Suetlcoity C-Class W205 2015-2019

Contents

User Manual

Car Door Audio Tweeter Cover

Brand: Suetlcoity

1. Product Overview

This car decoration accessory is designed to enhance your vehicle's aesthetic appeal while protecting vulnerable surfaces from scratches, dust, and minor impacts. The product features high-quality 3M adhesive tape for secure, long-lasting installation without damaging your car's original finish.

The covers are made from durable stainless steel and are designed for Mercedes-Benz C-Class W205 models manufactured between 2015 and 2019.

2. Installation Instructions

2.1 Preparation (Critical for Strong Adhesion)

Note: Proper surface preparation ensures maximum bonding strength of 3M tape.

  1. Choose a clean, dry, and well-ventilated area (avoid direct sunlight or humid environments).
  2. Clean the target surface with the provided alcohol wipe (or 50-70% isopropyl alcohol solution) to remove dust, grease, and fingerprints.
  3. Allow the surface to air-dry completely (1-2 minutes, no wiping after cleaning).
  4. Ensure the installation temperature is between 15°C-35°C (59°F-95°F) – low temperatures reduce adhesive effectiveness.

2.2 Step-by-Step Installation

  1. Peel off the red protective film from the 3M tape (avoid touching the adhesive surface with bare fingers).
  2. Align the accessory with your desired position.
  3. Press firmly on the entire surface of the accessory for 30 seconds – apply a minimum pressure of 15 lbs (6.8 kg) to activate the adhesive.
  4. Do not move or remove the accessory within 24 hours – this allows the adhesive to fully cure for permanent bonding.

!!! Important Notice:

Some products in our store are OEM replacement parts, which require removing the original parts before installation. Please confirm the car model, year, configuration and chassis code to ensure full compatibility before installation.

Before and after installation of the tweeter cover
Comparison showing the car door audio area before and after installing the tweeter cover.
Back of the tweeter cover showing 3M adhesive tape
The reverse side of the tweeter cover, highlighting the pre-applied 3M adhesive tape for installation.

3. Functions & Benefits

3.1 Decoration Function

  • Enhances vehicle appearance with a stylish design.
  • Customizes your car to reflect personal taste without permanent modifications.

3.2 Protection Function

  • Shields car surfaces from scratches, scuffs, and minor collisions.
  • Prevents dust accumulation and simplifies cleaning (wipe with a damp cloth).
  • No tools, no drilling, removable without residue.
Installed tweeter cover with detailed view
The tweeter cover installed on a car door, showing its aesthetic integration and detailed design.
Side view of installed tweeter cover
A side perspective of the tweeter cover after installation, highlighting its sleek profile.

4. Safety Warnings

Warning!

  1. Do not install on airbag deployment areas (e.g., steering wheel, door panels near airbags) – may interfere with safety systems.
  2. Avoid blocking driver's view (e.g., front windshield, rearview mirrors) – violates traffic safety regulations.
  3. Keep away from children under 36 months – small parts may pose choking hazards.
  4. Do not use near open flames or high-temperature sources (adhesive may weaken above 60°C).

5. Maintenance & Care

  1. Clean the accessory with a soft, damp cloth – avoid abrasive cleaners or solvents.
  2. Check the adhesion monthly; reapply pressure if edges lift (clean the surface first if needed).
  3. For removal: Use 3M adhesive remover or heat the tape gently with a hair dryer (low heat) to soften the bond, then peel off slowly.

6. Troubleshooting

ProblemSolution
Accessory falls off1. Recheck surface cleanliness; 2. Ensure installation temperature is adequate; 3. Apply more pressure during installation.
Adhesive residue leftWipe with alcohol or 3M adhesive remover.
Misalignment after installationRemove within 5 minutes (before adhesive cures) and reposition; after 24 hours, follow removal instructions first.

7. Specifications

AttributeDetail
Brand NameSuetlcoity
Item TypeInterior Mouldings
MaterialStainless Steel
ColorSilvery
Applicable ModelsMercedes-Benz C-Class W205
Applicable Years2015-2019
External Testing CertificationISO9001
Package Length14 cm
Package Width14 cm
Package Height3 cm
Package Weight0.16 kg

8. User Tips

  • For best results, ensure the car's interior is thoroughly cleaned and free of any car wax or polish before installation.
  • If installing in colder weather, gently warm the adhesive tape with a hairdryer before peeling the film to improve initial tack.
  • After pressing the covers firmly, avoid washing the car or exposing the installed area to excessive moisture for at least 24-48 hours to allow the adhesive to fully cure.

9. Warranty & Support

After-Sales Service

After-sales support is available for manufacturing defects, not improper use, within 15 days after signing for the product.

Contact Us

For a detailed user manual in PDF format, please refer to the official document: User manual (PDF)

Copyright © Carcartrim Store. All rights reserved. This manual is subject to change without prior notice. For the latest version, visit our store.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.