off.
- VOL- / VOL+ Buttons: Adjust volume down and up.
4.2 Remote Control Functions
The dedicated remote control allows for convenient operation from a distance of over 8 meters.
- Power On/Power Off: Turns the radio on or off.
- Mute button: Mutes/unmutes the audio.
- Menu: Accesses the radio's menu settings.
- FM/AM selection: Switches between FM and AM bands.
- OK button: Confirms selections in menus or frequency entry.
- Volume up/down (VOL+, VOL-): Adjusts the audio volume.
- Tuning up/down: Changes the frequency.
- Squelch up/down (SQ+, SQ-): Adjusts the squelch level.
- Bandwidth Settings / Stereo (BW): Adjusts bandwidth or toggles stereo mode.
- Numeric Keypad (0-9): For direct frequency input.
- Confirm Frequency Entry (DX): Confirms the frequency entered via the numeric keypad.
4.3 Mode Selection
Short press the MODE button on the front panel to switch between the following reception modes:
- Automatic Reception (AUTO): The radio automatically scans and locks onto available stations.
- Manual Reception (MAN): Allows for manual tuning of frequencies.
- Channel Storage (MEM): Accesses and manages saved radio channels.
To enter the menu settings interface, press and hold the MODE button for 3 seconds. Use the encoder to navigate and the OK button to confirm. Short press MODE to exit submenus or return to the main settings page.
4.4 Band Switching (AM/FM)
Short press the AM/FM button (on remote) or the corresponding function on the front panel to cycle through:
- Shortwave (SW)
- Mediumwave (MW)
- Longwave (LW)
- FM mode
Long press the AM/FM button to view RDS (Radio Data System) count, then short press to exit.
4.5 Bandwidth Adjustment (BW)
Short press the BW button to switch between stereo and mixed sound output. Long press the BW button to access and set specific bandwidth frequencies for optimal reception.
4.6 Demonstration Video
5. Maintenance
- Keep the radio dry and clean. Avoid exposure to moisture, dust, and extreme temperatures.
- Clean the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- When not in use for extended periods, store the radio in a cool, dry place.
- Avoid dropping or subjecting the radio to strong impacts.
6. Troubleshooting
- Radio does not turn on: Ensure the power button is pressed and held for 3 seconds. Check if the battery is charged or if the USB cable is properly connected.
- No signal or poor reception:
- Extend the telescopic antenna fully.
- Try repositioning the radio to a location with better signal.
- For LW and MW bands, consider using a specialized loop or ferrite antenna.
- Adjust the bandwidth (BW) settings to optimize reception and reduce noise.
- Note that SW, MW, and LW bands can only receive signals in AM mode and may require frequent frequency adjustments.
- Poor sound quality:
- Adjust the bandwidth (BW) settings.
- Ensure the radio is not too close to interfering electronic devices.
- For optimal sound, especially for beginners, start with FM which generally has stronger anti-interference capabilities.
7. User Tips
- The red power button requires a 3-second long press to activate or deactivate the radio.
- Even when connected to power, the radio's LED might not indicate charging status, but it should still function correctly.
- The remote control is designed for durability and ease of use, offering comprehensive control over the radio's functions.
- For optimal reception on LW and MW bands, consider investing in external loop or ferrite antennas.
- If you are new to radio technology, begin by exploring FM stations, as they typically offer more stable reception with less interference.
8. Warranty and Support
This product is covered by a standard manufacturer's warranty. For specific warranty details, please refer to your purchase documentation or contact the seller.
For technical support or inquiries, you may contact:
Email: mayisenlin230908@outlook.com