1. Introduction
Thank you for choosing the Yeelight Smart LED Pendant Light. This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your new smart lighting fixture. Please read this manual carefully before use and retain it for future reference.

The Yeelight Smart LED Pendant Light features an elegant strip appearance, 280 scientifically arranged lamp beads for soft and uniform light, and professional side-lighting technology. It offers adjustable color temperature (2700K-6000K) and brightness (450lm-1700lm), a high Color Rendering Index (Ra95), and a colorful ambient light halo to create various dining atmospheres. It supports multiple control methods including mobile phone app, voice control, remote control, and wall switch control, and is compatible with smart home systems like Google Home and Mijia. The lamp body is designed to be insect and dust proof for easier maintenance.
2. Safety Warnings
- Voltage Check: Always check the voltage before using this product. Using it under improper voltage may damage the product and cause safety hazards.
- Light Source: The light source is non-user replaceable. The light source contained in this luminaire shall only be replaced by the manufacturer or its service agent or a similarly qualified person.
- Heat Generation: The light will generate heat during operation. Ensure proper ventilation.
- Power Disconnection: The power is not cut off when you turn off the light by Yeelight remote control or Yeelight App. Always cut off the main power before installation, touching, replacing, or disassembling the light to avoid risks of electric shocks, injuries, or even death.
- Installation Location: The pendant light is not recommended to be installed in a position where its ambient light is within sight of 38cm.
- Professional Installation: Ask electricians for installation or maintenance. Wiring shall comply with IEEE Standard or local rules and regulations.
- Grounding: Grounding is a must for safe operation.
3. Package Contents
Ensure all items are present and undamaged before proceeding with installation:
- Yeelight Smart LED Pendant Light (Lamp Body with Cable and Wire Ropes)
- Ceiling Plate
- Wall Anchor (x2)
- Self-tapping Screw (x2)
- Wire Rope (x2)

4. Installation Instructions
4.1. Hole Boring
- Take out the light and all accessories from the package.
- Confirm the desired installation location on the ceiling.
- Bore two holes using an 8mm electric drill. The drilling depth should be at least 40mm. Insert the provided wall anchors into these holes.

4.2. Backboard Fixation
- Screw one self-tapping screw into one wall anchor. Do not tighten it completely; leave a 3mm-5mm clearance.
- Thread the electrical cable out of the silicone sleeve on the back of the ceiling plate and adjust it to the proper length.
- Insert one pre-installed self-tapping screw into the calabash-shaped hole on the ceiling plate, and fix the screw at the narrow side of the hole.
- Screw another self-tapping screw into the other hole to securely fix the backboard to the ceiling.
Warning: Please double check the backboard after installation to prevent it from falling down.

4.3. Wiring
- Strip the cable insulation for 6mm-8mm.
- Connect the zero line, grounding line, and live line as indicated by the marks N, ①, and L respectively. Ensure correct polarity.
- Securely fix the bolts of the wiring terminals.
Important: Grounding is a must! Always cut the power before disassembling this product!

4.4. Ceiling Plate Installation
- Adjust the length of the electrical cable according to the desired suspending height of the wire ropes. Any extra cable can be stored within the ceiling plate.
- Fasten the cover of the ceiling plate.
- Screw the two screwnuts of the wire ropes into the cover of the ceiling plate to securely fix the wire ropes.

4.5. Lamp Body Installation
- Connect the two wire ropes to the lamp body. Adjust the length of the wire ropes freely to achieve the desired hanging height. You can insert the wire ropes or press the joint to extract them for height adjustment.
- Insert the electrical cable into the splayed ring.

5. Operation
5.1. Smart Control
- Download the Yeelight APP from your device's App store.
- Turn on the light. Open the Yeelight App and follow the in-app instructions to connect the light.
Note: Please ensure your Wi-Fi network is available and has internet access. This pendant light also works with the Yeelight Remote Control.

