KINGSOFE H3 LED

Contents

H3 LED Fog Lamp User Manual

Model: H3 LED | Brand: KINGSOFE

1. Introduction

Thank you for choosing the KINGSOFE H3 LED Fog Lamps. These super bright, fanless LED DRL lights are designed for easy plug-and-play installation, offering a 1:1 mini size design compared to original bulbs. Featuring a 3000K golden yellow light, they provide superior penetration in adverse weather conditions and boast an IP68 waterproof rating for all-weather durability. This manual provides essential information for the safe and effective use of your new LED fog lamps.

Two H3 LED fog lamps with a car in the background, highlighting features like Quick Start, Highlight Wick, Quick Install, and IP68 Waterproof.

Image: KINGSOFE H3 LED Fog Lamps with key features.

2. Package Contents

  • 2x H3 LED Car Bulbs

3. Specifications

Feature Specification
Socket Type H3 LED
Wattage 120W/Pair
Operating Voltage DC 9V-12V (Rated: DC 12-24V)
Rated Current 1.5A-10A
Color Temperature 3000K Yellow
Light Source 12 PCS LED CHIP
Material Aviation Aluminum
Life Span Above 60,000 hours
Operating Temperature -40℃ to +135℃
Waterproof Rating IP68
Certification E-Mark, CE, FCC, RoHS
Origin Mainland China
Diagram illustrating the LED Highlight Wick with 12 PCS LED CHIP and spotlight effect, emphasizing 3000K yellow vision as sunlight.

Image: LED Highlight Wick with 12 PCS LED CHIP for 3000K yellow vision.

4. Safety Information & FCC Compliance

Important Notes:

  • Please check the size of your bulbs on your vehicle before purchasing to ensure compatibility.
  • The lamp has a polarity. If it does not illuminate upon installation, please reverse the positive and negative connections.
  • Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

FCC Compliance Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

5. Installation Guide

The KINGSOFE H3 LED Fog Lamps are designed for quick and easy plug-and-play installation, typically taking only 5 minutes. No professional tools are needed for DIY operation.

  1. Take out the LED socket: Carefully remove the new LED bulb from its packaging.
  2. Remove the original car lights: Disconnect and remove your vehicle's existing fog lamp bulbs.
  3. Connect the plug of the light bulb: Plug the connector of the new LED bulb into your vehicle's wiring harness.
  4. Fix the position of the light bulb securely: Insert the LED bulb into the fog light housing.
  5. Rotate Slightly and make it fixed: Gently rotate the bulb to ensure it is properly seated and locked into place.
  6. Correct the power supply and test: Turn on your vehicle's fog lights to test functionality. If the light does not turn on, check the polarity (see Troubleshooting section).
Six-step visual guide for Quick Installation of the H3 LED fog lamp.

Image: Quick Installation steps for H3 LED Fog Lamps.

Diagram showing 1:1 design comparison of LED lamp to halogen lamp, indicating consistent light source position and buckle height for easy fitment.

Image: 1:1 Design for easy replacement of halogen lamps.

6. Operation

These H3 LED fog lamps are designed to enhance visibility during adverse weather conditions such as fog, rain, or snow. The 3000K golden yellow light offers superior penetration compared to white light, allowing for clearer and safer driving. The perfect focus beam pattern ensures ultra-bright illumination with a wider vision and longer irradiation distance, without any dark spots or glare to oncoming traffic.

Comparison image of LED light beam pattern versus yellow halogen lamp beam pattern, showing correct beam and no blinding for LED.

Image: LED Lamp vs Halogen Lamp beam pattern comparison.

7. Maintenance

The KINGSOFE H3 LED Fog Lamps are built for durability and minimal maintenance. The IP68 waterproof design ensures reliable operation in harsh environments, protecting against water and dust ingress. The use of high-quality aviation aluminum material provides excellent heat dissipation, which is crucial for protecting the LED chips and extending the overall lifespan of the lamps to over 60,000 hours. Regular cleaning of the lamp surface with a soft, damp cloth can help maintain optimal light output.

Illustration of Good Heat Dissipation, showing high-quality aluminum material and airflow for longer lamp life and brightness.

Image: Good Heat Dissipation design with aviation aluminum.

Image demonstrating IP68 Waterproof capability, with the LED fog lamp functioning in rain, fog, sand, and snow conditions.

Image: IP68 Waterproof rating for all-weather use.

8. Troubleshooting

  • Lamp does not light up: Check the polarity. If the lamp does not shine, change the positive and negative connections.
  • Error codes on vehicle dashboard: These lamps come with built-in Canbus load resistors, making them suitable for 99% of vehicles with CANBUS systems to avoid error codes. If an error persists, consult a professional auto electrician.
  • Interference with radio/TV reception: Refer to the FCC Compliance Statement in Section 4 for measures to correct potential interference.

9. User Tips

  • Secure Fitment: Some users have reported that the black plastic connector in front and behind the iron base-fixing plate might not tighten the bulb's base tightly, leading to shaking on irregular roads. Ensure the bulb is securely fixed and consider adding a small amount of heat-resistant sealant or tape around the base if you experience looseness, to prevent movement and maintain a stable beam pattern.
  • Polarity Check: Always test the bulb before fully securing it in the housing. If it doesn't light up, simply reverse the connection due to polarity.
  • Vehicle Compatibility: Double-check your vehicle's bulb size and type before purchase to ensure proper fitment and function.

10. Warranty & Support

This product comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. For any issues or support, please contact your retailer.

A detailed user manual in PDF format is also available for download: View User Manual (PDF)

11. Certifications

This product complies with the following standards:

  • E-Mark
  • CE
  • FCC
  • RoHS
Certificates of Compliance for CE, FCC, and RoHS standards.

Image: Product Certifications.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.