Introduction
This manual provides essential information for the safe and effective use of your VODOOL Kids Motorcycle Safety Belt. This adjustable harness is designed to provide additional security for children riding on motorcycles or electric vehicles with an adult. Please read these instructions carefully before use and retain them for future reference.

Figure 1: Front view of the VODOOL Kids Motorcycle Safety Belt.
Safety Information
WARNING: Failure to follow these safety instructions may result in serious injury or death.
- Always ensure all buckles are securely fastened before starting the motor or vehicle.
- Double-check that the belt is properly adjusted and snug on both the child and the adult.
- Drive slowly and cautiously when a child is on the motorcycle or electric vehicle.
- This harness is an aid to safety and does not replace responsible adult supervision.
- Regularly inspect the harness for any signs of wear, tear, or damage. Do not use if damaged.
- Ensure the child is old enough and physically capable of sitting upright and holding on during the ride.

Figure 2: Proper use of the safety harness with an adult and child on a motorcycle.
Setup and Installation
- Unpack the Harness: Remove the safety belt from its packaging.
- Identify Components: The harness consists of a main belt for the adult, shoulder straps for the child, and adjustable buckles.
- Adult Placement: The adult wears the main belt around their waist.
- Child Placement: The child wears the shoulder straps like a backpack. The child can be positioned either in front of or behind the adult, depending on comfort and vehicle design.
- Connect Harnesses: Connect the child's shoulder straps to the adult's main belt using the designated buckles.
- Adjust Straps: Adjust all straps to ensure a snug but comfortable fit for both the adult and the child. The harness should not be too loose, as this can compromise safety.

Figure 3: Layout of the safety harness components.

Figure 4: Detail of an adjustable buckle.
Operating Instructions
- Secure the Child: Once the child is seated on the motorcycle or electric vehicle, ensure they are wearing the harness correctly and all straps are adjusted.
- Fasten Buckles: Securely fasten all buckles connecting the child's harness to the adult's belt. Listen for a click to confirm engagement.
- Pre-Ride Check: Before starting the vehicle, perform a quick check:
- Are both buckles securely fastened?
- Is the harness snug on both the child and adult?
- Is the child comfortable and able to hold the handles?
- During the Ride: Instruct the child to hold onto the provided handles on the harness for added stability and comfort.

Figure 5: Child secured in the harness from a rear perspective.

Figure 6: Detail of the child's grab handle.
Maintenance
- Cleaning: Hand wash the harness with mild soap and cold water. Do not use harsh detergents or bleach.
- Drying: Air dry completely. Do not tumble dry or expose to direct sunlight for prolonged periods, as this can degrade the material.
- Storage: Store the harness in a cool, dry place away from direct sunlight when not in use.
- Inspection: Before each use, inspect all straps, buckles, and stitching for any signs of wear, fraying, cracks, or damage. If any damage is found, discontinue use immediately.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Harness feels too loose. | Straps are not properly adjusted. | Tighten all adjustable straps until the harness fits snugly on both the adult and child. |
| Buckles are difficult to fasten/unfasten. | Buckles may be misaligned or dirty. | Ensure proper alignment. Clean buckles if dirt or debris is present. Do not force. |
| Child is uncomfortable. | Harness is too tight or improperly positioned. | Adjust straps for comfort. Ensure padding is correctly placed. Re-position the child if necessary. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | Kids Motorcycle Safety Belt |
| Material | Oxford Fabric |
| Adjustability | Adjustable straps for various sizes |
| Application | Motorcycles, Electric Vehicles |
| Color | Black |
| Package Contents | 1x Safety Belt |
For a detailed user manual in PDF format, please refer to the official document: User Manual (PDF)
User Tips
- Many users find the handles helpful for children to hold onto, increasing their sense of security.
- Always perform a final check of all buckles and strap adjustments just before starting your ride.
- The harness is designed to be adjustable for various child sizes, making it versatile for growing children.
- Consider practicing with the harness in a stationary position before your first ride to ensure both adult and child are comfortable.
Warranty and Support
This product is manufactured to high-quality standards. For any questions regarding product functionality, maintenance, or support, please contact the seller or manufacturer directly. Keep your purchase records for warranty claims.