amagi DLP4006B/93

Contents

amagi DLP4006B/93 Dual Port Car Charger User Manual

Models: 66W, 100W, 200W Variants

1. Important Safety Information

Please read all instructions carefully before using this product. Failure to follow these instructions may result in damage to the product, your device, or your vehicle.

  • Do not overload: Ensure the total power draw of connected devices does not exceed the charger's maximum output.
  • Observe safe operating procedures: Do not operate the charger if it appears damaged.
  • Avoid dropping: Dropping the charger may cause internal damage.
  • Keep out of reach of children: This product is not a toy.
  • Operating Temperature: Use the charger within normal vehicle cabin temperatures.

2. Product Overview

The amagi DLP4006B/93 is a compact, high-power dual-port car charger designed for fast charging of mobile devices in your vehicle. It features both USB-A and USB-C output ports and supports multiple fast charging protocols.

amagi Dual Port Car Charger with 200W label and fast charging protocol icons

Figure 1: amagi Dual Port Car Charger (200W variant shown)

Compact mini car charger held between fingers

Figure 2: Compact and mini design

3. Setup and Installation

  1. Inspect the Charger: Before first use, visually inspect the charger for any signs of damage. Do not use if damaged.
  2. Locate Vehicle Power Socket: Identify your vehicle's 12V-24V cigarette lighter or power accessory socket.
  3. Insert Charger: Firmly insert the amagi car charger into the vehicle's power socket. The charger features snap-in shrapnel contacts for a stable and reliable connection.
Car charger with pull ring design inserted into vehicle socket

Figure 3: Charger inserted into vehicle socket, showing pull-ring design

Diagram showing snap-in shrapnel contacts for stable connection

Figure 4: Stable connection mechanism

4. Operating Instructions

  1. Connect Your Device: Use a compatible USB charging cable (not included) to connect your mobile device to either the USB-A or USB-C port on the car charger.
  2. Fast Charging: The charger automatically detects your device's charging requirements and delivers optimal power. It supports various fast charging protocols including PD3.0, QC4.0, QC3.0, SCP, and PPS.
  3. Dual Device Charging: You can charge two devices simultaneously. The total output for simultaneous charging is 24W. For optimal fast charging, use one port at a time, which can deliver up to 30W per port (depending on the charger variant and device).
  4. Compatibility Note: This product supports 30W fast charging for universal devices, except for devices using the VOOC charging protocol and all OnePlus devices.
  5. Removal: To remove the charger, use the integrated pull-ring design for easy extraction from the socket.
Close-up of USB-C and USB-A output ports

Figure 5: Dual USB-A and USB-C output ports

Two phones charging simultaneously from the car charger

Figure 6: Dual port fast charging (single port max 30W)

iPhone 12 charging with PD fast charging protocol

Figure 7: Support for iPhone 12 series PD fast charging

5. Maintenance

  • Cleaning: Use a dry, soft cloth to clean the charger. Do not use liquid cleaners or aerosols.
  • Storage: When not in use, store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid Physical Damage: Do not drop, disassemble, or attempt to modify the charger.

6. Troubleshooting

  • Charger Not Functioning:
    • Ensure the charger is fully inserted into the vehicle's power socket.
    • Check if the vehicle's power socket is active (e.g., vehicle ignition is on).
    • Try the charger in a different vehicle power socket if available.
  • Device Not Charging or Charging Slowly:
    • Ensure your charging cable is not damaged and is compatible with fast charging.
    • Verify your device supports the fast charging protocols offered by the charger.
    • If charging two devices, note that simultaneous output is 24W, which may be slower than single-port fast charging.

If issues persist, please contact customer support.

7. Specifications

Product parameter table with model, input/output specs, dimensions

Figure 8: Product Parameter Details

FeatureSpecification
ModelDLP4006B/93
Input12-24V
USB-C Output5V/2.4A, 9V/3A, 15V/2A, 12V/2.5A, 20V/1.5A
USB-A Output4.5V/5A, 5V/4.5A, 9V/3A, 12V/2.5A
Total Charging Power30W (Max)
Simultaneous Output (USB-A + USB-C)24W
Dimensions (Length x Width x Height)40mm x 24mm x 20mm
MaterialAll Aluminum Alloy
Certification3C Safety Certification
Supported ProtocolsPD3.0, QC4.0, QC3.0, SCP, PPS

8. User Tips

  • For optimal fast charging performance, always use high-quality USB cables that support the fast charging protocols (e.g., Power Delivery, Quick Charge) compatible with your device and the charger.
  • While the charger is designed for low-temperature operation, it's normal for the charger and your device to feel slightly warm during intensive fast charging.
  • The compact design allows the charger to sit flush in most cigarette lighter sockets, providing a neat appearance.

9. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller or the authorized service center. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.