Yeelight Sensor Night Light LED Strip

Contents

Yeelight Sensor Night Light LED Strip

User Manual

Model: Sensor Night Light LED Strip

1. Introduction

Thank you for choosing the Yeelight Sensor Night Light LED Strip. This intelligent lighting solution is designed to provide convenient, automatic illumination in various areas of your home. Featuring dual sensors (human body motion and ambient light), easy magnetic installation, and adjustable brightness, it enhances comfort and safety without the need for complex wiring.

2. Package Contents

  • Yeelight Sensor Night Light LED Strip (20cm, 40cm, or 60cm model)
  • USB-C Charging Cable
  • User Manual

3. Product Overview

Familiarize yourself with the components of your Yeelight Sensor Night Light LED Strip:

Yeelight Sensor Night Light installed under a cabinet

Figure 3.1: Yeelight Sensor Night Light in use, highlighting key features.

Three different lengths of Yeelight Sensor Night Lights

Figure 3.2: Available sizes of the Yeelight Sensor Night Light.

Component Identification:

  • Light Body: The main LED strip providing illumination.
  • Human Body Sensor (PIR): Detects motion to automatically turn the light on.
  • Photosensitive Sensor: Detects ambient light levels, preventing the light from turning on during daylight.
  • Charging Port (USB-C): For recharging the internal battery.
  • Indicator Light: Shows charging status (red for low battery/charging, green for fully charged).
  • Magnetic Sheets: Adhesive-backed metal plates for mounting.

4. Setup and Installation

The Yeelight Sensor Night Light features a simple magnetic mounting system, requiring no wiring or complex tools.

Installation Steps:

  1. Choose Location: Select a clean, dry, and smooth surface where you want to install the light. Common areas include under cabinets, inside wardrobes, along hallways, or under beds.
  2. Prepare Surface: Clean the chosen surface thoroughly to ensure it is free of dust, grease, and moisture. This will ensure optimal adhesion of the magnetic sheets.
  3. Attach Magnetic Sheets: Peel off the protective film from the adhesive side of the magnetic sheets. Firmly press the sheets onto the prepared surface. Ensure they are spaced appropriately to hold the light strip securely.
  4. Mount Light Strip: The back of the Yeelight Sensor Night Light is magnetic. Simply align the light strip with the installed magnetic sheets and allow it to snap into place.
Hands demonstrating magnetic attachment of the light strip

Figure 4.1: Magnetic mounting in two simple steps.

Important Note:

  • The adhesive on the magnetic sheets is strong and generally not reusable. Tearing it off may damage the paste surface. Please confirm the position before pasting.
  • Ensure the human body sensor is facing the area where motion is expected for optimal performance.

5. Operating Instructions

The Yeelight Sensor Night Light operates automatically based on its built-in sensors.

Automatic Operation:

  • Motion Detection: The light will automatically turn on when human motion is detected within its sensing range.
  • Day/Night Recognition: The integrated photosensitive sensor ensures the light only activates in dark environments, conserving battery during daylight hours.
  • Auto-Off: After a period of no motion detection, the light will automatically turn off.
Diagram showing motion sensor detection area on a wall

Figure 5.1: Intelligent human body induction range.

Light strip in a wardrobe, demonstrating day/night recognition

Figure 5.2: Smart recognition of day and night for power saving.

Charging the Device:

When the battery is low, the indicator light will turn red. Connect the provided USB-C cable to the charging port on the light strip and plug the other end into a standard USB power adapter (not included). The indicator light will be red during charging and turn green once fully charged.

Video 5.1: Product demonstration showing installation and motion sensing functionality.

6. Maintenance

Cleaning:

To clean the light strip, gently wipe it with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.

Battery Care:

  • Charge the device fully before first use.
  • Avoid completely draining the battery frequently to prolong its lifespan.
  • If storing the device for an extended period, charge it to about 50% and recharge every few months.

7. Troubleshooting

ProblemPossible CauseSolution
Light does not turn onBattery is depleted
Ambient light is too bright
Sensor is obstructed
Recharge the device
Ensure the environment is dark enough
Clear any obstructions from the sensor
Sensor not detecting motionOut of range
High ambient temperature
Sensor is dirty
Move closer to the sensor
Avoid using in areas above 35°C
Gently clean the sensor area
Light flickers or is dimLow batteryRecharge the device fully

8. Specifications

FeatureL20 ModelL40 ModelL60 Model
Product ModelYLCT01YLYLCT02YLYLCT03YL
Dimensions (LxWxH)200 x 39 x 9 mm400 x 39 x 9 mm600 x 39 x 9 mm
Rated Power1.8 W2.3 W3.5 W
Battery Capacity1100 mAh1500 mAh2200 mAh
Rated Input5V=1A
Color Temperature2700K
Working Temperature-10°C to +40°C
Working Humidity0% to 85% RH
Continuous Lighting TimeUp to 5 hours
Induction Usage Time4-6 months (based on 3 activations per day)
Body MaterialAluminum Alloy + ABS
Charging MethodUSB-C
Charging TimeApprox. 2-4 hours
Sensor Range0-4m directly in front, 120° horizontal, 0-2m laterally

9. User Tips

  • For optimal motion sensing, ensure the sensor is not obstructed and is positioned to face the primary direction of movement.
  • The light strip can be easily removed from its magnetic mounts for temporary handheld lighting or for convenient recharging.
  • Consider installing multiple strips in longer areas like hallways or large wardrobes for seamless illumination.

10. Warranty and Support

Your Yeelight Sensor Night Light LED Strip comes with a manufacturer's warranty. Please refer to the original packaging or the full PDF user manual for detailed warranty terms and conditions. For technical support or service inquiries, please contact Yeelight customer service through their official website or authorized channels.

A comprehensive user manual in PDF format is available for download at this link.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.