Aramox GS03230

Contents

Heavy Duty 240V 16A Four Port Air Compressor Pressure Switch Control

Model: GS03230

1. Introduction

This manual provides essential information for the safe and effective use of your Heavy Duty 240V 16A Four Port Air Compressor Pressure Switch Control. This switch is designed for air compressors, offering easy installation and convenient operation with a durable, high-quality construction. It features a red ON/OFF switch knob and four female air inlet ports.

Air compressor pressure switch with text overlay
Figure 1: Heavy Duty Air Compressor Pressure Switch Control

2. Safety Warnings

  • WARNING: To avoid danger of suffocation, keep this plastic bag away from babies and children.
  • Always disconnect power to the air compressor before installing, servicing, or performing any maintenance on the pressure switch.
  • Ensure all electrical connections are made by a qualified professional and comply with local electrical codes and standards.
  • Do not exceed the maximum voltage and current ratings specified for this device.
  • Operate the switch within the specified pressure range (90-120 PSI).
  • Keep the switch away from water, moisture, and flammable materials.

3. Specifications

Feature Detail
Product Name Heavy Duty 240V 16A Four Port Air Compressor Pressure Switch Control 90PSI -120PSI
Model GS03230
Batch/Serial Number ALI9627218407
Type Air Pressure Control Switch (Four Port Switch)
Max. Voltage 240V
Current 16A
Lifetime 5,000,000,000 times
Pressure Range 90-120PSI
Thread Size 12MM
Size (Approx.) 13 x 8 x 5cm / 5.1 x 3.1 x 1.9inch
Weight 306g
Material Plastic
EU LVD Voltage Below 50Vac or 75Vdc
High-concerned chemical None
Certification NONE

4. Package Contents

The package includes:

  • 1 x Air Compressor Switch Control

5. Setup and Installation

The pressure switch is designed for easy installation. It features four female air inlet ports for connection to your air compressor system. Ensure all connections are secure and comply with local electrical codes.

  1. Power Disconnection: Before beginning installation, ensure the air compressor is completely powered off and disconnected from its power source.
  2. Mounting: Securely mount the pressure switch in a suitable location on your air compressor system.
  3. Air Connections: Connect the air lines to the four female air inlet ports. Ensure connections are tight to prevent leaks.
  4. Electrical Wiring: Connect the electrical wiring according to the air compressor's wiring diagram and local electrical regulations. Ensure proper grounding.
  5. Final Check: Double-check all connections (air and electrical) for security and correctness before restoring power.
Internal view of the pressure switch with cover removed
Figure 2: Internal mechanism and ports for wiring and air connections.
Bottom view showing the four female air inlet ports
Figure 3: Bottom view of the pressure switch showing the four female air inlet ports.

6. Operation

The unit is equipped with a red ON/OFF switch knob for convenient control of your air compressor.

  • To turn ON: Rotate the red knob to the 'ON' position. This will allow the pressure switch to control the air compressor based on the set pressure range.
  • To turn OFF: Rotate the red knob to the 'OFF' position. This will manually shut off the air compressor, regardless of the pressure level.
Close-up of the red ON/OFF knob
Figure 4: Red ON/OFF switch knob with indicators.

7. Maintenance

To ensure optimal performance and longevity of your air compressor pressure switch, regular inspection is recommended:

  • Periodically check all air and electrical connections for tightness. Loose connections can lead to leaks or electrical issues.
  • Keep the unit clean and free from dust, dirt, and debris. A build-up of foreign material can affect the switch's operation.
  • Avoid exposing the switch to excessive moisture, corrosive environments, or extreme temperatures, which can degrade its components.
  • Inspect the red ON/OFF knob for any signs of wear or damage.

8. Troubleshooting

If the pressure switch is not functioning as expected, consider the following common issues and solutions:

  • No Power to Compressor:
    • Check all electrical connections to ensure they are secure.
    • Verify that the main power supply to the compressor is active.
    • Ensure the red ON/OFF knob is in the 'ON' position.
  • Compressor Not Reaching Desired Pressure / Not Shutting Off:
    • Verify that the pressure settings are within the specified 90-120 PSI range.
    • Check for air leaks in the system, especially around the switch's ports.
    • Inspect the internal mechanism of the switch (refer to Figure 2) for any obstructions or damage that might prevent proper engagement/disengagement. Do not attempt internal repairs unless qualified.
  • Air Leaks Around Switch:
    • Tighten all air connections to the four ports.
    • Ensure appropriate thread sealant was used during installation.

9. User Tips

Based on feedback from other users, this pressure switch is noted for its ease of fitting and reliable operation. Many users have found it to be a perfectly functional replacement or new installation component for their air compressor systems. Its straightforward design contributes to a hassle-free setup.

10. Warranty and Support

For technical support, product inquiries, or warranty information, please contact the manufacturer or the EU authorized representative using the details below:

Manufacturer:

  • Company Name: Zhongshan Beiqi Electric Co., Ltd.
  • Address: Ground Floor, No. 8, Ronghua South Road, Shakou, Xiaolan Town, Zhongshan City, Guangdong Province
  • Email: 17894243251@qq.com
  • Telephone: 86-17894243251

EU Authorized Representative:

  • Company Name: Kequ Technology s.r.o.
  • Address: Pražákova 1008/69, Štýřice, 63900 Brno, Jihomoravský kraj, Czech Republic
  • Email: christopher25106@outlook.com
  • Telephone: 420-123456789

A PDF version of the user manual is available for download: User manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.