Introduction
Thank you for choosing KINGSOFE 880/H27 LED Fog Lights. These high-performance LED bulbs are designed to provide superior illumination and enhanced safety in adverse weather conditions. Featuring a 3000K golden yellow light, IP68 waterproof rating, and efficient heat dissipation, these fog lights offer a reliable and durable lighting solution for your vehicle. This manual provides essential information for safe installation, operation, and maintenance of your new LED fog lights.
Safety Information
Please read and understand all safety instructions before installing or using this product. Failure to follow these instructions may result in property damage, personal injury, or voiding the product warranty.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
Package Contents
Upon opening your package, please ensure all items are present and undamaged:
- 2x KINGSOFE 880/H27 LED Car Bulbs
Specifications
| Attribute | Value |
|---|---|
| Socket Type | 880/H27 LED |
| Wattage | 120W/Pair (High Power) |
| Voltage | DC 9V-24V |
| Color Temperature | 3000K Yellow |
| Light Source | 12 PCS LED CHIP |
| Material | Aviation Aluminum |
| Life Span | Above 60,000 hours |
| Waterproof Rating | IP68 |
| Rated Current | 1.5A-10A |
| Operating Temperature | -40℃ to +135℃ |
| Origin | Mainland China |
| Warranty | 2 Years |
Note: The product features a 1:1 mini size design, closely matching original halogen bulbs for easy fitment.
Key Features
- 3000K Golden Yellow Super Penetration: Provides strong fog, rain, and snow penetration for clearer and safer driving visibility in harsh weather.
- Ultra-Bright Illumination: Equipped with 12PCS LED highlight wicks for super brightness, wider vision, and longer irradiation distance, ensuring a perfect focus beam pattern without dark spots.
- All-Weather Durability: IP68 waterproof design ensures normal operation in rainy, foggy, sandy, and snowy conditions, enhancing driving safety.
- Efficient Heat Dissipation: Constructed with premium aviation aluminum alloy for excellent heat dissipation, extending lamp life and maintaining stable brightness.
- Safe Anti-Glare Beam: Designed to provide a standard beam pattern with extra low beam light, preventing glare for oncoming traffic and ensuring safer road driving.
- Hassle-Free Quick Installation: Simple 5-step plug-and-play setup, requiring no professional tools for DIY operation.
- Automotive-Grade Certified Quality: RoHS certified, meeting strict standard requirements for automotive use in both material and performance.
Installation Guide
The KINGSOFE 880/H27 LED Fog Lights are designed for a hassle-free, plug-and-play installation. The process typically takes only 5 minutes per bulb.
Step-by-Step Installation:
- Take out the LED socket: Carefully remove the LED bulb from its packaging.
- Remove the original car lights: Disconnect and remove the existing fog light bulb from your vehicle's housing.
- Connect the plug of the light bulb: Plug the new LED fog light into the vehicle's wiring harness.
- Fix the position of the light bulb securely: Insert the LED bulb into the fog light housing.
- Rotate Slightly and make it fixed: Gently rotate the bulb to ensure it is properly seated and locked into place.
- Correct the power supply and test: Turn on your vehicle's fog lights to verify proper function and alignment.
Important Note: Please check the size of your original bulbs on your vehicle before purchasing to ensure compatibility.
Operating Instructions
Once installed, your KINGSOFE LED Fog Lights operate like your vehicle's standard fog lights. Activate them using your vehicle's fog light switch. The 3000K yellow light is specifically designed to improve visibility by reducing glare and enhancing contrast in foggy, rainy, or snowy conditions.
Ensure your vehicle's electrical system is functioning correctly to provide stable power to the LED bulbs.
Maintenance
These LED fog lights are designed for durability and require minimal maintenance. Follow these general guidelines:
- Cleaning: Periodically clean the surface of the fog light lenses with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners that could scratch the lens.
- Inspection: Regularly inspect the bulbs and wiring for any signs of damage, loose connections, or corrosion.
- Replacement: Due to their long lifespan, frequent replacement is not expected. If a bulb fails, replace it with another KINGSOFE 880/H27 LED Fog Light to maintain consistent performance.
Troubleshooting
If you encounter any issues with your LED fog lights, refer to the following common troubleshooting tips:
- Lamp Does Not Light Up: The lamp has a polarity. If it does not shine upon installation, please change the positive and negative connections of the lamp. Reversing the polarity should resolve the issue.
- Error Codes on Vehicle Dashboard: These LED fog lights come with built-in Canbus load resistors to avoid error codes on most vehicles (suitable for 99% of car CANBUS systems). If you still experience an error code, your vehicle may require additional external CANBUS decoders. Consult a professional auto electrician if the issue persists.
- Dim or Flickering Light: Check all connections to ensure they are secure and free from corrosion. Ensure your vehicle's battery and charging system are providing adequate and stable voltage.
User Tips
- For optimal visibility in heavy fog, ensure your headlights are on low beam in conjunction with your fog lights.
- Always verify the correct bulb type for your vehicle's make and model before purchasing and installing.
- Consider testing the lights in a dark, safe environment after installation to ensure proper beam pattern and alignment.
Certifications
The KINGSOFE 880/H27 LED Fog Lights are certified to meet various international standards, ensuring quality and safety:
- CE: Conforms to European health, safety, and environmental protection standards.
- FCC: Complies with Federal Communications Commission regulations for electronic devices.
- RoHS: Restricts the use of hazardous substances in electrical and electronic equipment.
- E-Mark: Indicates compliance with relevant European vehicle regulations.
Warranty and Support
Your KINGSOFE 880/H27 LED Fog Lights come with a 2-year warranty from the date of purchase, covering manufacturing defects and material flaws under normal use. Please retain your proof of purchase for warranty claims.
For further assistance, technical support, or to access the full user manual in PDF format, please refer to the official product documentation available online: