1. Introduction
This manual provides essential information for the installation and safe use of your new Automatic Transmission Car Gear Shift Knob. Please read all instructions carefully before proceeding with installation or use. This product is designed as a modified part to enhance the visual appeal and feel of your vehicle's interior.
Note: To avoid unnecessary problems, please confirm that the product model is suitable for your vehicle when purchasing. Compare your original product's OEM specifications and appearance with the product images provided.
2. Safety & Warnings
Important Safety Information:
- Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord (if applicable) out of reach of children under 3 years old. Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
3. Product Specifications
| Attribute | Value |
|---|---|
| Product Type | Modified Parts |
| Material | ABS Plastics + PU Leather |
| Item Weight | 0.17kg |
| Item Length | 12cm |
| Item Width | 6cm |
| Item Height | 6cm |
| Inner Diameter | Approximately 12mm |
| External Testing Certification | CCC |
| OEM NO. | Shifter Stick Lever For Mazda 3 5 6 8 MX-5 CX-5 CX-7 CX-9 |
| Model Name | Gear Shift Knob For Suzuki GRAND VITARA SX4 AUTO Swift Wagon |
Product Dimensions
4. Vehicle Compatibility
This gear shift knob is compatible with various automatic transmission models from Suzuki, Mazda, and Mitsubishi. Please verify your vehicle's model and year against the list below:
Suzuki Models:
- GRAND VITARA: 2007, 2008, 2011
- SX4: 2006 - 2016
- AUTO: 2009 - 2016
- Swift: 2005 - 2016
- Suzuki Wagon: 2009
- SGV: 2006G. V
- AGV: 2007
- AGC: 2011
- Suz Gras wit 2.4: 2010 AVT
Mazda Models:
- Mazda 3: 2006, 2007, 2008, 2010, 2011, 2012
- Mazda 5: 2008, 2009, 2010, 2011, 2012, 2013
- Mazda 6: 2003 - 2015
- Mazda 8: 2011, 2012, 2013
- Mazda MX-5: 2010
- Mazda CX-5: 2013, 2014
- Mazda CX-7: 2008, 2014, 2015, 2016
- Mazda CX-9: 2007 - 2013
- Mazda 3 BK: 2007, 2008, 2009
Mitsubishi Models:
- OUTLANDER EX: 2011 - 2021
- ASX: 2012 - 2021
5. Installation Instructions (Setup & Operating)
Important: Installation instruction is NOT included with the product. Professional installation is highly recommended to ensure proper fitment and avoid damage.
This gear shift knob is designed for easy and quick replacement of the original part. The process generally involves removing the old knob and installing the new one.
General Installation Steps:
- Preparation: Ensure your vehicle is parked safely with the engine off and parking brake engaged.
- Remove Old Knob: Carefully remove your old or broken gear shift knob. This typically involves unscrewing, pulling, or releasing a clip mechanism. Refer to your vehicle's specific service manual for precise instructions on removing the original knob.
- Install New Knob: Align the new Malcayang gear shift knob with the shifter lever. Push down firmly and/or twist clockwise until it is securely in place. Ensure the knob is fully seated and does not wobble. The inner diameter of the knob is approximately 12mm, designed for a snug fit.
- Test Functionality: After installation, gently test the gear shift mechanism to ensure smooth operation and proper engagement of all gears.
Visual Examples of Installed Knobs:
6. Maintenance
To ensure the longevity and appearance of your gear shift knob, follow these simple maintenance guidelines:
- Cleaning: Wipe the knob regularly with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the ABS plastic and PU leather finish.
- Protection: Protect the knob from prolonged direct sunlight and extreme temperatures, which can cause fading or material degradation over time.
- Inspection: Periodically check the knob for any signs of looseness or damage. If any issues are found, address them promptly.
7. Troubleshooting
If you encounter any issues with your gear shift knob, consider the following:
- Loose Fit: If the knob feels loose after installation, re-check that it is fully seated and twisted/pushed into place correctly. Ensure the inner diameter matches your vehicle's shifter shaft.
- Difficulty Shifting: If you experience difficulty shifting gears after installation, immediately cease use and re-inspect the installation. A misaligned or improperly installed knob can interfere with the shifter mechanism. Professional inspection is advised.
- Damage: If the knob arrives damaged or becomes damaged during installation/use, do not attempt to repair it if it compromises safety or functionality.
For persistent issues, contact the seller or a qualified automotive professional.
8. User Tips
- Professional Installation: While designed for easy replacement, if you are unsure about the installation process, it is highly recommended to seek professional assistance to ensure correct and secure fitment.
- Aesthetic Enhancement: This product offers a strong visual impact, with details reflecting noble qualities, making your car's interior more elegant.
9. Warranty & Support
This product is manufactured by Guangzhou Yangchi Auto Parts Co. LTD. For any product quality or infringement issues, the manufacturer/importer/seller shall be solely held responsible.
Manufacturer Contact Information:
- Company Name: Guangzhou Yangchi Auto Parts Co. LTD
- Address: CN-2 # 1003 min jie ke chuang, minying ke ji yuan, tai he zhen, baiyun district, Guangzhou
- E-Mail: ouyan99@dingtalk.com
- Telephone: 86-18102513142
EU Authorized Representative:
- Company Name: CET PRODUCT SERVICE LTD
- Address: Osterholzallee 144, 71636 Ludwigsburg Germany
- E-Mail: info.cetservice@gmail.com
- Telephone: +4971416432236
For additional item guides and documents, please refer to the official user manual PDF available here.