LAUNCH CRP808

Contents

LAUNCH CRP808 X431 OBD2 Scanner Car Diagnostic Tool User Manual

Model: CRP808 | Brand: LAUNCH

1. Introduction

The LAUNCH CRP808 is a professional automotive diagnostic tool designed to provide comprehensive system-wide diagnostics and essential service functions for a wide range of vehicles. This manual provides detailed instructions on how to set up, operate, and maintain your CRP808 device.

2. Safety Information

Please read and understand all safety instructions before using the device to prevent personal injury or damage to the vehicle or the tool.

  • Always perform automotive testing in a safe environment.
  • Wear safety eye protection that meets ANSI standards.
  • Keep clothing, hair, hands, tools, test equipment, etc., away from all moving or hot engine parts.
  • Operate the vehicle in a well-ventilated work area; exhaust gases are poisonous.
  • Put blocks in front of the drive wheels and never leave the vehicle unattended while running tests.
  • Use extreme caution when working around the ignition coil, distributor cap, ignition wires, and spark plugs. These components create hazardous voltages when the engine is running.
  • Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
  • Do not connect or disconnect any test equipment while the ignition is on or the engine is running.

3. Package Contents

Verify that all items are present in your package:

  • CRP808 Handset
  • OBD II Diagnostic Cable
  • DC 5V Charging Cable
  • User Manual (this document)
  • Padded Carrying Case
Image showing the CRP808 device, OBD cable, charging cable, user manual, and carrying case as part of the packing list.
Figure 3.1: CRP808 Packing List

4. Product Overview

The CRP808 is a handheld diagnostic tool featuring a 5-inch IPS touchscreen. It runs on Android 7.0 with an A5 quad-core processor and 8GB ROM, ensuring high-speed diagnostics and feedback.

Front and back view of the CRP808 diagnostic tool, showing its buttons and ports.
Figure 4.1: CRP808 Device Overview
Close-up of the CRP808 5-inch touchscreen display, highlighting its size.
Figure 4.2: 5-inch Touchscreen Display

5. Setup

5.1 Initial Power On and Language Selection

  1. Press and hold the power button to turn on the device.
  2. Follow the on-screen prompts to select your preferred language. The device supports English, French, Spanish, Russian, Japanese, German, Italian, Portuguese, and Korean.
  3. Set the correct timezone and connect to a Wi-Fi network for updates.
CRP808 screen showing multi-language support options including English, French, Spanish, Russian, Japanese, German, Italian, Portuguese, Korean.
Figure 5.1: Multi-language Support Interface

5.2 Connecting to the Vehicle

  1. Locate the vehicle's OBD-II port (usually under the dashboard on the driver's side).
  2. Connect the provided OBD II diagnostic cable to the CRP808 device and then to the vehicle's OBD-II port.
  3. Turn the vehicle's ignition to the ON position (engine off or running, depending on the test).
Image showing OBD2 and OBD1 connectors, emphasizing the CRP808 comes with an OBD2 cable.
Figure 5.2: OBD Connectors (CRP808 includes OBD2 cable)

6. Operating Instructions

6.1 Full System Diagnostic Functions

The CRP808 supports system-wide basic diagnostic functions for over 56 car brands (from 1992 onwards), including:

  • Read DTC (Diagnostic Trouble Codes): Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) codes.
  • Clear DTC (Diagnostic Trouble Codes): Clears Diagnostic Trouble Codes and resets monitors.
  • Read Data Stream: Displays live data of the vehicle's various systems.
  • I/M Readiness: Checks the readiness of the emission system.
  • View Freeze Frame: Displays the vehicle's operating conditions at the time an emission-related fault is detected.
  • Evap System Test: Initiates a test of the evaporative emission system.
CRP808 device displaying diagnostic functions and key advantages like full system diagnostics and Wi-Fi updates.
Figure 6.1: Powerful Scan Tool Features

6.2 Special Functions

The CRP808 includes 5 common useful service and reset functions:

