Important Notes Before Installation
Please read the following information carefully before proceeding with installation to ensure proper fitment and avoid potential issues.
-
Compatibility Verification: The years and models listed are for reference only. Vehicle configurations can vary. To ensure correct fitment, please contact customer service with your Vehicle Identification Number (VIN) to confirm compatibility before installation. Returns or refunds may not be accepted if the product cannot be used due to failure to verify compatibility in advance.
Figure 1: Compatibility Chart for BMW E60 5 Series (2008-2010)
- Product Quality: This product is available in 'Standard quality' and 'High quality' variants. High-quality products typically feature superior materials, leading to enhanced performance in terms of hardness, gloss, sealing, corrosion resistance, precision, and lifespan. They also utilize improved packaging to minimize transit damage.
For a detailed user manual in PDF format, please refer to the official PDF manual.
Product Overview
This tail light assembly is designed as a direct replacement for the original tail lights on BMW E60 5 Series vehicles manufactured between 2008 and 2010. It integrates turn signal, stop brake light, and reverse lamp functions into a single unit.
Specifications
| Feature | Detail |
|---|---|
| Item Type | Tail Light Assembly |
| Special Features | Tail Light, Rear Bumper, Turn Signal, Stop Brake Light, Reverse Rear Lamp |
| Color (Light Emission) | Red |
| Model Name / OEM NO. | 63217177281 (Left), 63217177282 (Right) |
| Material | ABS |
| Origin | Mainland China |
| Applicable Chassis Code | E60 |
| Applicable Model | BMW 5 Series |
| Applicable Year Range | 2008-2010 |
| Package Dimensions (L x W x H) | 63 cm x 32 cm x 20 cm |
| Package Weight | 2.7 kg |
Setup and Installation
Installation of automotive lighting components can be complex. Professional installation is highly recommended. If you choose to install it yourself, proceed with caution and ensure you have the necessary tools and expertise.
Safety Precautions:
- Always disconnect the vehicle's battery before starting any electrical work to prevent short circuits or electrical shock.
- Wear appropriate personal protective equipment (PPE), such as gloves and eye protection.
- Ensure the vehicle is parked on a level surface and the parking brake is engaged.
Installation Steps (General Guide):
- Access the Tail Light: Open the trunk and locate the access panel or trim covering the rear of the tail light assembly. Remove any fasteners (screws, clips, etc.) securing the panel.
- Disconnect Wiring: Carefully disconnect the electrical connector(s) from the existing tail light assembly. There may also be ground wires or other connections.
- Remove Old Tail Light: Unfasten the bolts or nuts that secure the tail light assembly to the vehicle body. Gently pull the old tail light assembly away from the vehicle. Be mindful of any remaining clips or alignment pins.
Figure 5: Example of Tail Light Installed on Vehicle
- Install New Tail Light: Position the new tail light assembly into the opening, ensuring all alignment pins and mounting points match. Secure it with the previously removed bolts or nuts. Do not overtighten.
- Connect Wiring: Reconnect the electrical connector(s) to the new tail light assembly. Ensure connections are secure and fully seated.
- Test Functionality: Reconnect the vehicle's battery. Test all tail light functions: parking lights, brake lights, turn signals, and reverse lights. Ensure they operate correctly and without error messages on the dashboard.
- Reassemble: Reinstall any removed trim panels or covers.
Operating Instructions
This tail light assembly operates automatically in conjunction with your vehicle's electrical system. No manual operation is required for the tail light unit itself.
- Parking Lights: Activate when the vehicle's headlights or parking lights are turned on.
- Brake Lights: Illuminate when the brake pedal is pressed.
- Turn Signals: Flash when the turn signal lever is engaged (left or right).
- Reverse Lights: Illuminate when the vehicle is shifted into reverse gear.
Ensure all functions are working correctly after installation and periodically check for proper operation.
Maintenance
- Cleaning: Clean the outer lens of the tail light with a soft cloth and mild automotive cleaning solution. Avoid abrasive cleaners or harsh chemicals that could damage the lens material.
- Inspection: Periodically inspect the tail light assembly for any signs of damage, cracks, moisture intrusion, or loose connections. Address any issues promptly.
- Bulb Replacement: This unit typically uses integrated LED components, which are not user-replaceable. If individual light functions fail, the entire assembly may need replacement. Consult a professional if you suspect a fault.
Troubleshooting
Common Issues and Solutions:
- Light Not Working:
- Check electrical connections at the back of the tail light for looseness or corrosion.
- Verify the vehicle's fuse for the tail lights is intact.
- Ensure the vehicle's battery is properly connected and charged.
- Flickering Lights:
- Inspect wiring for loose connections or damaged insulation.
- Could indicate a faulty ground connection.
- Error Message on Dashboard:
- Some vehicles may detect aftermarket parts and display a bulb-out warning. This may require coding or a resistor to resolve, depending on the vehicle's sensitivity. Consult a BMW specialist.
- Ensure the correct 'quality' variant (standard/high) was installed if it affects electrical compatibility.
- Moisture Inside Lens:
- Check for proper sealing around the tail light assembly and ensure it is securely mounted.
- Small amounts of condensation can be normal and dissipate, but persistent moisture indicates a leak.
If troubleshooting steps do not resolve the issue, it is recommended to seek assistance from a qualified automotive technician.
User Tips
- Professional Installation: For optimal results and to avoid potential electrical issues, consider having the tail light assembly installed by a certified mechanic.
- Regular Checks: Periodically check all lighting functions (turn signals, brake lights, reverse lights) to ensure they are working correctly, especially before long journeys.
- Cleanliness: Keep the tail light lenses clean to ensure maximum light output and visibility.
Warranty and Support
For any product-related issues, including warranty claims or technical support, please contact the seller, Auto Source Factory Store, directly through the platform where the purchase was made. Ensure you have your order details readily available.
Refer to the official PDF manual for additional information: User Manual (PDF)