BOAYAL T01/T02 Series

Contents

BOAYAL Self-Leveling Laser Level

T01 (Red Beam) / T02 (Green Beam) Series User Manual

Model: T01/T02 | Brand: BOAYAL

1. Introduction

Thank you for choosing the BOAYAL Self-Leveling Laser Level. This precision measuring tool is designed to project bright horizontal, vertical, and cross-line laser beams for various alignment and leveling tasks in construction, home improvement, and DIY projects. This manual provides essential information for safe and effective use of your laser level. Please read it thoroughly before operation and keep it for future reference.

2. Safety Information

WARNING: LASER RADIATION. DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT.

  • Never look directly into the laser beam or project it directly into the eyes of others.
  • Do not disassemble the laser level. Repairs should only be performed by authorized service personnel.
  • Keep the device out of reach of children.
  • Use only specified batteries (4xAA). Ensure correct polarity when inserting.
  • Avoid operating the device in explosive atmospheres or near flammable liquids/gases.
  • Protect the device from moisture and direct sunlight.

3. Package Contents

Upon unpacking, please ensure all items listed below are present and in good condition:

  • 1 x BOAYAL Self-Leveling Laser Level (T01 Red Beam or T02 Green Beam)
  • 1 x Magnetic Bracket
  • 1 x Soft Carrying Bag
  • 1 x User's Manual (This document, and a more detailed PDF version is available online)
Image of the laser level, magnetic bracket, soft carrying bag, and user manual in its packaging.
Figure 3.1: Contents of the BOAYAL Laser Level package.

4. Specifications

The BOAYAL T01 (Red Beam) and T02 (Green Beam) laser levels offer distinct characteristics:

Comparison table of T01 Red Beam and T02 Green Beam laser levels, showing wavelength, working distance, working time, leveling accuracy, expansion angle, power source, laser class, operating temperature, storage temperature, and size.
Figure 4.1: Detailed specifications for T01 (Red Beam) and T02 (Green Beam) models.
General Specifications
Attribute Specification
Brand Name BOAYAL
Model Number T01 02
Measurement Model 2 lines (Vertical & Horizontal Lasers)
Laser Wavelength T01: 630-670nm (Red Beam), T02: 505-550nm (Green Beam)
Precision ±3mm/10m
Automatic Level Range ±4°
Protection Level IP54
Operating Temperature -10℃~50℃
Storage Temperature -25℃~70℃
Laser Class Class 2
Size 92*84*58mm
Power Source 4 x AA Batteries (not included)

5. Setup

5.1. Battery Installation

  1. Locate the battery compartment cover on the back or bottom of the device.
  2. Open the cover by sliding or unlatching it.
  3. Insert 4 AA batteries, ensuring the correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery compartment cover securely.
Image showing the battery compartment of the laser level with four AA batteries being inserted, indicating power convenience and extra long standby.
Figure 5.1: Battery installation in the 4xAA battery compartment.

5.2. Mounting the Laser Level

The laser level can be used freestanding on a stable surface or mounted for more precise positioning:

  • Magnetic Bracket: Attach the magnetic bracket to the laser level. The bracket can then be affixed to metallic surfaces or used with a clamp for versatile positioning.
  • Tripod Mount: The device features a 1/4" tripod mount on its base, allowing it to be securely attached to standard tripods or other mounting accessories.
Image illustrating how to connect the laser level to a tripod using the 1/4 inch tripod mount, showing various tripod and clamp accessories.
Figure 5.2: Connecting the laser level to a tripod via the 1/4" tripod mount.

6. Operation

6.1. Power On/Off and Mode Selection

The laser level features a single button operation for ease of use:

  1. Power On: Slide the mechanical switch (usually located on the side or front) to the 'ON' position. The device will automatically enter self-leveling mode and project laser lines.
  2. Mode Selection: Press the power button (often on top) to cycle through the three laser-line modes: Cross lines (horizontal + vertical), Horizontal line only, or Vertical line only.
  3. Power Off: Slide the mechanical switch back to the 'OFF' position. This also locks the pendulum for safe transport.
Diagram showing the laser level with two laser modules, illustrating how it outputs horizontal, vertical, and cross lines.
Figure 6.1: The two laser modules enable output of horizontal, vertical, and cross lines.
Image illustrating the dual-mode transmitter and diagonal pattern feature, showing the mechanical switch for locking.
Figure 6.2: Dual-mode transmitter and mechanical switch for diagonal pattern (slash mode).