  • ABS Bleeding: Performs various bi-directional tests to check the operating conditions of the Anti-lock Braking System.
  • Injector Coding: Codes new injector numbers to the ECU for accurate communication and control.
  • Throttle Adaptation: Initializes the throttle actuators to the default state for regulating throttle (or idle engine) operations accurately.
  • TPMS Reset: Resets the Tire Pressure Monitoring System.
  • DPF Regeneration: Manages Diesel Particulate Filter regeneration.
Graphic illustrating the 5 special functions: ABS Bleeding, Oil Reset, Electronic Throttle Relearn, Battery Reset, TPMS Reset, Injector Coding, DPF Regeneration.
Figure 6.2: Special Functions Overview
Icons representing various full diagnostic functions including Engine, ABS, AT, SRS, EPB service, TPMS, I/M Readiness, View Freeze Frame, Live Data, Oil Reset, BAT Reset, Injector Code.
Figure 6.3: Full Function Icons

6.3 Supported Car List (from 1992 - now)

The CRP808 supports a wide range of car manufacturers, including but not limited to:

  • Acura, Audi, Abarth, Alfa Romeo, BMW, Bugatti, Buick, Chrysler, Cadillac, Citroen, Chevrolet, Daewoo, Dodge, Dacia, Fiat, Ford, EU Ford, AU Ford, G-M, Gmsa, Holden, Honda, Hyundai, Infiniti, Isuzu, Jeep, Jaguar, Kia, Lincoln, Lancia, Landrover, Lexus, Mazda, Mercedes-Benz, Mini, Mitsubishi, Nissangtr, Nissan, Opel, Porsche, Peugeot, Renault, Renault Samsung, Subaru, Skoda, Smart, Saab, Suzuki, Seat, Sprinter, Tlisuzu, Toyota, V-W, Volvo, Vauxhall.
Screenshots of the CRP808 interface showing a list of supported car brands for diagnosis.
Figure 6.4: Supported Car Brands Interface

6.4 Diagnostic Report and Sharing

The device can generate a professional diagnostic report. You can print this report by sharing it to a PC.

Video 6.1: Demonstration of scrolling through a diagnostic report on the CRP808 device.

7. Maintenance

7.1 Software Updates

The CRP808 features one-click Wi-Fi online updates. Ensure your device is connected to a stable Wi-Fi network to download the latest software and vehicle data. Regular updates ensure compatibility with new vehicle models and improved diagnostic capabilities.

7.2 Cleaning and Storage

  • Clean the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Store the device in its padded carrying case when not in use to protect it from dust and physical damage.
  • Keep the device away from extreme temperatures and direct sunlight.

8. Troubleshooting

If you encounter issues with your CRP808, refer to the following common problems and solutions:

Problem Possible Cause Solution
Device does not power on Low battery; faulty charging cable; device malfunction. Charge the device fully. Check the charging cable. If problem persists, contact support.
Cannot connect to vehicle Loose OBD-II connection; vehicle ignition off; incompatible vehicle protocol. Ensure cable is securely connected. Turn ignition ON. Verify vehicle compatibility.
Software update fails Unstable Wi-Fi connection; insufficient storage. Ensure strong Wi-Fi signal. Free up device memory if needed. Try updating again.
Slow operation/response Too many applications running; low memory. Close unnecessary applications. Restart the device.

9. Specifications

Feature Detail
System Android 7.0
Processor A5 Quad-core
ROM 8GB
Battery 4000mAh
Display 5-inch IPS Touch Screen
Screen Resolution 1280x720
Input Voltage 9~18V (OBD II interface) / 5V (DC)
Storage Temperature -20 °C ~ 70 °C
Working Temperature -10 °C ~ 50 °C
Dimensions (L x W x H) 248.7 x 93.5 x 36 mm (9.4 x 3.7 x 1.5 inches approx.)
Item Weight 1.5 kg
Material Plastic
External Testing Certification CE
Diagram showing the dimensions of the CRP808 device in millimeters and inches.
Figure 9.1: Technical Parameters Diagram

10. User Tips

  • Always keep the device's software updated to ensure the broadest vehicle compatibility and access to the latest features.
  • Before performing any diagnostic or service function, ensure the vehicle's battery is adequately charged to avoid interruptions.
  • For complex diagnostic issues, consider consulting the official user manual PDF for more in-depth information.
  • The device has limited memory; select only the functions you need to download to optimize performance.

11. Warranty and Support

The LAUNCH CRP808 comes with a 1-year warranty and 1 year of free online updates.

For further assistance, technical support, or warranty claims, please refer to the official LAUNCH support channels or the seller from whom you purchased the device.

A detailed user manual in PDF format is available for download: View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.