5.2. Features
- Tunable White Light: Adjust color temperature from 2700K (warm) to 6000K (cool).
- Dimmable: Adjust brightness from 450lm to 1700lm.
- Adjustable Height: Suspension wire length can be manually adjusted from 0.5m to 1.5m.
- High CRI: Ra95 color rendering index at 4000K for accurate color reproduction.
- Different Scenes: Pre-set lighting modes for various atmospheres.
- Smart Voice Control: Control your light using voice commands through compatible smart assistants.
- Remote Access: Control your light remotely via the Yeelight App.
- Update Firmware: Keep your light updated with the latest features and improvements via the app.



6. Maintenance
The Yeelight Smart LED Pendant Light features a professional sealing design, making it insect and dust proof. This design simplifies cleaning and prevents accumulation of debris inside the lamp.
- To clean the lamp, ensure the power is off.
- Use a soft, dry cloth to wipe the exterior surfaces.
- Avoid using abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or internal components.
- Do not spray cleaning liquids directly onto the lamp.

7. Troubleshooting
7.1. How to Reset the Light
If you encounter issues with connectivity or need to pair the light with a new network environment, you can reset it:
- Turn the physical switch of the pendant light ON and OFF 5 times consecutively.
- Each ON/OFF cycle should last approximately 2 seconds.
- The light will reset after breathing for 5 seconds, indicating it is ready for a new connection.
7.2. Common Issues
- Light not turning on: Check power supply, ensure wiring is correct, and verify the physical switch is on.
- Cannot connect to App: Ensure your Wi-Fi network is active and has internet access. Try resetting the light as described above. Make sure your phone is on the same 2.4GHz Wi-Fi network during initial setup.
- Inconsistent brightness/color: Ensure the light is not obstructed. If using a dimmer switch, ensure it is compatible or set to full power, as the light has its own dimming capabilities.
8. Specifications
| Parameter | Value |
|---|---|
| Product Name | Yeelight Smart LED Pendant Light |
| Product Model | YLDL01YL |
| Product Color | White |
| Product Material | PC lamp body, PMMA lampshade |
| Rated Power | 33W (280 × 0.093W + 14 × 0.5W/LED) |
| Power Source | AC |
| Rated Input | 220V~240V 50/60Hz 0.16A |
| Power Factor | 0.9 |
| Color Temperature Range | 2700K-6000K adjustable |
| Brightness Range | 450lm-1700lm adjustable |
| Color Rendering Index (CRI) | Whole lamp Ra 95 @4000K |
| Control Method | Mobile phone control, voice control, remote control, wall switch control |
| Wireless Connectivity | Wi-Fi IEEE 802.11 b/g/n 2.4GHz, Bluetooth 4.2 BLE |
| Operating Temperature | -10°C ~ 40°C |
| Operating Humidity | 0%-85%RH |
| Compatible with | Android 4.4 & iOS 9.0 and above |
| Lamp Body Length | 900mm |
| Lamp Body Thickness | 40mm |
| Ceiling Cup Length | 484mm |
| Ceiling Cup Height | 20.5mm |
| Suspension Wire Length | Max 1.5m, Min 0.5m |
| Package Length | 95cm |
| Package Width | 12cm |
| Package Height | 11cm |
| Package Weight | 2.485kg |


9. User Tips
- For optimal smart control, ensure your Wi-Fi router is within a reasonable range of the light fixture.
- Experiment with different color temperatures and ambient light settings to find the perfect mood for various occasions, from bright task lighting to warm, romantic dinners.
- Utilize the adjustable suspension wire to position the light at the ideal height above your dining table for comfortable and glare-free illumination.
- Regularly check the Yeelight App for firmware updates to ensure you have the latest features and performance improvements.
10. Warranty and Support
For customer service, technical support, or warranty inquiries, please contact Yeelight directly.
- Customer Service Email: Support@Yeelight.com
- Manufacturer: Qingdao Yeelink Information Technology Co., Ltd.
- Address: F10-B4, Building B, International Innovation Park, 1 Keyuan Weiyi Rd, Laoshan, Qingdao, Shandong Province, China
- Learn more at: www.yeelight.com