1. Introduction
Thank you for choosing the TELETHINKING FT01 Multifunctional Fitness Timer. This device is designed to enhance your fitness training with a variety of timing modes, a large LED display, and convenient remote control operation. Please read this manual thoroughly before use to ensure proper operation and to maximize your training efficiency.
Figure 1: TELETHINKING FT01 Multifunctional Fitness Timer
2. Important Safety Warnings
- This product is intended for indoor use only.
- The device is not waterproof. Avoid exposure to water or high humidity.
- Keep the timer away from high temperatures and direct sunlight to prevent damage.
- Ensure the power adapter's output voltage matches the required 5V for the timer.
- The remote control requires 2 AAA batteries (not included).
3. Package Contents
Please check the box for the following items:
- Fitness Timer FT01 (1 unit)
- Remote Control (1 unit)
- USB Cable (1 unit)
- Sling (1 unit)
- Strong Sticker Hooks (2 units)
- User Manual (this document, also available as a PDF: User Manual PDF)
- Packaging Box
Figure 2: Standard Item Package Contents
4. Product Overview
The FT01 Fitness Timer is equipped with a large LED display and a wireless remote control for versatile use in various fitness settings.
4.1 Key Features
- Multiple Built-In Training Modes: Includes EMOM, TABATA, FGB, BEAT, stopwatch, count-up/down, and custom interval mode.
- Large LED Display: High-visibility digits with 40mm font height and a clear viewing distance of up to 20 meters.
- Adjustable Brightness: Five brightness levels for optimal visibility in different lighting conditions.
- Wireless Remote Control: Control the timer remotely up to 10 meters, allowing for seamless adjustments during workouts.
- Four-Level Volume: Audible cues help maintain training rhythm and signal transitions.
- Durable Build & Multiple Placement Options: Features an aluminum alloy frame and can be placed on a surface, wall-mounted, or attached with adhesive hooks.
Figure 3: Adjustable Brightness and Volume
4.2 Remote Control Layout
Familiarize yourself with the remote control buttons for easy operation:
Figure 4: Remote Control Button Functions
- ON/OFF: Power on/off or enter/exit standby mode.
- UP/DOWN: Navigate menus or adjust values.
- VOL +/-: Adjust volume.
- BRIGHTNESS +/-: Adjust display brightness.
- CLOCK: Enter clock mode.
- 12/24: Switch between 12-hour and 24-hour clock formats.
- SHOW: View custom timing settings.
- START/STOP: Start, pause, or stop timing.
- OK: Confirm selection or save settings.
- RESET: Reset current mode or clear stopwatch.
- SET: Enter setup mode for various functions.
- EMOM/TABATA/FGB/BEAT: Directly access respective training modes.
- Number Keys (0-9): Input values or access custom timing groups (P0-P9).
5. Setup
5.1 Powering On
Connect the timer to a 5V power source using the provided USB cable. The timer will power on automatically. Press the ON/OFF button on the remote to enter standby mode, and press it again to resume operation.
5.2 Remote Control Battery Installation
The remote control requires 2 AAA batteries (not included). Open the battery compartment on the back of the remote and insert the batteries, ensuring correct polarity.
5.3 Installation Methods
The FT01 timer offers flexible placement options:
- Place: Position the timer freely on any flat surface.
- Hang: Utilize the hanging hole on the back of the timer to mount it on a wall.
- Adhesive Hooks: Use the provided strong sticker hooks for a drill-free wall mounting solution. These hooks are suitable for smooth, flat surfaces.
Figure 5: Product Dimensions
6. Operation
6.1 Target Timer (Count-Up)
- Press the UP button to enter target timing mode.
- Press SET to start configuring the target time.
- Use the UP/DOWN buttons to navigate between settings and the number keys to input values.
- Once settings are complete, press OK to save and exit the menu.
- Press START/STOP to begin timing, press again to pause.
- Press RESET to revert to the preset time.
6.2 Countdown Timer
- Press the DOWN button to enter countdown mode.
- Use SET to configure the countdown time.
- Navigate between settings with UP/DOWN and input values using the number keys.
- Once configured, press OK to save your settings and exit the menu.
- Press START/STOP to begin timing, press again to pause.
- Press RESET to revert to the preset time.
6.3 Stopwatch
- Press the STOP-W button to enter stopwatch mode.
- Press START/STOP to begin timing, press again to pause.
- Press RESET to clear the stopwatch.
6.4 Clock
- Press the CLOCK button to enter clock mode.
- Use the 12/24 button to switch between 12-hour and 24-hour formats. Note: Select the desired format before entering setup.
- Press SET to enter setup mode. Navigate between settings with UP/DOWN and input values using the number keys.
- When finished, press OK to save your changes and exit setup.
- In 12-hour mode, press the 12/24 button to switch between morning (A) and afternoon (P).
Figure 6: 12/24H Real-Time Clock
6.5 EMOM Timing (Every Minute On the Minute)
This mode uses a fixed 1-minute repeating countdown (cannot be adjusted) and supports up to 99 cycles (displayed as L99).
- Press the EMOM button to enter EMOM timing mode.
- Use START/STOP to begin the cycle, press again to pause.
- Press RESET to revert to the preset 1-minute timer.
Figure 7: EMOM and TABATA Modes in Action
6.6 TABATA Timing
This mode has a preset work interval (F) of 20 seconds and a rest interval (C) of 10 seconds, repeated for 8 cycles (8 rounds of 20s work + 10s rest).
- Press the TABATA button to enter TABATA mode.