6.2. Self-Leveling Function

The device automatically self-levels within a range of ±4°. When the tool is placed on an uneven surface and the inclination angle is within this range, the laser lines will automatically adjust to be level. If the inclination angle exceeds 4°, the laser lines will blink, and an indicator light (usually red) will turn on to alert you that the device is out of level. Adjust the position of the laser level until the lines stop blinking and the indicator turns green (or off, depending on the model).

Diagram showing the self-leveling range of ±4 degrees with indicator lights (red for out of level, green for level).
Figure 6.3: Self-leveling mechanism and indicators.
Image illustrating automatic leveling, showing the laser level tilting and the laser line blinking when the tilt angle exceeds 4 degrees.
Figure 6.4: Automatic leveling in action, with visual cues for out-of-level conditions.

6.3. Slash Mode / Manual Mode

To project laser lines at any angle (e.g., for stair railings or decorative patterns), engage the 'Slash Mode' or 'Manual Mode'. This is typically done by locking the pendulum (sliding the mechanical switch to the 'OFF' position) while the device is powered on. In this mode, the self-leveling function is deactivated, and the laser lines can be projected at any desired angle. The laser lines may blink periodically to indicate that the self-leveling function is not active.

6.4. Applications

The BOAYAL laser level is suitable for a wide range of applications:

  • Wall construction and framing
  • Laying tiles on floors and walls
  • Installing cabinets and shelves
  • Hanging pictures and artwork
  • General alignment and leveling tasks
Collage of images showing various applications of the laser level, including construction of walls, laying of tiles, furniture installation, and installation of photos and paintings.
Figure 6.5: Versatile applications of the laser level.
Three images depicting household decoration projects: mounting items on a wall, door and window installation, and wall construction, all using the laser level for guidance.
Figure 6.6: Examples of household decoration projects where the laser level is useful.

7. Maintenance

  • Cleaning: Use a soft, damp cloth to clean the device. Do not use abrasive cleaners or solvents.
  • Storage: When not in use, store the laser level in its soft carrying bag in a dry, cool place, away from direct sunlight. Ensure the pendulum is locked (power switch in 'OFF' position) to prevent damage during transport or storage.
  • Battery Replacement: Replace batteries when the laser lines dim or the device fails to power on. Always replace all 4 AA batteries at the same time.
  • Calibration: If you suspect the accuracy of your laser level has been compromised, refer to the detailed PDF manual for calibration instructions or contact customer support.

8. Troubleshooting

Problem Possible Cause Solution
Laser lines are dim or not visible. Low batteries; Bright ambient light. Replace batteries; Use in lower light conditions or closer to the surface.
Laser lines are blinking and/or red indicator is on. Device is out of self-leveling range (inclination > ±4°). Place the device on a more level surface until the lines stabilize and indicator turns off/green.
Laser lines are not accurate. Device dropped or improperly stored; Needs calibration. Perform a calibration check (refer to PDF manual) or contact support.
Device does not power on. No batteries; Incorrect battery installation; Faulty unit. Check and replace batteries; Ensure correct polarity; Contact customer support.

9. User Tips

  • For best visibility, especially with red beams, use the laser level in dimly lit environments or indoors. Green beams generally offer better visibility in brighter conditions.
  • Always lock the pendulum (switch to 'OFF' position) before moving or storing the device to protect the internal components.
  • When working on a diagonal line, remember that the self-leveling feature is off, so ensure the device is stable and set at the desired angle manually.
  • Consider using a laser target plate for enhanced visibility over longer distances or in bright conditions.

10. Warranty and Support

For detailed warranty information and customer support, please refer to the official BOAYAL website or contact your retailer. A comprehensive user manual in PDF format, including calibration procedures and additional language options, can be downloaded from the following link: BOAYAL Laser Level User Manual (PDF).

© 2024 BOAYAL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.