GGBEE LED Makeup Mirror Lamp

Contents

GGBEE LED Makeup Mirror Lamp

Model: LED Makeup Mirror Lamp

Brand: GGBEE

Introduction

The GGBEE LED Makeup Mirror Lamp is a versatile and portable lighting solution designed to provide optimal illumination for various tasks. Featuring touch dimming, three adjustable color temperatures, and a rechargeable battery, this lamp offers convenience and flexibility. Its magnetic installation allows for easy placement in multiple scenarios, including bathrooms, bedrooms, and closets.

Safety Information

  • Keep the product out of reach of children.
  • Do not use the product in high temperatures or high humidity environments.
  • Ensure the charging voltage is 5V.
  • Do not attempt to replace the LED light source yourself. If the light source reaches its end of life, the entire luminaire should be replaced by a qualified professional.

Package Contents

  • LED Makeup Mirror Lamp (1 unit)
  • Magnetic Base with 3M double-sided adhesive (1 unit)
  • USB Charging Cable (1 unit)

Setup Instructions

The LED Makeup Mirror Lamp offers a simple, drill-free installation method using its magnetic base.

  1. Prepare the Surface: Ensure the desired installation surface is clean, dry, and smooth.
  2. Attach Magnetic Base: Tear off the high-adhesive double-sided tape from the back of the magnetic base. Fix the base firmly in the desired position.
  3. Mount the Lamp: Place the lamp body close to the installed magnetic base. The strong magnetic attraction will securely hold the lamp in place.
Three steps showing magnetic installation of the LED lamp.
Installation involves peeling adhesive tape, placing the magnetic base, and attaching the lamp.

The lamp can also be directly adsorbed onto any iron surface without the separate base.

Operating Instructions

Power On/Off

  • Locate the second-gear toggle switch on the back of the lamp.
  • Slide the switch to 'ON' for open mode (lamp can be operated).
  • Slide the switch to 'OFF' for closed mode (lamp is off and cannot be operated via touch).

Light Adjustment (Touch Switch)

Once the back toggle switch is in the 'ON' position, use the touch switch on the front of the lamp:

  • Short Press: Adjusts between three color temperatures: white light, warm light, and natural light.
  • Long Press: Activates stepless dimming. The light will gradually change from slightly bright to full brightness, allowing you to set the appropriate lighting level.
Hand touching the power button on the LED lamp, showing brightness adjustment from 1% to 100%.
Long press the touch button for stepless dimming, adjusting brightness from 1% to 100%.
Images showing the LED lamp emitting white light, warm light, and natural light.
Adjustable 3-speed color temperature (white, warm, natural) for different scenarios.

Charging

The lamp has a built-in polymer lithium battery. Connect the provided USB charging cable to the lamp's USB port and a 5V power source (e.g., mobile phone charger, computer USB interface).

  • Charging Indicator: A red light will be on while charging.
  • Fully Charged Indicator: A green light will be on when fully charged.
  • The lamp can be used while it is plugged in and charging.
Images showing the LED lamp being used while charging and while plugged in.
The lamp can be used fully charged or while plugged in via USB.

Rotation

The lamp head can be rotated 90 degrees on its magnetic base to adjust the direction of light as needed.

LED lamp rotating 90 degrees on its magnetic base.
The lamp head can be rotated 90 degrees for optimal light direction.

Maintenance

  • To clean the lamp, wipe it gently with a soft, dry cloth.
  • Do not use abrasive cleaners or solvents, as these may damage the surface.
  • Keep the USB charging port free from dust and debris.

Troubleshooting

ProblemPossible CauseSolution
Lamp does not turn on.Back toggle switch is OFF.Slide the back toggle switch to 'ON'.
Lamp does not turn on.Battery is depleted.Charge the lamp using the provided USB cable.
Light is not dimming or changing color.Back toggle switch is OFF.Ensure the back toggle switch is in the 'ON' position.
Light is not dimming or changing color.Touch sensor issue.Ensure your finger is clean and dry when touching the sensor. Try restarting the lamp by toggling the back switch.
Lamp not charging.USB cable or power source issue.Check if the USB cable is properly connected. Try a different USB cable or power adapter.

Specifications

FeatureDetail
Product NameLED Strip Touch Light
Input VoltageDC5V
Power Supply5V-1A
Rated Voltage5V
Product Power1.5-2.8W
Rated Current600mA
Lithium Battery Capacity1200 mAh
Number of LED Beads28
Light Source2835 LED bulbs
Luminous Flux60-249 lumens
Light ColorWhite light / Warm light / Natural light (3-speed color temperature)
Product Size35mm * 48mm * 300mm (Length: 30cm, Width: 5cm, Height: 3.8cm)
Body MaterialABS
Lampshade MaterialEye protection PC (Frosted matte)
Installation MethodSelf-contained magnetic, Wall Mounted
Is DimmableYes (Stepless dimming)
Is Bulbs IncludedYes
OriginMainland China
Diagram showing dimensions (30cm length, 5cm width, 3.8cm height) and a table of product parameters.
Detailed product dimensions and specifications are provided for the LED Strip Touch Light.

User Tips

  • Users appreciate the sufficient light output for various tasks.
  • The easy magnetic installation is a highly valued feature.
  • The convenience of USB recharging makes the lamp highly portable and easy to maintain.
  • While some users might expect a brighter light, the lamp is generally considered very helpful for its intended purposes.

Warranty & Support

For detailed warranty information and support, please refer to the official product documentation. A comprehensive user manual is available in PDF format for download. You can access the PDF manual here.

Product Demonstration Video

Watch this video for a quick overview of the LED Makeup Mirror Lamp's features, including its magnetic attachment, 90-degree rotation, and adjustable light settings.

© 2023 GGBEE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.