- Use START/STOP to start or stop timing.
- Press RESET to reset to the preset intervals.
6.7 FGB Timing (Fight Gone Bad)
The FGB mode offers two preset sequences:
- FGB1: Work interval (F): 5 minutes; rest interval (C): 1 minute. Repeat 5 cycles.
- FGB2: Work interval (F): 5 minutes; rest interval (C): 1 minute. Repeat 3 cycles.
- Press the FGB button to enter FGB timing mode.
- Press FGB again to switch between FGB1 and FGB2.
- Press START/STOP to start or stop timing.
- Press RESET to revert to the preset intervals.
Figure 8: FGB1 & FGB2 Dual Preset Modes
6.8 Beat Function
- Press the BEAT button to enter the beat mode (display: BE X XX).
- Use the LEFT/RIGHT buttons to adjust the beat frequency (range: 5-320 beats per minute, values are multiples of 5).
- Press START/STOP to start or stop timing.
- Press RESET to revert to the preset frequency.
6.9 User-defined Cyclic Timing (P0-P9)
This mode allows you to create and store up to 10 custom timing groups (P0-P9).
- Access a custom timing group by pressing its corresponding number key (0-9) directly.
- Use the SHOW button to view the current timing parameters.
- Press the SET button to adjust the parameters for the active group:
- F (F1-F8): Work interval
- C (C1-C8): Rest interval
- L (L1-L99): Number of cycles
6.9.1 Fixed Work & Rest Intervals Example (Group P1)
Example: For a 5-minute work interval, 1-minute rest interval, and 3 repetitions, set it as F1 05:00 C1 01:00 L03.
- Press the 1 button (for Group P1) - the timer will display "P1".
- Press the SET button - the timer will display "F1 XX:XX". Use the number keys to set your desired work interval (e.g., 05:00).
- Press the SET button - the timer will display "C1 XX:XX". Use the number keys to set your desired rest interval (e.g., 01:00).
- Press the OK button - the timer will display "LXX:XX". Use the number keys to set the number of repetitions (e.g., 03).
- Press the OK button to save and exit setup - the timer will return to display "P1".
- Press START/STOP to start timing or suspend timing, and RESET to reset to the preset time.
Figure 9: Custom Interval Mode Setup
6.9.2 Variable Work & Rest Intervals Example (Group P2)
Example: Set 3 interval pairs (1 min work, 10s rest; 2 min work, 20s rest; 2 min work, 1 min rest) and repeat the entire sequence 10 times.
- Press the 2 button (for Group P2) - the timer will display "P2".
- Press the SET button - the timer will display "F1 XX:XX". Use number keys to set the 1st work interval (e.g., 01:00).
- Press SET again - the timer will display "C1 XX:XX". Use number keys to set the 1st rest interval (e.g., 00:10).
- Repeat steps for F2, C2, F3, C3, etc., as needed for your variable intervals.
- Press the OK button - the timer will display "LXX". Use the number keys to set the total repetitions for the sequence (e.g., 02).
- Press the OK to save settings. Use START/STOP to start timing (press again to pause), and press RESET to revert to the preset intervals.
Note: The settings will be saved to the selected group (e.g., Group 1 or 2). You can quickly start timing by pressing the corresponding number key and then START/STOP.
7. Specifications
| Feature | Detail |
|---|---|
| Product Model | FT01 |
| Visual Range | <20m |
| Operation Method | Remote Control |
| Installation Method | Place/Hang |
| 12/24-Hour Clock Format | Yes |
| Fitness Training Modes | EMOM, TABATA, FGB, BEAT, Custom Interval |
| Count-Up/Down & Stopwatch Functions | Yes |
| Training/Rest Cycle Timing | Yes |
| Customizable Training/Rest Durations | Yes |
| Overall Dimensions | 290*75*26mm |
| Font Height | 40mm |
| Power Supply | 5V (via USB cable) |
| Remote Control Battery | 2 x AAA batteries (not included) |
Figure 10: Product Specifications Summary
8. Maintenance
- Clean the timer's display and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the USB port and cable are free from dust and debris.
- If storing the timer for an extended period, remove the batteries from the remote control to prevent leakage.
9. Troubleshooting
- Timer does not power on:
- Ensure the USB cable is securely connected to both the timer and a working 5V power source.
- Remote control is not working:
- Check if the AAA batteries are correctly inserted and not depleted. Replace if necessary. Ensure there are no obstructions between the remote and the timer.
- Display is dim or unreadable:
- Adjust the brightness using the BRIGHTNESS +/- buttons on the remote control.
- No sound from the timer:
- Adjust the volume using the VOL +/- buttons on the remote control.
10. User Tips
- For optimal visibility, position the timer at eye level and adjust brightness according to ambient light.
- Experiment with the different training modes to find what best suits your workout routine.
- Utilize the custom interval mode (P0-P9) to save your favorite complex workout sequences for quick access.
11. Frequently Asked Questions (FAQ)
- Q: Is the timer battery-operated?
- A: The timer itself is plug-in (5V via USB cable). Only the remote control requires 2 AAA batteries.
- Q: Can I use this timer outdoors?
- A: This timer is designed for indoor use only and is not waterproof. Outdoor use is not recommended.
- Q: How far can the remote control work?
- A: The wireless remote control has an effective range of up to 10 meters (approximately 33 feet).
12. Warranty and Support
This product comes with a standard manufacturer's warranty. For warranty claims, technical support, or service inquiries, please refer to the contact information provided by your retailer or on the product packaging. Keep your purchase receipt as proof of purchase.